Induction motors airgap-eccentricity detection through the discrete wavelet transform of the apparent power signal under non-stationary operating conditions

Fast Fourier transform (FFT) analysis has been successfully used for fault diagnosis in induction machines. However, this method does not always provide good results for the cases of load torque, speed and voltages variation, leading to a variation of the motor-slip and the consequent FFT problems that appear due to the non-stationary nature of the involved signals. In this paper, the discrete wavelet transform (DWT) of the apparent-power signal for the airgap-eccentricity fault detection in three-phase induction motors is presented in order to overcome the above FFT problems. The proposed method is based on the decomposition of the apparent-power signal from which wavelet approximation and detail coefficients are extracted. The energy evaluation of a known bandwidth permits to define a fault severity factor (FSF). Simulation as well as experimental results are provided to illustrate the effectiveness and accuracy of the proposed method presented even for the case of load torque variations.     

Nutritional components and anti-oxidant capacity of ten cultivars and lines of cactus pear fruit (Opuntia spp.)

Cactus pear fruit (Opuntia) are harvested from various species of the genus Opuntia of the cactus family (Cactaceae), and are produced and consumed in several countries. We have characterized the nutritional content and antioxidant capacity (AC) of the fruit of ten cultivars/lines of distinct pulp colors. ‘Camuesa’ had the highest betalains, total carotenoids, ß-carotene, ascorbic acid, and was one of the highest in total phenolic compounds, but its AC did not demonstrate outstanding differences with some other cultivars/lines that were not as rich in these compounds. ‘Roja Pelota’ had high AC when measured with the DPPH assay, but had low total carotenoids, ß-carotene and total phenolic content. ‘Reyna’ had slightly low AC as measured by the FRAP assay, practically no betalains, and low vitamin C, tocopherols, ß-carotene, and total phenolic content.     

Rosavin Ameliorates Hepatic Inflammation and Fibrosis in the NASH Rat Model via Targeting Hepatic Cell Death

Background: Non-alcoholic fatty liver disease (NAFLD) represents the most common form of chronic liver disease that urgently needs effective therapy. Rosavin, a major constituent of the Rhodiola Rosea plant of the family Crassulaceae, is believed to exhibit multiple pharmacological effects on diverse diseases. However, its effect on non-alcoholic steatohepatitis (NASH), the progressive form of NAFLD, and the underlying mechanisms are not fully illustrated. Aim: Investigate the pharmacological activity and potential mechanism of rosavin treatment on NASH management via targeting hepatic cell death-related (HSPD1/TNF/MMP14/ITGB1) mRNAs and their upstream noncoding RNA regulators (miRNA-6881-5P and lnc-SPARCL1-1:2) in NASH rats. Results: High sucrose high fat (HSHF) diet-induced NASH rats were treated with different concentrations of rosavin (10, 20, and 30 mg/kg/day) for the last four weeks of dietary manipulation. The data revealed that rosavin had the ability to modulate the expression of the hepatic cell death-related RNA panel through the upregulation of both (HSPD1/TNF/MMP14/ITGB1) mRNAs and their epigenetic regulators (miRNA-6881-5P and lnc-SPARCL1-1:2). Moreover, rosavin ameliorated the deterioration in both liver functions and lipid profile, and thereby improved the hepatic inflammation, fibrosis, and apoptosis, as evidenced by the decreased protein levels of IL6, TNF-α, and caspase-3 in liver sections of treated animals compared to the untreated NASH rats. Conclusion: Rosavin has demonstrated a potential ability to attenuate disease progression and inhibit hepatic cell death in the NASH animal model. The produced effect was correlated with upregulation of the hepatic cell death-related (HSPD1, TNF, MMP14, and ITGB1) mRNAs—(miRNA-6881-5P—(lnc-SPARCL1-1:2) RNA panel.     

Collagen structure in human anterior cruciate ligament and patellar tendon

Human anterior cruciate ligaments (ACL) and patellar tendons (PT) were examined using scanning and transmission electron microscope to determine collagen architecture and morphology. Morphometric measurements were performed using an image analyser. Similarities and differences were found between the ACL and the PT. In both tissues, the anterior band is more collagenous than the posterior band giving rise to a material heterogeneity. In addition, a considerable variation in the collagen fascicle cross-sectional area was found. There was no significant difference between the ACL and PT fibre diameters, except for the elderly subjects.The collagen wave pattern was found to be helical in the PT while in the ACL it may be helical as well as planar. In addition, the waviness period was significantly larger in the PT than in the ACL. Finally, transverse fibrils, the nature of which is unknown, were found only in the ACL.     

Flow cytometric analysis of macrophage response to ceramic and polyethylene particles: effects of size, concentration, and composition

The aim of this work was to study the effect of a dose of 150 microCi 131I on the barrier properties of the thyroid epithelium in pregnant female rats. Thirty-five female Wistar rats were divided into a control and four experimental groups (each distinguished by the time of 131I injection: group I--no less then 12 days before mating; groups II, III, and IV--on 5th, 10th, and 16th days of gestation, respectively). The thyroid glands were fixed in Bouin's fluid, embedded in paraffin, and stained immunohistochemically for thyroglobulin and fibronectin. In group IV the appearance of follicles with fibronectin-positive colloid demonstrates the penetration of blood plasma into the follicular lumen. There are more fibronectin positive follicles in group III. Regardless of the nature of the follicles' contents, numerous thyrocytes with an intensive fibronectin positive reaction begin to appear in the follicles. In group II the number of fibronectin positive follicles and thyrocytes is clearly reduced, and in group I only a few remain. In group IV there is a noticeable reduction in the quantity of colloid inside the follicles and often an absence of any thyroglobulin positive reaction. There are thyrocytes in which thyroglobulin positive granules localized in the basal zone. There is thyroglobulin positive staining in the stroma and blood vessels. In group II thyroglobulin is no longer found in the stroma. Small doses of 131I provoke a serious breakdown in the thyroid epithelium's barrier properties, although these changes are of a transient nature. The central zone of the thyroid gland reacts more actively and dynamically to exposure to radioactive iodine than the peripheral zone.     

Performance of CF/PA12 composite femoral stems

This study presents the microstructural and mechanical behavior of the CF/PA12 composite material developed as well as its biomechanical performance when used for the fabrication of femoral stems. The static tests were performed to evaluate the compressive and flexural modulus as well as the ultimate compressive and bending strength. It was found that CF/PA12 composite had bone-matching properties in the same order of magnitude as cortical bone in the femur. Density and void content measurements were also done to assess the consolidation quality. Dynamic fatigue testing was conducted on both CF/PA12 cylinders and femoral stems to evaluate the long term durability and mechanical reliability of the composite. Compression–compression cyclic loading was used at a frequency of 6 Hz with loads varying between 17 kN and 22 kN for the composite cylinders while a frequency of 10 Hz and load of 2300 N was employed for the femoral stems. Results indicate that the fatigue performance of CF/PA12 composite surpasses by far the required fatigue performance for total hip prosthesis (THP) stems. The overall performance of the CF/PA12 femoral stems confirms that this composite is an excellent candidate material for orthopedic applications such as THP stems.     

Spectroscopic ellipsometry and magneto-transport investigations of Mn-doped ZnO nanocrystalline films deposited by a non-vacuum sol–gel spin-coating method

Nanocrystalline Zn_1?xMn_xO films (x = 0, 0.05, 0.1, 0.15, and 0.2) were deposited onto corning glass substrates by a non-vacuum sol–gel spin coating method. All of the films were annealed at 450 °C for 2 h. The structural, optical and magneto-transport properties were investigated by X-ray diffraction, spectroscopic ellipsometry and a system for the measurement of the physical properties. X-ray diffraction analysis of the films reveals that the Mn-doped ZnO films crystallize in the form of a hexagonal wurtzite-type structure with a crystallite size decreases with an increase of the Mn concentration. It was also found that the microstrain increases with the increase of the Mn content. Evidence of nanocrystalline nature of the films was observed from the investigation of surface morphology using transmission, scanning electron microscopy and atomic force microscopy. The optical constants and film thicknesses of nanocrystalline Zn_1?xMn_xO films were obtained by fitting the spectroscopic ellipsometric data (ψ and Δ) using a three-layer model system in the wavelength range from 300 to 1200 nm. The refractive index was observed to increase with increasing Mn concentration. This increase in the refractive index with increasing Mn content may be attributed to the increase in the polarizability due to the large ionic radius of Mn²⁺ compared to the ionic radius of Zn²⁺. The optical band gap of the nanocrystalline Mn–ZnO films was determined by an analysis of the absorption coefficient. The direct transition of the series of films was observed to have energies increasing linearly from 3.17 eV (x = 0) to 3.55 eV (x = 0.2). Magnetoresistance (MR) was measured from 5 K to 300 K in a magnetic field of up to 6 T. Low-field positive MR and high-field negative MR were detected in Mn-doped ZnO at 5 K. Only negative MR was observed for temperatures above 200 K. The positive MR in Mn-doped ZnO films was observed to decrease drastically when the temperature increased from 5 K to 100 K. The isothermal MR of Zn_1?xMn_xO films with different Mn concentrations at 5 K reveals that the increase of the Mn content induces a giant positive MR above x = 0.05 and reaches up to 55% at an applied field of 30 kOe for x = 0.2.     

A Practical Chemo-enzymatic Approach to Highly Enantio-Enriched 10-Ethyl-7,8-dihydro-γ-ionone Isomers: A Method for the Synthesis of 4,5-Didehydro-α-Ionone

An efficient and convenient strategy for the enantioselective synthesis of enantiomerically enriched 10-ethyl-7,8-dihydro-γ-ionone isomers (R)-(+)-7, and (S)-(-)-7 are described utilizing a lipase mediated resolution protocol, and reductive elimination of the secondary allylic alcohol as the key step. The enantioselective and diastereoselective lipase kinetic acetylation of 4-hydroxy-γ-ionone derivatives 6a afforded the 4-acetyl-γ-ionone derivatives (-)-8, and the 4-hydrox-γ-ionone derivatives (+)-6a, which are suitable precursors of the desired products. Stereospecific palladium-mediated elimination of allylic acetate provides the target compounds with an excellent enantiomeric excess and yield. Additionally, the novel 4,5-didehydro-α-ionone 13 is obtained from readily prepared (2,6,6-trimethylcyclohexa-2,4-dien-1-yl) methanol 9. The structures of all newly synthesized compounds have been elucidated by (1)H, (13)C NMR, GC-MS, and IR spectrometry. These compounds represent a new class of odorants that may be of pivotal relevance in industrial perfumery.     

Structure and catalytic properties of Ni/MWCNTs and Ni/AC catalysts for hydrogen production via ammonia decomposition

The structure and catalytic properties of nickel catalysts supported on multi-wall carbon nanotubes (MWCNTs) and on three different types of activated carbon (AC) were studied. The surface areas of AC carriers were defining the size of supported nickel particles. Large surface area of AC led to small Ni nanoparticles and high Ni dispersion. Turnover frequency (TOF_NH3) of ammonia decomposition decreased with decreasing of Ni particle size. The highest degree of ammonia conversion was observed on Ni/AC prepared by using of AC support with largest surface area. The catalytic activity of Ni/MWCNTs was much higher than catalytic activity of the studied Ni/AC catalysts. The synergic nickel-support interaction and special electronic conductivity properties of MWCNTs were responsible for high catalytic activity of Ni/MWCNTs catalyst.