Enhanced mortar approach to characterize the effect of reclaimed asphalt pavement on virgin binder true grade

The asphalt community seeks a solvent-free method to determine the properties of RAP binder and those of its blends with virgin binders. A promising approach is to test mortars composed of fine fractions of RAP and a virgin binder, and to calculate grade change rate (GCR) to predict blended binder true grade at any binder replacement rate (BRR). However, the existing mortar approach underestimates the effect of RAP on binder grade, particularly at high temperatures. This study identified the use of a shift factor in the existing method as the source of underestimations. An alternative data analysis method was developed, which eliminates the shift factor by using the relationship between binder and mortar properties. Dynamic shear rheometer tests were conducted on a total of 12 mortar combinations, including 4 virgin binders and 3 RAP sources at a BRR of 15%, and then, RAP GCR values were determined by following both the existing and the alternative methods. Satisfactory comparisons were only observed between grades predicted with the alternative method and measured values of manual RAP binder blends: the average difference was lower than 1 °C for BRR of 15 and 30%, and < 4 °C for BRR of 100%. This not only validated the alternative method but also substantiated that RAP GCR is constant, i.e., the grade of RAP blends linearly increased with BRR. Further evaluation of the enhanced mortar approach is recommended at intermediate and low temperatures as well as with blends including recycled asphalt shingles.     

Surface integrity of Inconel 718 by hybrid selective laser melting and milling

ABSTRACT

While selective laser melting (SLM) offers design freedom of metal parts with much less material consumption, there exist several limitations, including high surface roughness, low-dimensional accuracy, and high tensile residual stresses. To make functional parts with high form accuracy and superior surface integrity, an as-SLM part needs finishing to remove the deposited surface material. The integration of machining and SLM creates a hybrid manufacturing route to overcome the inherited limitations of SLM. However, little study has been done to characterise surface integrity of an as-SLM part followed by machining (e.g. hybrid SLM-milling). In this paper, surface, integrity including surface roughness, microstructure, and microhardness, have been characterised for IN718 samples processed by the hybrid process. It has been found that microhardness varies with the scan direction and the use of coolant in the subsequent milling, and surface integrity can be significantly improved by the hybrid SLM-milling route.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions

Developing light weight polymer based composites dispersed with novel reinforcements which can function well in the presence of aggressive environments is an active research field in the materials engineering. Hence, in the current work, halloysite nanotubes (1 %, 2 %, 4 %, 6 %, 8 % and 10 % by weight) were reinforced into acrylonitrile butadiene styrene/polycarbonate blend and the role of reinforcing phases on the mechanical performance under aggressive environmental conditions has been evaluated. Hardness was measured as gradually increased in the composites with the increased content of the reinforcements. Impact strength of the composites was observed as increased in the composites up to 4 % reinforcement and further decreased. Increased strength was measured for the composite up to 2 % reinforcement. Ductility of the composites was decreased as reflected form the decreased % of elongation with the higher fraction of reinforcements due to induced brittleness. The composites were exposed to diluted sulfuric acid for 3 h and 6 h at 60 °C and then subjected to tensile loading. With the increased time of exposure, composites with 1 % and 2 % reinforcement exhibited relatively better performance.     

Modified Bagolini striated glass test: clinical applications of starlight test in binocular visual field screening

AIM: To introduce the "starlight" test which was devised to check binocular vision in normal conditions of seeing in a rapid, easy, and cost effective manner and to estimate the possibility of its clinical use in screening the binocular visual field of patients. METHOD: The Bagolini striated glass test consists of optically plano lenses with imperceptible parallel scratches that barely blur the environment but produce two perpendicular luminous stripes (right eye stripe of 45 degrees and left eye stripe of 135 degrees) when subjects with normal binocular vision view one light source. Unlike the original Bagolini test, the starlight test uses three light sources in horizontal or vertical lines according to the testing purposes and the subject is asked to fixate upon the centre light. Through Bagolini glasses, the subject observes the resulting grid-like pattern and the state of binocular visual field of the subject can be roughly estimated. RESULTS: Normal subjects and patients with strabismus, visual field loss from intracranial diseases, glaucoma, retinitis pigmentosa, and functional visual loss were examined using the starlight test and findings from each case were discussed. CONCLUSIONS: The starlight test, which was made by hand at a low cost, is a simple test that can be used clinically. It provides information about the state of binocular vision of patients in normal conditions of seeing. It is also useful because it enables the examiner to share similar experiences with the examinee. The results suggest it can be effective in visual field screening.     

Clinicopathological significance of intratubular giant macrophages in progressive glomerulonephritis

Very large macrophages, which we have termed "giant macrophages" (G-M phi), have been found in renal tubules, some containing cytoplasmic vacuoles. To elucidate their pathophysiological roles, we examined renal biopsy tissues from various primary glomerulonephritis (GN) and tubulointerstitial nephritis (TIN) using immunohistochemistry with monoclonal antibodies against M phi and other cell surface markers. Giant macrophages were absent or rare in TIN, minimal change nephrotic syndrome, and minor glomerular abnormalities, but G-M phi was plentiful in progressive glomerulonephrides such as IgA nephropathy with crescents, membranoproliferative GN, focal segmental glomerulosclerosis, and especially in crescentic GN. These G-M phi were usually seen in the lumen of renal tubules, but occasionally were found in the Bowman's spaces and glomerular tufts, and similar cells were also found in urine. Moreover, they frequently made contact with tubular epithelial cells expressing intercellular adhesion molecule-1, and the tubular epithelial cells in such lesions often had degenerative changes. Giant M phi may damage tubular epithelial cells from the luminal side. Phenotypically, G-M phi showed activated (CD71+) and mature (25F9+) characteristics along with features of M phi (CD68+), and the cytoplasm contained a great deal of lipids. The numbers of G-M phi in renal tissues closely correlated with the degree of hematuria (rho = 0.5, P < 0.001), serum creatinine value (r = 0.63, P < 0.001) in GN patients (N = 96) and with proteinuria in IgA nephropathy patients (r = 0.89, P < 0.001, N = 27). These data suggest that G-M phi are M phi that were activated and matured in certain active inflammatory sites, which flowed into tubules and then into urine. Thus, the existence of G-M phi in biopsy tissue or urine reflect the activity of GN and may have a predictive value for the progression of GN.     

The effects of qi-gong and acupuncture on human cerebral evoked potentials and electroencephalogram

Although a number of studies on traditional Chinese medicine, such as qi-gong (QG), acupuncture (AC), moxibustion and Chinese herbal drugs, have been reported in recent years, there are few reports on human cerebral evoked potentials (EPs), especially relating only to QG and AC. In the present study, we examined the changes in EPs and electroencephalogram (EEG) by QG, and by AC stimulation to the point called "Zusanli" on the left lower leg, with one healthy male adult. 1. With regard to the effect of QG, significant changes in EP-components originated from the cortex suggest both facilitating and inhibitory effects of QG on the cortex. However, no significant changes in EP-components originated from the subcortex and no significant changes in EEG power% suggest that QG does not affect the subcortex. 2. With regard to the effects of AC, significant changes in EP-components originated from the cortex suggest facilitating and inhibitory effects of AC stimulation on the cortex. Furthermore, it is suggested that AC stimulation has few effects on the somatosensory and the visual pathways up to the cortex, while it has complicated effects on the auditory pathway up to the cortex.     

Escherichia coli prlC gene encodes a trypsin-like proteinase regulating the cell cycle

BACKGROUND AND PURPOSE: Mood disorders are common after stroke and may impede physical, functional, and cognitive recovery, making early identification and treatment of potential importance. We aimed to compare the accuracy of the General Health Questionnaire (GHQ-30) and the Hospital Anxiety and Depression (HAD) Scale in detecting psychiatric morbidity after stroke and to determine the most suitable cutoff points for different purposes. METHODS: One hundred five hospital-referred stroke patients completed both the GHQ-30 and HAD Scale 6 months after onset before a blinded psychiatric assessment in which the Schedule for Affective Disorders and Schizophrenia with some supplementary questions was used to determine a DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) diagnosis. Measures were compared in terms of sensitivity, specificity, and receiver operating characteristic curves. RESULTS: No significant differences were found between the GHQ-30 and the HAD Scale in identifying those patients with any DSM-IV diagnosis (P=0.95), grouped depression (P=0.56), or anxiety (P=0.25) disorders. The previously recommended cutoff points for identifying "cases" for the GHQ (4/5) and for the HAD Scale (8/9 and 11/12) were found to be suboptimal in this population. CONCLUSIONS: The GHQ-30 and HAD scale exhibited similar levels of sensitivity and specificity. Data are presented, taking into account the "cost" of false-positives and negatives, to allow a choice of cutoff points suitable for differing situations.     

Quantitative analysis of metabolic gases by multichannel Raman spectroscopy: use of a newly designed elliptic-spherical integration type of cell holder

We describe the quantitative analysis of some metabolic gases bymultichannel Raman spectroscopy. Raman spectra were measured forair, acetone, ammonia, carbon dioxide, and mixed gas consisting ofacetone, ammonia, and air. We designed a new elliptic-sphericalintegration type of cell holder to obtain the Raman spectra of gaseswith a high signal-to-noise ratio. Concentrations of acetone, ammonia, and carbon dioxide were determined by the peak intensities ofRaman bands at 2940, 3228, and 1385 cm(-1), respectively. To compensate for the fluctuations of Ramanintensities caused by several factors, such as the fluctuations oflaser power, the peak intensity of a band at 2324 cm(-1) dueto nitrogen gas was used as an internal intensity standard. Thecorrelation coefficient between the corrected Raman intensity at 2940cm(-1) and the concentration of acetone was calculated to be0.984 for a concentration range of 2-12 ppm. The detection limitof acetone gas was found to be 2 ppm.