Water-soluble and amphiphilic polymers

Summary Three PEO-PSt-PEO triblock polymers and their parent ho-nopolystyrene have been studied by means of light scattering technique in chloroform, toluene and ethyl acetate. It has been found that the weight average molecular weights calculated by using the equation Mapp- were unbelievable negative values; and the largest deviation appeared for the sample with PEO mole content of about 50%. Data of PSt-PEO-PSt triblock polymers in literature have been quoted and discussed.     

采用变压精馏回收共沸剂的正丙醇-水共沸精馏模拟研究

本文研究了一种分离正丙醇-水的新型共沸精馏工艺,通过变压精馏的方法对夹带剂乙酸乙酯进行回收。本研究采用Aspen—Plus软件中的RADFRAC精馏模块,以NRTL活度系数方程和Hayden-O'connell逸度方程为热力学模型对本工艺流程进行模拟,讨论了塔板数、进料位置、进料量、回流比和进料温度等参数对产物精馏和共沸剂回收的分离效果的影响,优化得出最佳工艺参数。结果表明,当精馏塔的塔板数为40块,进料位置为34板,回流比为8,夹带剂与进料比为0.9:常压回收塔的塔板数为20块,进料位置为4板,回流比为0.1,减压回收塔和常压回收塔的压力分别设定为0.2 aim和1 atm时,产物正丙醇的纯度为99.22 mol%,回收的共沸剂纯度达到99.87 mo1%,本文对正丙醇的工业生产具有一定指导意义。     

基于云计算的预拌混凝土行业在线质量管理

以实现质量的科学化管理和实时的动态监测为目的,提出了预拌混凝土行业基于云计算的在线质量管理。通过分析预拌混凝土企业包括经营数据和生产实时数据等大量数据的存储、整合、分析、挖掘、利用等方面需求,以云计算为平台,运用人工智能（ AI）相关算法,实现了基于实际生产过程的质量预测,为解决影响混凝土强度及工作性能的多组分因素问题提供了思路和方法。提取云平台上的生产实时数据进行模拟实验,以C35的28天抗压强度为例,用1000组数据对网络进行训练,用100组数据对已训练的网络进行检验,结果证明了预测值的准确性,同时也验证了平台的可行性。     

采用主监视窗扩展技术的增强现实三维注册方法

在增强现实三维注册中,采用重新检测策略时顿卡现象严重。提出一种采用主监视窗扩展技术的增强现实三维注册方法。在检测阶段,引入特征点可信度和主监视窗,并设计主监视窗的分割、扩展和调控策略,大幅提升了计算速度;在跟踪阶段,采用基于图像金字塔的光流算法进行特征点跟踪。实验证明,该方法不仅有效缓解了顿卡现象,也提升了系统整体的实时性。     

Microstructure and Microchemistry of Polymer-Derived Crystalline SiC Fibers

Stoichiometric and near-stoichiometric silicon carbide fibers, derived from the polymer polycarbosilane, have been characterized by scanning Auger and transmission electron microscope techniques. Excess carbon usually appeared in the fibers, but it could be eliminated by controlling processing conditions. The fibers consisted mainly of submicrometer-sized SiC microcrystals, with a considerably twinned and stacking-faulted β-SiC structure. Free carbon, which appeared in the form of graphite, was the only detectable intergranular phase in the nonstoichioinetric SiC fibers, while the stoichiometric SiC fibers contained no detectable second phase whatsoever.     

基于Jpcap的Webmail邮件还原技术

基于Smtp和Pop3的邮件还原技术已经日臻成熟,而由于主要Webmail邮件格式不同,Webmail邮件还原技术一直是难点。通过对主要Webmail的内容格式分析,针对不同网站的Webmail建立相应的还原模块,实现对主要Webmail的内容还原。实验结果验证了该技术的有效性。     

The determination of the pore structural parameters of isoporous resins by inverse GPC

The swollen pore structure of a series of microporous isoporous resins (7.4–140 Å) are investigated with inverse GPC, n-alkylbenzenes and linear polystyrenes being used as probe molecules. The results indicated that, with the lowering of crosslinking degree of isoporous resins, the average pore diameter increased and the pore distribution curve broadened. All pore volume distribution obeyed a log-normal distribution. Based on the linear regression method, the experimental data were fitted to a monotonously declining exponential function and a normal distribution function by a computer, and some important structural parameters such as average pore diameter, pore volume distribution, specific surface area, etc. were obtained. The specific surface area of swollen gels were found much greater than those in the dry state measured by N₂ adsorption.     

电泵井振动监测及传输系统设计

潜油电泵机组是具有超细长转轴的复杂旋转机械,有复杂的生产及安装工艺,且采用了多级离心泵,在生产过程中会产生强大的振动源,测量并分析机组振动状况,是评估潜油电泵机组的运行状况、提高可靠性的重要手段。本文采用MMA3201振动加速度计监测振动状况,并采用4 mA²0 mA电流环将信号传输到井上MCU进行分析处理,根据监测和处理结果,适时提泵检修,采取合理的减振措施,延长潜油电泵的使用寿命。     

Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.