Scalability of hybrid programming for a CFD code on the Earth Simulator

The Earth Simulator (ES) is an SMP cluster system. There are two types of parallel programming models available on the ES. One is a flat programming model, in which a parallel program is implemented by MPI interfaces only, both within an SMP node and among nodes. The other is a hybrid programming model, in which a parallel program is written by using thread programming within an SMP node and MPI programming among nodes simultaneously. It is generally known that it is difficult to obtain the same high level of performance using the hybrid programming model as can be achieved with the flat programming model.

In this paper, we have evaluated scalability of the code for direct numerical simulation of the Navier–Stokes equations on the ES. The hybrid programming model achieves the sustained performance of 346.9 Gflop/s, while the flat programming model achieves 296.4 Gflop/s with 16 PNs of the ES for a DNS problem size of 256³. For small scale problems, however, the hybrid programming model is not as efficient because of microtasking overhead. It is shown that there is an advantage for the hybrid programming model on the ES for the larger size problems.     

Simultaneous structure and elastic wave velocity measurement of SiO2 glass at high pressures and high temperatures in a Paris-Edinburgh cell

An integration of multi-angle energy-dispersive x-ray diffraction and ultrasonic elastic wave velocity measurements in a Paris-Edinburgh cell enabled us to simultaneously investigate the structures and elastic wave velocities of amorphous materials at high pressure and high temperature conditions. We report the first simultaneous structure and elastic wave velocity measurement for SiO(2) glass at pressures up to 6.8 GPa at around 500°C. The first sharp diffraction peak (FSDP) in the structure factor S(Q) evidently shifted to higher Q with increasing pressure, reflecting the shrinking of intermediate-range order, while the Si-O bond distance was almost unchanged up to 6.8 GPa. In correlation with the shift of FSDP position, compressional wave velocity (Vp) and Poisson's ratio increased markedly with increasing pressure. In contrast, shear wave velocity (Vs) changed only at pressures below 4 GPa, and then remained unchanged at ~4.0-6.8 GPa. These observations indicate a strong correlation between the intermediate range order variations and Vp or Poisson's ratio, but a complicated behavior for Vs. The result demonstrates a new capability of simultaneous measurement of structures and elastic wave velocities at high pressure and high temperature conditions to provide direct link between microscopic structure and macroscopic elastic properties of amorphous materials.     

Superior electrocatalytic activity of mesoporous Au film templated from diblock copolymer micelles

Mesoporous Au films consisting of a network of interconnected Au ligaments around ultra-large pores were found to exhibit a promising electrocatalytic activity towards sluggish reactions. Mesoporous Au films with pore sizes up to 25 nm were successfully fabricated using a polymeric micelle approach. A superior catalytic activity of the mesoporous Au films towards methanol oxidation was confirmed, which was thoroughly analyzed and compared with that of other Au materials. An intrinsic investigation on the high catalytic activity revealed that the superior performance of the as-prepared mesoporous Au film was related to its unique atomic structures around the mesopores with well-crystallized facets and several step/kink sites on the Au surfaces. These findings showcase a strategic and feasible design for preparing highly active Au-based catalysts that could be used as promising candidates in electrocatalytic applications.

Open image in new window

     

A versatile planar QCM-based sensor design for nonlabeling biomolecule detection

Despite high theoretical sensitivity, low-cost manufacture, and compactness potentially amenable to lab-on-a-chip use, practical hurdles have stymied the application of the quartz crystal microbalance (QCM) for aqueous applications such as detection of biomolecular interactions. The chief difficulty lies in achieving a sufficiently stable resonance signal in the presence of even minute fluctuations in hydrostatic pressure. In this work, we present a novel versatile planar sensor chip design (QCM chip) for a microliter-scale on-line biosensor. By sealing the quartz resonator along its edges to a flat, solid support, we provide uniform support for the crystal face not exposed to solvent, greatly decreasing deformation of the crystal resonator under hydrostatic pressure. Furthermore, this cassette design obviates the need for direct handling when exchanging the delicate quartz crystal in the flow cell. A prototype 27-MHz sensor signal exhibited very low noise over a range of flow rates up to 100 microL/min. In contrast, signals obtained from a conventional QCM sensor employing an O-ring-based holder were less stable and deteriorated even further with increasing flow rate. Additional control designs with intermediate amounts of unsupported undersurface yielded intermediate levels of stability, consistent with the interpretation that deformation of the crystal resonator under fluctuating hydraulic pressure is the chief source of noise. As a practical demonstration of the design's high effective sensitivity, we readily detected interaction between myoglobin and surface-bound antibody.     

Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

One-step route to a hybrid TiO2/TixW1?xN nanocomposite by in situ selective carbothermal nitridation

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti_xW_1−xN) was synthesized by an ammonia-free sol–gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti_xW_1−xN at low W content to an isostructural mixture of Ti-rich and W-rich Ti_xW_1−xN at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.     

Effect of water distribution in gas diffusion layer on proton exchange membrane fuel cell performance

Water management of proton exchange membrane fuel cells remains a prominent issue in research concerning fuel cells. In this study, the gas diffusion layer (GDL) of a fuel cell is partially treated with a hydrophobic agent, and the effect of GDL hydrophobicity on the water distribution in the fuel cell is examined. First, the effect of the position of the cathode GDL hydrophobic area relative to the channel on the fuel cell performance is investigated. Then, the water distribution in the fuel cell cathode GDL is observed using X-ray imaging. The experimental results indicate that when the hybrid GDL's hydrophobic area lies on the channel, water tends to accumulate under the rib, and the water content in the channel is low; this improves the fuel cell performance. When the hydrophobic area is under the rib, the water distribution is more uniform, but the performance deteriorates.     

Proposal of resilience assessment by focusing on pliability

Resilience is a concept which presents the strength of mind necessary to adopt the difficulties and to recover from negative psychological state. The assessment for resilience has been assessed by using interview and questionnaire which depend on subjectivity of participants. Though the objective assessment for resilience is expected to advance the biofeedback treatment, neither effective method nor instrument have been developed. Then this study focuses on the pliability as one of aspects of resilience and experimentally verifies whether it becomes a novel index for resilience or not.     

Effects of Gd Substitution on Sintering and Optical Properties of Highly Transparent (Y0.95−xGdxEu0.05)2O3 Ceramics

Highly transparent (Y_0.95?xGd_xEu_0.05)₂O₃ (x = 0.15–0.55) ceramics have been fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h with the in‐line transmittances of 73.6%–79.5% at the Eu³⁺ emission wavelength of 613 nm (~91.9%–99.3% of the theoretical transmittance of Y_1.34Gd_0.6Eu_0.06O₃ single crystal), whereas the x = 0.65 ceramic undergoes a phase transformation at 1650°C and has a transparency of 53.4% at the lower sintering temperature of 1625°C. The effects of Gd³⁺ substitution for Y³⁺ on the particle characteristics, sintering kinetics, and optical performances of the materials were systematically studied. The results show that (1) calcining the layered rare‐earth hydroxide precursors of the ternary Y–Gd–Eu system yielded rounded oxide particles with greatly reduced hard agglomeration and the particle/crystallite size slightly decreases along with increasing Gd³⁺ incorporation; (2) in the temperature range 1100°C–1480°C, the sintering kinetics of (Y_0.95?xGd_xEu_0.05)₂O₃ is mainly controlled by grain‐boundary diffusion with similar activation energies of ~230 kJ/mol; (3) Gd³⁺ addition promotes grain growth and densification in the temperature range 1100°C–1400°C; (4) the bandgap energies of the (Y_0.95?xGd_xEu_0.05)₂O₃ ceramics generally decrease with increasing x; however, they are much lower than those of the oxide powders; (5) both the oxide powders and the transparent ceramics exhibit the typical red emission of Eu³⁺ at ~613 nm (the ⁵D₀→⁷F₂ transition) under charge transfer (CT) excitation. Gd³⁺ incorporation enhances the photoluminescence and shortens the fluorescence lifetime of Eu³⁺.     

Research and Development of the Coprecipitation Process for Lanthanum Germanate Oxyapatite

Although lanthanum germanate oxyapatite (La–Ge–O) has shown good potential for use as a solid electrolyte in energy storage applications, its synthesis has been challenging by either solid‐ or solution‐state methods. In this study, a new synthesis of La–Ge–O was developed through a coprecipitation technique, in which a highly concentrated homogeneous aqueous solution of La and Ge was prepared from aqueous ammonium germanate and lanthanum nitrate solutions with the addition of dilute nitric acid. Several precipitates were formed by pH manipulation, including an amorphous material obtained at pH > 3. Compared to the individual precipitation behaviors of the parent compounds, the amorphous precipitate was formed only from the aqueous two‐component mixture, and appeared to contain both metals. This material was transformed into crystalline mixtures upon heating at 1273 K. The crystalline phases were La₂Ge₃O₉ and hexagonal‐type GeO₂ when the precipitate was formed below pH 8, and the La–Ge–O and La₂Ge₂O₇ phases when the precipitate was formed around pH 8. Product formation from the coprecipitate was discussed based on X‐ray diffraction and thermal analyses. The improved availability of La–Ge–O will allow more extensive investigations of its useful properties.