Structural analysis of assemblages of thin-walled members

A matrix method for the analysis of structural systems composed of thin-walled members is presented. The matrix displacement analysis includes the effects of thin-walled non-uniform torsion theory, cross-section asymmetry, eccentric restraint as well as joint types peculiar to thin-walled members. The method is used for a prediction of the elastic behaviour of a set of representative test frames. The test frames were pitched-roof portals constructed from channel sections bent about their major-axis and supported by eccentric restraints simulating purlins and girts.     

Study on two operating conditions of a full-scale oxidation ditch for optimization of energy consumption and effluent quality by using CFD model

The operating condition of an oxidation ditch (OD) has significant impact on energy consumption and effluent quality of wastewater treatment plants (WWTPs). An experimentally validated numerical tool, based on computational fluid dynamics (CFD) model, was proposed to optimize the operating condition by considering two important factors: flow field and dissolved oxygen (DO) concentration profiles. The model is capable of predicting flow pattern and oxygen mass transfer characteristics in ODs equipped with surface aerators and submerged impellers. Performance demonstration and comparison of two operating conditions (existing and improved) were carried out in two full-scale Carrousel ODs at the Ping Dingshan WWTP in Henan, China. A moving wall model and a fan model were designed to simulate surface aerators and submerged impellers, respectively. Oxygen mass transfer in the ditch was predicted by using a unit analysis method. In aeration zones, the mass inlets representing the surface aerators were set as one source of DO. In the whole straight channel, the oxygen consumption was modeled by using modified BOD-DO model. The following results were obtained: (1) the CFD model characterized flow pattern and DO concentration profiles in the full-scale OD. The predicted flow field values were within 1.98 ± 4.28% difference from the actual measured values while the predicted DO concentration values were within −4.71 ± 4.15% of the measured ones, (2) a surface aerator should be relocated to around 15 m from the curve bend entrance to reduce energy loss caused by fierce collisions at the wall of the curve bend, and (3) DO concentration gradients in the OD under the improved operating condition were more favorable for occurrence of simultaneous nitrification and denitrification (SND).     

Sensory evaluation of drinking water by consumer panels

The human senses play an important role in assessing the quality of food and of the environment. Particularly the chemical senses of taste and smell determine the pleasantness of foods and drinks and may provide a warning mechanism for the presence of more or less toxic contaminants. Even after the recent rapid development of powerful analytical techniques the human nose can easily detect trace amounts of chemicals at levels manytimes lower than the analytical detection limits.Although taste and odour assessment of drinking water has been practized inmany waterworks laboratories by small panels, relatively unreliable results were obtained and such sensory data played up till now only a minor role in the management of the water treatment plant. More sophisticated and reliable methods for sensory water quality evaluation are discussed. Special attention is given to the characteristics of the human senses of taste and smell, to which the methodology of sensory assessment should be better adapted. High numbers of observations on a sample are generally needed, for which purpose the use of large panels has to be realized. In this respect the help of large consumer panels is an alternative for the presently often used small laboratory groups. As an example the preliminary results of a large ongoing experiment of sensory water quality assessment by 2 consumer panels of 100 persons each in the Rotterdam area are discussed. Drinking water quality is judged at the consumer homes every week. The experiment started September 1979 and will be continued for one year.     

The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Contamination bacterienne d'une zone balneaire liee a sa frequentation

The bacterial contamination from bathers in the water and sand at a beach was investigated. Measurements were made of the composition of the cutaneous bacterial flora released by two bathers as well as the sensitivity of the main contaminants to solar radiation. The variations in bacterial concentration of the sea water and sand were determined at the sea shore over three complete day cycles. Broadly speaking, the concentration of some bacteria increases with the frequency with which the beach is used. Nevertheless, short-period variations seem to be masked by the opposing effects of solar radiation and bathers.     

Feasibility analysis of mixed-income housing in China

In this paper, it is demonstrated that mixed-income housing is a feasible and beneficial pattern nowadays. This pattern is propitious for good living and harmonious development of society. Based on practice, data are gathered from the field, and the social investment and social distance analysis of the social network theory are used from the perspective of cross-disciplinary fields. The hypothesis is tested and the feasible and beneficial characteristics of mixed-income housing are pointed out. __________ Translated from Architecture Journal, 2006, 4: 36–39 [译自: 建筑学报]     

重读《屋盖卷材防水设计措施(试行草案)》有感

根据1964年原建筑工程部颁发的《屋盖卷材防水设计措施(试行草案)》,从屋面工程技术规范的演变过程中,对若干重大技术问题进行分析对比。指出要“以史为鉴”,不断总结和修改规范中的不足之处,以保证屋面工程质量并维护国家规范的严肃性。     

Effects of adding organic materials to an acid sulfate soil on the growth of cocoa (Theobroma cacao L.) seedlings

Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.