Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size

Being crystalline materials, brittleness may be an important issue for granitic rocks, especially when they are subject to certain loading conditions. Therefore, in practice, more specifically in their usage as a natural building stone, there is a need for their brittleness characterization. This paper reports a study carried out on some selected granitic rock types in order to determine their relative brittleness index values and relate it to their mineral grain size. For this purpose, three different types of granitic rocks similar in mineral composition, but diverse in grain sizes were selected for the execution of the study. The relative brittleness index values of the studied rock types were determined from the size effect method by using the point load test apparatus. Based on the results of this investigation it is was concluded that, rather than the proportions of the rock forming minerals such as quartz and feldspars, the grain size of feldspars could be the dominant parameter affecting relative brittleness values of the tested rocks.     

Effect of curing under pressure on compressive strength development of cemented paste backfill

The mechanical performance of cemented paste backfill (CPB) placed in underground openings (e.g., mine stopes) often differs from laboratory-predicted performance, even under the same atmospheric curing conditions (ambient temperature and relative humidity). This is probably due to the specific self-weight consolidation, different drainage conditions and confinement pressures encountered in the paste backfilled stopes. A new test system named CUAPS (Curing Under Applied Pressure System) was designed at the Université du Québec en Abitibi-Témiscamingue (UQAT) to assess the hydro-mechanical performance of in situ CPB samples at laboratory scale. The CUAPS apparatus allows the effective curing of CPB samples subjected to an assortment of vertical pressure applications (curing under stresses) that can mimic in situ placement and consolidation conditions. The compressive strength development of CPB samples prepared from sulphide-rich mine tailings from Garpenberg polymetallic mine (Sweden) was investigated using CUAPS apparatus and conventional plastic moulds (unconsolidated undrained samples) in parallel. The effect of curing stress (i.e. simulating different consolidation conditions) on resultant geotechnical index parameters and hydromechanical properties of CPB samples was analyzed. The primary observation is the confirmation that the compressive strength development of the consolidated CPB samples is higher than that of unconsolidated undrained ones. It could be attributed to the removal of excess pore water mainly due to the applied pressure during the effective curing process, which seems to improve consolidation process of the CPB material. The results also account for the differences in the CPB strength observed between laboratory samples and in situ samples. Thus, CUAPS would be more suitable than conventional plastic moulds to collect data for preliminary and final design of CPB systems.     

Recent advances in insulated gate bipolar transistor technology

Device design of the insulated gate bipolar transistor (IGBT) has been optimized to reduce the distributed transmission-line effect. In addition, cell geometry is chosen to yield high latchup current capability and low forward-voltage drop simultaneously. The vertical structure is optimized to enhance both the turn-off speed and the safe operating area of the IGBTs. The turn-off time of the n-IGBT has been shortened to be as low as 40 ns. The p-channel IGBT latchup current has been improved four to six times over the previously reported results through innovative design and processes. An open-base bipolar transistor model has been implemented to investigate transient IGBT characteristics     

Elliptic cylinder geometry for distinguishability analysis in impedance tomography

Electrical impedance tomography (EIT) is a technique that computes the cross-sectional impedance distribution within the body by using current and voltage measurements made on the body surface. It has been reported that the image reconstruction is distorted considerably when the boundary shape is considered to be more elliptical than circular as a more realistic shape for the measurement boundary. This paper describes an alternative framework for determining the distinguishability region with a finite measurement precision for different conductivity distributions in a body modeled by elliptic cylinder geometry. The distinguishable regions are compared in terms of modeling error for predefined inhomogeneities with elliptical and circular approaches for a noncircular measurement boundary at the body surface. Since most objects investigated by EIT are noncircular in shape, the analytical solution for the forward problem for the elliptical cross section approach is shown to be useful in order to reach a better assessment of the distinguishability region defined in a noncircular boundary. This paper is concentrated on centered elliptic inhomogeneity in the elliptical boundary and an analytic solution for this type of forward problem. The distinguishability performance of elliptical cross section with cosine injected current patterns is examined for different parameters of elliptical geometry.     

Effect of heat treatment in air on the thermal properties of SiC fibre-reinforced composite. Part 1: a barium osumilite (BMAS) matrix glass ceramic composite

The thermal properties have been studied on a glass ceramic composite comprised of a barium osumilite (BMAS) matrix reinforced with SiC (Tyranno) fibres which has been subjected to a heat treatment in air in the range of 700–1,200 °C. Microstructural studies were carried out especially on of the interface between fibre and matrix. The presence of a carbon thin layer in the interface is a typical observation in SiC fibre-reinforced glass ceramic matrix composite systems. The microstructural evaluation and thermal properties showed a degradation of interfacial layer occurred at low heat treatment temperatures, (700–800 °C) this was attributed to the fact that, at those heat treatment temperatures the carbon rich layer formed during processing was oxidised away leaving voids between fibre and matrix, which were linked by isolated silicon-rich bridges. After heat treatment at higher temperatures of 1,000–1,200 °C, the thermal properties were retained or even enhanced by leaving a thick interfacial layer.     

The existence and the determination of terminal equations for hybrid connected N-ports

A new procedure for the existence and the determination of terminal equations for the hybrid interconnection of two n-port networks is given. It is shown that this procedure generalizes the previous works of Duffin, Trapp and Mitra for the hybrid sum of terminal impedance matrices which are either Hermitian positive semi-definite (HSD) or arbitrary matrices with complex entries. For the application of the new procedure it is shown that each n-port need not be terminal solvable or well defined. In fact, even in the case of active RLC n-ports considered in sinusoidal steady-state, the previous results of Duffin, Mitra and Trapp established for HSD matrices or arbitrary complex matrices can still be utilized with the use of modified terminal equations, to obtain the terminal equations of the resulting n-port networks. It is also noted that the method introduced in this paper is independent of the choice of generalized inverses.     

Note-against-note two-voice counterpoint by means of fuzzy logic

In this study, we propose a fuzzy logic based approach for the ‘harmonization with constraints’ problem in music. After the mathematical modeling of the harmonization problem, the solution is carried out by means of proper fuzzy membership functions depending on the rules imposed by the music theory. To demonstrate the applicability of the proposed technique, particular problems of note-against-note two-voice counterpoint are considered. The method is flexible, adaptable and simple in terms of implementation. Moreover, from the constraint satisfaction perspective, the solutions generated by the method satisfy ‘arc-consistency’; which could not have been achieved by majority of the previous studies existing in the literature. The method also provides a gateway for the arranger/composer to incorporate his/her own stylistic preferences to the solution by simply adjusting the shapes of the membership functions. Additional features (such as providing variability in the final solutions at different executions) increase the power of the method in terms of creativity. This approach can be extended for the solution of more complicated problems in music such as orchestration, improvisation, and even composition.     

Competitive Randomized Nonlinear Prediction Under Additive Noise

We consider sequential nonlinear prediction of a bounded, real-valued and deterministic signal from its noise-corrupted past samples in a competitive algorithm framework. We introduce a randomized algorithm based on context-trees . The introduced algorithm asymptotically achieves the performance of the best piecewise affine model that can both select the best partition of the past observations space (from a doubly exponential number of possible partitions) and the affine model parameters based on the desired clean signal in hindsight. Although the performance measure including the loss function is defined with respect to the noise-free clean signal, the clean signal, its past samples or prediction errors are not available for training or constructing predictions. We demonstrate the performance of the introduced algorithm when applied to certain chaotic signals.      

Polar Lipids Reduce In Vitro Duodenal Lipolysis Rate of Oat Oil and Liquid Oat Base Products

Alternative ways for increased appetite control are today widely sought for due to the growing global health issues connected to obesity. In in vivo studies, oat has been proven an attractive candidate for inducing satiety. Oat is rich in polar lipids, of which the galactolipids are especially interesting, and a hypothesis is that these lipids play an important role for the ileal brake mechanism. In this study, the aim is to investigate the role of polar oat lipids on pancreatic lipolysis rate, using a pH-stat based in vitro digestion model of the duodenum. Lipolysis of oat oil, a mix of oat oil/rapeseed oil (RSO), as well as a liquid oat base (OB) simulating an oat drink with different polar lipid content are investigated, and compared with RSO as control. Increasing the polar lipid content of the product digested leads to a significantly decreased lipolysis rate, and this effect is even observed when mixing RSO with a low amount of oat oil (10%). The results support the hypothesis that polar lipids can delay lipolysis also in a complex, natural system like the liquid OB, and even a minor amount of oat lipids can have large effect on lipolysis rates. Practical applications: The number of studies connecting galactolipids with a decreasing effect on duodenal lipolysis is growing; however, the mechanism behind this phenomenon is still not clarified. Here, the same effect is seen in a complex, natural food system. These findings open up for interesting future food products, where inclusion of oat oil, even at low concentrations, can have a prolonging effect on satiety. Oat for human consumption is an increasing market, thanks to the positive health benefits oat has been connected to, in combination with the current trend toward climate-friendly plant-based options for meat and dairy products. It is believed that oat oil can be attractive as an ingredient in various food products, for example, protein bars and spreads. More studies are needed to confirm the results in vivo. However, a great potential is seen for the use of oat oil to enhance appetite control.