生物陶瓷内部成孔与贯通方式的研究

多孔羟基磷灰石（HA）陶瓷内部结构满足细胞向内部渗透、迁移、粘附和生长的条件。实验探讨了HA陶瓷内部成孔与孔道连结的机理与技术，采用添加制孔剂和固化纤维2种方法制备系列样品，测算了样品气孔率，并对微观结构进行扫描电镜观察，最终确定可人工调控内部结构的HA陶瓷成孔与贯通技术。     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

核壳型乳液聚合研究进展

综述了近年来核/壳结构聚合物乳液的聚合工艺、性能及核/壳结构的表征方法进行,讨论了影响核/壳结构聚合物乳胶粒子形态的各种因素。     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

气泡釉的研制

研制了一种从石灰釉中分离出来的缺陷釉—气泡釉。气泡釉由于其特殊的性质,不适用于强度要求高的建陶,一般用于普通的日用瓷或艺术瓷。主要利用长石、高岭土、方解石、白云石和石英等常用原料,通过调整各种原料的用量,改变釉层厚度、烧成制度等方法来寻求最佳的气泡釉效果。     

马来酸酐接枝 SEBS对聚丙烯 / 碳纳米管复合材料性能的影响

采用球磨和熔融共混法，制备了聚丙烯（PP）／碳纳米管（CNT）／马来酸酐接枝SEBS（MA－SEBS）复合材料，结果表明，MA－SEBS促进了CNT在PP基体中的分散，形成完善的逾渗网络，改善了PP／CNT复合材料的抗静电性，提高了CNT对PP的增强作用，对PP／CNT复合材料有明显的增韧作用。     

Electrodeposition of Pd–Ag alloy nanowires on highly oriented pyrolytic graphite

This paper reports findings of an investigation of Pd–Ag alloy nanowires on the step edges of highly oriented pyrolytic graphite (HOPG) by electrochemical deposition at room temperature. Scanning electron microscopy (SEM) images reveal that these alloy nanowires (109–430 nm) are uniform in diameter, and have lengths up to 100–500 μm. The electrodeposition process involves the initial formation of nanowires induced at the step edges of the oxidized HOPG substrate at a very negative potential and subsequent growth at a constant low current density to coalesce the discontinuous nanowires. Alloy nanowires with a 20–25% silver content can be obtained when the ratio of Pd and Ag in the solution is carefully controlled. The SEM images demonstrate that the alloy nanowire arrays are continuous, parallel, ordered, well-aligned and have a narrow distribution of diameters. The Pd–Ag alloy nanowire arrays are promising materials for fabricating hydrogen nanosensors.     

PMN-PZT压电陶瓷的凝胶注模研究

对三元系PMN—PZT压电陶瓷的凝胶注模成形工艺进行了研究,重点讨论了分散剂加入量、pH值、球磨时间与注模浆料流变之间的关系,当分散剂用量为0 .95 %～1 .0 5 % ,pH值为10 .5～11 .5 ,球磨时间为8h时,可以制备出固相含量为5 5 % ,粘度小于1Pa·s的PMN -PZT压电陶瓷悬浮体。将凝胶注模与传统模压成形工艺制备的样品进行了比较,通过扫描电镜(SEM )显微形貌分析和电学性能测定。结果表明:凝胶注模工艺制备的样品与模压工艺制备的样品相比较,其显微结构均匀致密、晶粒大小与晶界分布均匀,气孔率更小,电学性能更均匀。     

The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.     

优质饮用水直接进户试验研究

针对目前上海市自来水水质存在的不足,试验了三种水质深度处理工艺。试验证明,该三种工艺对浊度、色度、耗氧量、余氯、氨等指标均有明显的去除效果。在其它水质指标方面,符合建设部2002年“水质目标”及欧盟水质标准的要求,最后确定了一种工艺用于小区供水。