影响碲镉汞晶体电子迁移率的主要因素

通过把迁移率的实测值与影响ＨｇＣｄＴｅ晶体电子迁移率的主要散射机构进行对比，得出结论：位错是ＨｇＣｄＴｅ晶体低温电子迁移率降低的主要原因。     

放大器En-In噪声模型的完善及其与Rn-Gn噪声模型的关系

目前，微波低噪声放大器设计中采用的Ｒｎ－Ｇｎ噪声模型只适用于高频、窄带和源导纳（Ｇｓ≠０）情况，其应用范围有限，特别是不适用于低频段的低噪声放大器设计。本文对文献［１］提出的Ｅｎ－Ｉｎ噪声模型作了改进，使其不仅适用于高频、窄带，而且也适用于低频、宽带放大器的低噪声设计。进而推导出放大器Ｅｎ－Ｉｎ噪声模型与Ｒｎ－Ｇｎ噪声模型的等价关系，给出放大器Ｅｎ－Ｉｎ噪声模型的测量方法及实测结果。     

大小样品在液氮中的淬冷沸腾换热比较研究

分析了大小样品在液氮中的淬冷沸腾换热特性。大小样品的淬冷沸腾换热有着明显的差别，小样品的热流密度比大样品的明显高得多。小样品的淬冷沸腾有一起始段，其温降高达６０Ｋ。从实验结果还可以看到，小样品的Ｌｅｉｄｅｎｆｒｏｓｔ点和临界热流点对应的壁面过热度明显比大样品的高。最后还分析了样品直径对临界热流密度的影响。     

水土保持工程施工阶段的设计变更

通过对水土保持工程施工阶段设计变更原因的分析，指出水土保持生态工程施工阶段变更的必要性和建设、监理单位对变更管理的重要性。通过对变更设计的程序和原则进行的分析，阐述了变更设计涉及的几个主要问题。     

Ab initio calculations on the mechanism of isobutane and 2-butene alkylation reaction catalyzed by hydrofluoric acid

Ab initio method was employed to determine the mechanism of alkylation reaction of 2-butene with isobutane. The results indicated that 2-butene is rapidly protonated to form sec-butyl carbonium ion, which then reacts with isobutane to form tert-butyl carbonium ion. The resulting carbonium ion is then deprotonated to form isobutene that reacts rapidly with tert-butyl carbonium ion to form trimethylpentane (TMP) carbonium ion. Finally, the TMP⁺ carbonium ion is converted to TMP via the hydride transfer process. The transition states of the interactions were obtained by using the SCAN method (a calculation key word for potential energy surface) first and then the intrinsic reaction coordinates were traced using the Gaussian program. In addition, the energy changes and geometric parameters of the interactions were analyzed. The computed results indicated that the energy barriers are close to or less than zero for the interaction of isobutane with protonated 2-butene or for the interaction of tert-butyl carbonium ion with isobutene, suggesting rapid reaction steps of the carbonium ions. The 2,2,3-TMP is kinetically controlled, while the formation of 2,2,4-TMP is controlled by reaction equilibrium. The calculated results were in good agreement with the experimental results.     

The summary of researches on ADS in China

The conceptual study on the accelerator driven system (ADS) that lasted for about five years ended in 1999 in China. As one project of the National Basic Research Program of China (973 Program) in the energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five-year-program of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. The China Institute of Atomic Energy (CIAE), the Institute of High Energy Physics (IHEP), the Institute of Heavy Ion Physics in Peking University (PKU-IHIP) and other institutions jointly carried out the research. The research activities were focused on HPPA physics and technology, reactor physics of external source driven sub-critical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV was built. In reactor physics study, a series of neutron multiplication experimental study has been carried out and still being done. The VENUS facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. It’s a zero power sub-critical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator. The theoretical, experimental and simulation study on nuclear data, material properties and nuclear fuel circulation related to ADS is carrying on to provide the database for ADS system analysis. The main results on ADS related researches will be reported.     

雁栖水厂的规划与设计

雁栖水厂位于北京市怀柔区雁栖镇下庄村南，距怀柔县城6km，占地面积0．78hm^2．设计日供水能力5000t。雁栖水厂集中反映了北京市农村安全饮水工作的模式和经验，下面从规划、设计、管理等三方面对雁栖水厂进行介绍。     

从76届SEG年会看综合物化探技术的发展方向

文中在介绍76届SEG年会的展商、展台及会场专题报告与论文发布情况的基础上，阐述了参加本届SEG年会的体会，指出了重磁电技术发展的四个趋势：向海洋勘探技术方向发展、向复杂区综合勘探技术方向发展、向三维联合处理和三维可视化解释技术发展、向直接圈定和检测油气方向发展。     

超细分子筛材料的合成与应用研究进展

综述了近几年超细分子筛的合成与应用方面的研究进展,重点介绍了几种常用且研究较多的分子筛,主要包括Y,ZSM-5,β,Silicalite-1,ZSM-35,MCM-22等分子筛。对超细分子筛的合成方法及其在石化、环保和生物等领域的应用进行了介绍,并对分子筛复合材料的研究及应用的最新动态进行了评述,说明超细分子筛材料的应用领域仍在不断拓宽,超细分子筛复合材料的研究将会成为分子筛材料领域未来的重要发展方向。     

压缩式封隔器胶筒变形阶段力学分析

封隔器是常用试采井下工具,胶筒是封隔器中最重要的部件。将压缩式胶筒的变形分为自由变形和约束变形2个阶段,分析了其绝对体积变化规律,得到了使胶筒刚好与井壁接触的轴向力,据此可以确定最小坐封载荷;得到了井壁和中心管对胶筒的约束压力,在此基础上得到了压缩式胶筒的各个应力分量和第四相当应力,据此可以给出坐封力下胶筒的强度,确定合理的坐封力。实例计算解释了现场封隔器胶筒在坐封载荷作用下损坏的原因。