Solar absorber coatings based on CoCuMnOx spinels prepared via the sol–gel process: structural and optical properties

Titanium-doped and undoped CuCoMnO_x spinel films were deposited on Al substrates from sols which were made from the following: Co-acetate, Cu-chloride and Mn-acetate (Ti:CoCuMnO_x-I); and Co-acetate, Cu-nitrate and Mn-acetate (CoCuMnO_x-II). The precursors’ ratio Co:Cu:Mn was equal to 1:3:3. The solar absorptance (α_s) and the thermal emittance (_T) of the films, which were annealed at 450°C for 15 or 30 min, were determined from the corresponding diffuse reflectance spectra in the 0.32–20 μm range. The results show that the CoCuMnO_x-II films with SiO_x protective over-coatings exhibited values of α_s=0.85–0.91 and _T below 0.036 after just a single dipping/annealing cycle.The structure of the films was studied with X-ray diffraction (XRD), infrared (IR) absorbance and near-grazing incidence angle (NGIA) reflection-absorption spectroscopy. Our results suggested that the films have a spinel structure with the composition CoCuMnO_x. The stability of the films was tested by soaking them in boiling water for 2 h. NGIA IR spectra of the treated films confirmed the formation of the hydrated mixed oxide (Mn-, Co-, Cu-) phases. To improve the stability of the films two kinds of protective over-coatings were tested: one over-coating was based on polysiloxane resin and the other on high-density silica (T-resin). Films that were resistant to boiling water were obtained by applying the high-density silica protective over-coating, which was cured at 140°C for 30 min.     

Quality Map Thresholding for De-noising of Complex-Valued fMRI Data and Its Application to ICA of fMRI

Although functional magnetic resonance imaging (fMRI) data are acquired as complex-valued images, traditionally most fMRI studies only use the magnitude of the data. FMRI analysis in the complex domain promises to provide more statistically significant information; however, the noisy nature of the phase poses a challenge for successful study of fMRI by complex-valued signal processing algorithms. In this paper, we introduce a physiologically motivated de-noising method that uses phase quality maps to successfully identify and eliminate noisy areas in the fMRI data so they can be used in individual and group studies. Additionally, we show how the developed de-noising method improves the results of complex-valued independent component analysis of fMRI data, a very successful tool for blind source separation of biomedical data.     

Al surface morphology effect on flip-chip solder bump shear strength

This paper reports the result of a study on the effect of aluminum pad surface morphology on the flip-chip solder bump reliability. The influence of the Al surface morphology on the electroless zinc/nickel/gold UBM is presented. The reliability of the solder bump as measured by ball shear force is reported. Al pad were produced using two RF sputtering systems: CVC-601 and Varian-3180. The Al targets used in CVC and Varian system were 99%Al–1%Si and 98.95%Al–1%Si–0.05%Ti respectively. The surface of the CVC sputtered Al samples were smooth while the surface of the Varian sputtered Al samples were rough. All the samples were subjected to the electroless zinc/nickel/gold plating. The results suggest that after plating, the smooth Al surface resulted in a fine nickel UBM surface while the rough Al surface formed a coarse nickel UBM surface. Ball shear test was conducted after the solder balls were bumped on the UBM. Result shows that the fine UBM surface samples have twice the shear strength compared to the samples with coarse UBM surface samples. The analysis of the results indicates that shear surface occurred at the UBM and the solder interface for samples with rough UBM surface leading to the lower shear strength. Nickel bump shear test result shows that pretreatment of Al pad surface by sodium hydroxide and nitric acid created more zinc seeds this led to better electroless nickel plating. Nickel bump shear tests also shows that double zincated bumps had higher shear strength than single zincated bumps. To obtain reliable flip-chip solder bumps, it is essential to maintain good Al pad surface morphology, pretreatment of the Al pad and undergo second zincation.     

Identification of ligands for olfactory receptors by functional expression of a receptor library

The recognition of odorants by olfactory receptors represents the first stage in odor discrimination. Here, we report the generation of an expression library containing a large and diverse repertoire of mouse olfactory receptor sequences in the transmembrane II-VII region. From this library, 80 chimeric receptors were tested against 26 odorants after transfection into HEK-293 cells. Three receptors were identified to respond to micromolecular concentrations of carvone, (-) citronellal, and limonene, respectively. We also found that the mouse I7 receptor, unlike the rat I7 receptor, prefers heptanal instead of octanal, as a result of a single valine-to-isoleucine substitution. This finding represents the beginning of a molecular understanding of odorant recognition. The identification, on a large scale, of cognate receptor-odorant interactions should provide insight into olfactory coding mechanisms.     

A method for the design of MRI radiofrequency coils based on triangular and pulse basis functions.

This paper presents a numerical technique for the design of an RF coil for asymmetric magnetic resonance imaging (MRI) systems. The formulation is based on an inverse approach where the cylindrical surface currents are expressed in terms of a combination of sub-domain basis functions: triangular and pulse functions. With the homogeneous transverse magnetic field specified in a spherical region, a functional method is applied to obtain the unknown current coefficients. The current distribution is then transformed to a conductor pattern by use of a stream function technique. Preliminary MR images acquired using a prototype RF coil are presented and validate the design method.     

The chlamydial EUO gene encodes a histone H1-specific protease

Chlamydia trachomatis is an obligate intracellular pathogen, long recognized as an agent of blinding eye disease and more recently as a common sexually transmitted infection. Recently, two eukaryotic histone H1-like proteins, designated Hc1 and Hc2, have been identified in Chlamydia. Expression of Hc1 in recombinant Escherichia coli produces chromatin condensation similar to nucleoid condensation observed late in the parasite's own life cycle. In contrast, chromatin decondensation, observed during the early life cycle, accompanies down-regulation and nondetection of Hc1 and Hc2 among internalized organisms. We reasoned that the early upstream open reading frame (EUO) gene product might play a role in Hc1 degradation and nucleoid decondensation since it is expressed very early in the chlamydial life cycle. To explore this possibility, we fused the EUO coding region between amino acids 4 and 177 from C. trachomatis serovar Lz with glutathione S-transferase (GST) and examined the effects of fusion protein on Hc1 in vitro. The purified fusion protein was able to digest Hc1 completely within 1 h at 37 degrees C. However, GST alone exhibited no Hc1-specific proteolytic activity. The chlamydial EUO-GST gene product also cleaves very-lysine-rich calf thymus histone H1 and chicken erythrocyte histone H5 but displays no measurable activity towards core histones H2A, H2B, H3, and H4 or chlamydial RNA polymerase alpha-subunit. This proteolytic activity appears sensitive to the serine protease inhibitor 4-(2-aminoethyl)-benzenesulfonyl fluoride hydrochloride (AEBSF) and aspartic protease inhibitor pepstatin but resistant to high temperature and other broad-spectrum protease inhibitors. The proteolytic activity specified by the EUO-GST fusion product selectively digested the C-terminal portion of chlamydial Hc1, the domain involved in DNA binding, while leaving the N terminus intact. At a molar equivalent ratio of 1:1 between Hc1 and DNA, the EUO gene product cleaves Hc1 complexed to DNA and this cleavage appears sufficient to initiate dissociation of DNA-Hc1 complexes. However, at a higher molar equivalent ratio of Hc1/DNA (10:1), there is partial protection conferred upon Hc1 to an extent that prevents dissociation of DNA-Hc1 complexes.     

Finite-dimensional filters with nonlinear drift,VI: Linear structure of Ω

Ever since the concept of estimation algebra was first introduced by Brockett and Mitter independently, it has been playing a crucial role in the investigation of finite-dimensional nonlinear filters. Researchers have classified all finite-dimensional estimation algebras of maximal rank with state space less than or equal to three. In this paper we study the structure of quadratic forms in a finite-dimensional estimation algebra. In particular, we prove that if the estimation algebra is finite dimensional and of maximal rank, then the Ω=(∂f _j /∂x _i −∂f _i /∂x _j )matrix, wheref denotes the drift term, is a linear matrix in the sense that all the entries in Ω are degree one polynomials. This theorem plays a fundamental role in the classification of finite-dimensional estimation algebra of maximal rank. This research was supported by Army Research Office Grants DAAH 04-93-0006 and DAAH 04-1-0530.