Ways of strengthening biodegradable soy‐dreg plastics

Biodegradable plastics (GSD) based on soy dreg (SD) were prepared by compression‐molding, with glycerol as the plasticizer and glutaraldehyde (GA) as the cross‐linker. The structure and properties of the GSD sheets were investigated by Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), scanning electron microscope (SEM), and tensile test methods. The results indicate that when GA content was 6.8%, the tensile strength (σ_b) of the sheet reached the maximum value of 14.5 MPa. Moreover, the strength and water resistance of the sheets coated with castor‐oil‐based polyurethane/nitrochitosan interpenetrating network (IPN) coating were significantly enhanced to 24.6 MPa in the dry state and 9.8 MPa in the wet state. Simultaneously, the test of biodegradability of the GSD sheet in a mineral salts medium containing microorganisms and agar proved that GSD could be fully biodegradable. This work has provided a novel way to utilize low‐cost SD to prepare biodegradable plastics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 422–427, 2003     

ZW多产品间歇过程调度及在线调整

针对多产品间歇过程调度提出了分层递阶的Petri网建模方法，利用赋时Petri和Petri网的简化技术描述不同层次的生产问题，具有很强的模型描述能力。另外，在调度决策层可以方便地集成优化策略和在线调整算法，使问题求解更加灵活。     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Analysis of the polyethylene glycol glucosides and FA esters thereof by atmospheric-pressure ionization MS

Polyethylene glycol (PEG) glucosides (PEGG) and the PEGG esters of lauric acid were analyzed by atmospheric-pressure ionization MS (API-MS) with electrospray ionization. Straightforward mass characterization of the complex mixtures could be achieved without prior chromatographic separation. The constituents were identified on the basis of quasi-molecular ions. Individual components could be observed as protonated molecular ions [M+H]⁺ and/or as their NH₄ ⁺, Na⁺, or K⁺ adducts in positive ion mode. The mass spectrometric investigation showed that mixtures of PEGG consisted of monoglucoside, diglucoside, polyglucoside, and free PEG. The esterification product is a mixture of two types of nonionic surfactants: PEG-laurates and PEGG-laurates. The reasons for distortion of the quasi-molecular ion intensities and the stabilization of adduct ions were discussed. The rapid and highly sensitive API-MS analysis technique proposed here is well suited for direct characterization of complex mixtures and suitable for development as a routine analytical method.     

Performance evaluation of electrodewatering system for sewage sludges

A laboratory-scale electrodewatering system, incorporating an electric field as an additional driving force to conventional pressure dewatering, has been developed to decrease the water content of sludges generated in wastewater treatment. Consisting of a piston-type filter press, a power supply and a data acquisition system, the electrodewatering system’s performance was evaluated as a function of applied pressure, applied voltage, sludge type and filtration time. Experiments were carried out using sewage sludges with the electric field up to 120 V/cm and pressure ranging from 98.1 to 392.4 kPa. Electrodewatering involving a combination of electric field and pressure enhances both the dewatering rate and final dewatered volume. The final water content of sewage sludges in the electrodewatering system can be reduced to 62 wt%, as compared to 78 wt% achieved with the pressure filtration alone. The electrodewatering system shows the potential to be an effective method for reducing the water content in sludges.     

Synthesis and characterization of poly(1,8-diethynylnaphthalene)

Summary The cyclopolymerization of 1,8-diethynylnaphthalene(DEN) and its copolymerization with diethyl dipropargylmalonate(DEDPM) were carried out by various transition metal catalysts. MoCl₅-based catalyst was found to be very effective and gave almost a quantitative polymer yield. The resulting dark-brown homopolymer(PDEN) was partially soluble in chloroform, tetrahydrofuran, and dimethyl sulfoxide, whereas copolymer (1:1) with number avaerage molecular weight of 2.1x10⁴ by GPC showed good solubility in those solvents. The structure of the polymers was analysed by IR, NMR, and UV-VIS spectroscopies. From the spectral and solubility data, it is proposed that cyclized products with the conjugated system are formed. Room temperature conductivities of the I₂-doped homo and copolymer were found to be about 7.5x10^-3 and 5.1x10^-3 S/cm, respectively.     

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact flocs. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser flocs. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.     

Electrical properties of (Bi3.5La0.5)Ti3O12 thin-films prepared by liquid source misted chemical deposition

The ((Bi_3.5La_0.5)Ti₃O₁₂(BLT) thin-films used in this study were fabricated on a Pt(111)/SiO₂/Si(100) substrate by a Liquid Source Misted Chemical Deposition (LSMCD) technique. X-ray diffraction patterns showed that the BLT films were crystallized and no other phases were observed when annealed above 650 ‡C. Grain size and remnant polarizations increased with increase in the annealing temperature, while leakage current densities decreased. The remnant polarizations (Pr) increased from 2.0 to 4.8 and 19.0 μC/cm2 with increase in the annealing temperature from 650 to 700 and 750 ‡C, respectively. The BLT films annealed at 700 ‡C in O₂ showed a good fatigue resistance of reduced polarization by 10% after 10⁹ switching cycles when 9 V of bipolar voltage was applied at a frequency of 40 kHz.     

Fabrication of SiO2-ZrO2 composite fiber mats via electrospinning

(1 − x)SiO₂-(x)ZrO₂ (x = 0.1, 0.2) composite fiber mats were prepared by electrospinning their sol-gel precursors of zirconium acetate and tetraethyl orthosilicate (TEOS) without using a polymer binder. The electrospun composite fibers were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FT-IR) and mercury porosimetry. The composite fibers having a tetragonal crystalline ZrO₂ were obtained by calcining the electrospun composite fibers at high temperatures. The results show that the structure and crystallization of ZrO₂ in the composite fibers can be controlled by sintering temperature, while the porosity and morphology of the fiber mats did not depend on the sintering temperature.     

乐果合成釜故障分析及处理

通过增加底轴承来改变搅拌轴的临界转速,解决了乐果合成釜试车过程中震动较大的问题,达到了生产和工艺要求。