Diffusion and influence of Cu on properties of CdTe thin films and CdTe/CdS cells

The effective diffusion coefficients of Cu for thermal and photodiffusion in the CdTe films have been estimated from resistivity versus duration of thermal or photoannealing curves. In the temperature range 60–200°C the effective coefficient of thermal diffusion (D_t) and photodiffusion (D_ph) are described as D_t=7.3×10⁻⁷exp(−0.33/kT) and D_ph=4.7×10⁻⁸exp(−0.20/kT).It is found that the diffusion doping of CdTe thin films by Cu at 400°C results in a sharp decrease of resistivity up to 7 orders of magnitude of p-type material, depending on thickness of Cu film. The comparative study of performance of CdTe(Cu)/CdS and CdTe/CdS cells has been studied. It is shown that the diffusion doping of CdTe film by Cu increases efficiency of CdTe(Cu)/CdS cells from 0.9% to 6.8%. The degradation of photovoltaic parameters of CdTe(Cu)/CdS cell, during testing under forward and reverse bias at room temperature, proceeds at a larger rate than those of CdTe/CdS cell without Cu. The degradation of performance of CdTe(Cu)/CdS cells is tentatively assigned to electrodiffusion of Cu in CdTe, resulting in redistribution of concentration of Cu-related centers in CdTe film and heterojunction region.     

Concomitant Crystallization of Copper(II) Sachharinato Complexes with 2-methylpyrazine as a Monomer and an One-dimensional Polymer: Syntheses,Crystal Structures,Spectroscopic and Thermal Properties

The reaction of [Cu(sac)₂(H₂O)₄] · 2H₂O with 2-methylpyrazine (mpyz) leads two complexes, concomitant crystallization of a mononuclear complex [Cu(sac)₂(mpyz)(H₂O)₂] (1) and a polymeric complex [Cu(sac)₂(μ-mpyz)]_n (2). Both complexes have been characterized by elemental analyses, magnetic measurements, FT-IR and ESR, TG-DTA and single-crystal X-ray diffraction analyses. Single-crystal X-ray analyses show that complex 1 consists of discrete molecules in which the copper(II) ions exhibits a square-pyramidal coordination geometry. The individual molecules of 1 are connected into a hydrogen-bonded chain structure, which is further assembled to form a three-dimensional network by π–π stacking interactions. Complex 2 is an 1D coordination polymer in which copper(II) centers are bridged by the mpyz ligand. The chains are further assembled to form two-dimensional frameworks by π–π and C–H···π stacking interactions.     

Corrosion inhibition of steel in concrete by carboxylic acids

Water soluble carboxylic acids have been used as corrosion inhibitors. They remain largely soluble after curing in cement for up to 90d. Corrosion current measurements are presented showing malonic acid, a dicarboxylic acid, to be a very effective corrosion inhibitor even in the presence of 2.5 wt % chloride. Unfortunately, it has an initial retarding effect on the set of Portland cement. The investigation suggests that corrosion inhibitors based on carboxylic acids remain a fruitful field of investigation.     

Fabrication of co-PVDF/modacrylic/SiO2 nanofibrous membrane: Composite separator for safe and high performance lithium-ion batteries

Highly porous free-standing co-poly(vinylidene fluoride)/modacrylic/SiO₂ nanofibrous membrane was developed using electrically-assisted solution blow spinning method. The performance and the potential of the membrane as a lithium-ion battery separator were investigated. The addition of modacrylic enhanced the solution spinnability that resulted in defect-free membranes. Moreover, the presence of modacrylic enhanced the dimensional and thermal stabilities, while the addition of hydrophilic SiO₂ nanoparticle enhanced both mechanical property and ionic conductivity. Combustion test results illustrated that the presence of modacrylic provide flame retarding property over a set of different polymeric-based membranes. Electrochemical performance results showed that the developed membrane can increase the battery capacity compared with the commercial separator.     

Exploring the Belief Systems of Software Development Professionals

It is commonly accepted that an individual's beliefs and actions are based on his or her assessment and perceptions of the world. In order to determine what practices an individual is likely to follow at any given time, it is necessary to understand the individual's behavioral intention in a given circumstance. From an Information Technology perspective, a software development professional's belief systems are potentially the basis for the adoption and implementation of new and innovative work practices and processes. In this article, we explore the belief systems of software development professionals in order to understand the beliefs underlying intention and practice, and we seek answers about how they adopt or reject new and innovative software development processes and practices. The results point out a strong influence of past experiences, personality types, and repeated behavior on current software development processes and practices in industrial settings.     

Vegetation water content during SMEX04 from ground data and Landsat 5 Thematic Mapper imagery

Vegetation water content is an important parameter for retrieval of soil moisture from microwave data and for other remote sensing applications. Because liquid water absorbs in the shortwave infrared, the normalized difference infrared index (NDII), calculated from Landsat 5 Thematic Mapper band 4 (0.76-0.90 μm wavelength) and band 5 (1.55-1.65 μm wavelength), can be used to determine canopy equivalent water thickness (EWT), which is defined as the water volume per leaf area times the leaf area index (LAI). Alternatively, average canopy EWT can be determined using a landcover classification, because different vegetation types have different average LAI at the peak of the growing season. The primary contribution of this study for the Soil Moisture Experiment 2004 was to sample vegetation for the Arizona and Sonora study areas. Vegetation was sampled to achieve a range of canopy EWT; LAI was measured using a plant canopy analyzer and digital hemispherical (fisheye) photographs. NDII was linearly related to measured canopy EWT with an R² of 0.601. Landcover of the Arizona, USA, and Sonora, Mexico, study areas were classified with an overall accuracy of 70% using a rule-based decision tree using three dates of Landsat 5 Thematic Mapper imagery and digital elevation data. There was a large range of NDII per landcover class at the peak of the growing season, indicating that canopy EWT should be estimated directly using NDII or other shortwave-infrared vegetation indices. However, landcover classifications will still be necessary to obtain total vegetation water content from canopy EWT and other data, because considerable liquid water is contained in the non-foliar components of vegetation.     

An approach to the calculation of multilayer magnetic shielding using artificial neural network

The electromagnetic interference has many undesired effects to the office equipments and the performance of technological devices. Therefore, electrical devices should have field protection mechanism against magnetic fields. The shielding mechanism prevents external magnetic field emitted from the device to the vicinity area. This work attempts to apply artificial neural network in order to estimate shielded magnetic field for multilayer shielding application. The multilayer magnetic shielding performances of cylindrical shaped ferromagnetic shields under extremely low frequency are investigated. For this purpose, three different ferromagnetic materials in cylindrical shape are chosen for magnetic shielding. The shielding performances of these materials are measured and a selected set of data is used to train and test an artificial neural network. The proposed neural network model achieves an intelligent decision for the shielded magnetic field level based on distance, unshielded magnetic field value, number of shield layer and skin-depth of the shield.     

Effect of CR and FT-paraffin versus SBS modification in terms of conventional and rheological properties

In this study, the rheological and conventional properties of binders prepared with crumb rubber (CR) and FT-paraffin were compared to styrene-butadiene-styrene (SBS)-modified binders’ properties. The objective of this study was to determine which modified binders in different combinations of the CR and the FT-paraffin exhibited better performance than the SBS-modified binders, in terms of conventional and rheological properties. Results showed that the additives exhibited different performances for different types of tests. Many of the combinations including the common usage of the CR and the FT-paraffin performed better at high temperature than the SBS modification. Overall, the test results show that the binders prepared by 6% CR with 3 and 4% FT-paraffin and those prepared with 8% CR with 3% FT-paraffin were better binders than the 4% SBS-modified binder, in terms of low and high temperature properties.     

Stability under vacuum of silicon trap detectors and their use as transfer instruments in cryogenic radiometry

The stability of the responsivity of trap detectors under vacuum has been studied by means of a special chamber designed for the test of photodetectors at low pressure. The first experiments at a wavelength of 647 nm show that the responsivity variations are smaller than the uncertainties of the measurements, approximately 3 parts in 10(5), when the detector operates successively in air, under vacuum, and then again in air. Calculations based on experiments with single windowless photodiodes indicate that the change in trap responsivity that is due to vacuum effects should be smaller than 1 part in 10(5), at least in the visible part of the wavelength range. This stability makes trap detectors suitable for cryogenic radiometry when one uses transfer detectors under vacuum.