Four pi calibration and modeling of a bare germanium detector in a cylindrical field source

In this paper we describe a 4π cylindrical field acquisition configuration surrounding a bare (unshielded, uncollimated) high purity germanium detector. We perform an efficiency calibration with a flexible planar source and model the configuration in the 4π cylindrical field. We then use exact calculus to model the flux on the cylindrical sides and end faces of the detector. We demonstrate that the model accurately represents the experimental detection efficiency compared to that of a point source and to Monte Carlo N-particle (MCNP) calculations of the flux. The model sums over the entire source surface area and the entire detector surface area including both faces and the detector's cylindrical sides. Agreement between the model and both experiment and the MCNP calculation is within 8%.     

Integrated framework of risk evaluation and risk allocation with bounded data

This paper presents an integrated framework for risk evaluation and risk allocation with bounded data in a critical risk management. A risk evaluation framework using the Imprecise Data Envelopment Analysis (IDEA) method is proposed to be applied to operations of Korean Army helicopters. The risks pertaining to pilots, missions and helicopters are evaluated based on bounded data, and pilots are appropriately allocated to missions and helicopters using goal programming with bounded risk scores. Using bounded data, two risk allocation models are developed to be used with the expected value and lower/upper limit values, resulting in improved reliability of the solutions. Numerical experiments show reasonable solutions and valuable information for risk management.     

Existence of3He-vacancy bound states in4He crystals

Bound states and scattering resonances for a ³He-vacancy system in crystalline ⁴He are shown to exist. For realistic physical parameters the theory yields binding energies of 0.1 K. It is found that the bound states and scattering resonances tend to enhance the diffusion coefficient of ³He. The experimental consequences of this enhanced diffusion are discussed.     

Tables in text

Tables were inserted into a four page article, and subjects were asked to scan the text which was printed in a two-column or a single-column format. The single-column format was scanned significantly faster than the double-column layout, and there were marked reader preferences for the single-column layout.     

Fabrication of Er3+/Pr3+ Co-doped soda-lime glass thin films using RF magnetron sputtering method and optical property characterization

Er^3+/Pr³⁺ co-doped soda-lime glass thin films have been fabricated using RF magnetron sputtering method and their structural and optical properties have been studied. Deposition rate, crystallinity, and composition of glass thin films were investigated by scanning electron microscopy, transmission electron microscopy, and electron probe micro area analysis. Refractive index, birefringence and binding characteristics have been investigated using a prism coupler and X-ray photoelectron spectroscopy. Er³⁺/Pr³⁺ co-doped soda lime glass thin films were prepared by changing substrate temperature (room temp. ∼550^∘C), RF power (90 W–130 W), and Ar/O₂ gas flow ratio at processing pressure of 4 mTorr. Glass thin films could be obtained at the optimized processing condition at 350^∘C, RF power of 130 W, and gas flow of Ar:O₂ = 40:0 with maximum deposition rate of 1.6 μm/h. Refractive index and birefringence increased from 1.5614 to 1.5838 and from 0.000154 to 0.000552, respectively, as the content of Pr³⁺ increased. Binding energy of Pr3d also increased as the content of Pr³⁺ increased.     

Preparation of lithium-ion polymer battery using LiNi1/3Co1/3Mn1/3O2 as a cathode material and its electrochemical properties

In this work, LiNi_1/3Mn_1/3Co_1/3O₂ powders were synthesized from co-precipitated spherical metal hydroxide. In the voltage range of 2.8–4.2, 2.8–4.4, and 2.8–4.6 V, the discharge capacities of LiNi_1/3Mn_1/3Co_1/3O₂ electrode were 163, 177, and 193 mAh⋅g⁻¹, respectively. A gel polymer electrolyte (GPE) was also prepared using polyoxyalkylene glycol acrylate (POAGA) as a macromonomer. LiNi_1/3Mn_1/3Co_1/3O₂/GPE/graphite cells were prepared and their electrochemical properties were evaluated at various current densities and temperatures. The ionic conductivity of the GPE was more than 6.2 × 10⁻³ S⋅cm⁻¹ at room temperature. POAGA-based cells were showed good electrochemical performances such as rate capability, low-temperature performance, and cycleability.     

Preparation of a sensor substrate using functionalized mesoporous silica on a gold film for surface plasmon resonance (SPR) spectroscopy

The use of surface plasmon resonance (SPR) spectroscopy has been applied to a wide variety of fields such as biosensors and surface analysis instruments. In general, a SPR substrate is prepared using self-assembled monolayer (SAM) method of organic molecules as receptor for the target on a layer of gold or silver. However, mesoporous inorganic materials such as SBA-15 have benefits as sensor substrate for SPR. Mesoporous silica has a large surface area which receptor molecule can be attached and has a rigid body which has an excellent stability in the extreme condition compared to organic sensing layer. We prepared an organic modified mesoporous silica and successfully immobilized it on a gold surface, in an attempt to use as a substrate for SPR spectroscopy. For the comparison of sensitivity of prepared substrate, Pt²⁺ detection was selected as a model system. Substrate prepared in this study exhibited the capability of selective sensing for Pt²⁺ ions.     

A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

A planar monopole antenna with a staircase shape and small volume (25/spl times/26/spl times/1 mm/sup 3/) is proposed in this paper. With the use of a half-bowtie radiating element, the staircase-shape, and a modified ground plane structure, the proposed antenna has a very wide impedance bandwidth measured at about 11.6 GHz (2.9-14.5 GHz, bandwidth ratio about 1:5) below VSWR 2 including the WLAN band notched in the vicinity of 5 GHz. An omnidirectional radiation pattern is obtained. The group delay which is an indication of linearity between two proposed antennas is less than 1 ns. The electrical characteristics in terms of frequency and time domains and physical ones of the proposed antenna make it attractive for use in ultrawideband (UWB) systems.