An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

Transient electroluminescence determination of carrier mobility and charge trapping effects in heavily doped phosphorescent organic light-emitting diodes

Transient electroluminescence (EL) was used to measure the delay between the excitation pulse and onset of emission in OLEDs based on phosphorescent bis[3,5-bis(2-pyridyl)-1,2,4-triazolato] platinum(ΙΙ) doped into 4,4′-bis(carbazol-9-yl) triphenylamine (CBP), from which an electron mobility of 3.2 × 10⁻⁶ cm²/V s was approximated. Delayed recombination was observed after the drive pulse had been removed and based on its dependence on frequency and duty cycle, ascribed to trapping and de-trapping processes associated with disorder-induced carrier localization at the interface between the emissive layer and electron blocker. The data suggests that the exciton recombination zone is at, or close to the interface between the emissive layer and electron blocker. Despite the charge trapping effects, a peak power efficiency of 24 lm/W and peak external quantum efficiency of 10.64% were obtained. Mechanisms for the electroluminescence and delayed recombination are proposed.     

Controversy over cellular mobile-telecommunication base-station-antenna installations

The two most compelling issues that cause cellular-telephone towers to be so controversial are the public health and aesthetic concerns. People love the wireless convenience and instant connectivity, but no one likes the antenna tower that enables it. The siting of the cellular mobile telephone towers remains a divisive issue, worldwide. Some concerns stem from a lack of personal freedom of choice, in being subjected to the radio-frequency radiation emitted by the tower antennas and its potential health effects. Others have raised concerns about aesthetics and property devaluation. Cell-phone towers with graceful and artistic designs that are tastefully constructed would go a long way toward calming the fears of those who abhor the presence of ugly-cell phone towers looming over homes and businesses. It would be propitious both for the wireless telecommunications industry and the local planning and zoning commissions to collaborate in creating innovative solutions to the design, siting, and installation of cellular telecommunication base-station towers.     

Comments on "A noncoherent tracking loop with diversity and multipath interference cancellation for direct-sequence spread-spectrum systems"

For original paper see IEEE Trans. Commun., vol.46, p.1516-24 (1998 November). In the original paper, the authors presented a noncoherent tracking loop with diversity and multipath interference cancellation to improve the loop performance on frequency-selective fading channels. However, the effects of imperfections in multipath interference cancellation have been dropped out in the statistical analyses, and only evaluated by using computer simulations. The present authors show that such effects can change the error characteristic, at least in the mean sense, and thus make the analyses of jitter performance improper.     

Turbo encoding and decoding of Reed-Solomon codes through binary decomposition and self-concatenation

This paper presents a two-stage turbo-coding scheme for Reed-Solomon (RS) codes through binary decomposition and self-concatenation. In this scheme, the binary image of an RS code over GF(2/sup m/) is first decomposed into a set of binary component codes with relatively small trellis complexities. Then the RS code is formatted as a self-concatenated code with itself as the outer code and the binary component codes as the inner codes in a turbo-coding arrangement. In decoding, the inner codes are decoded with turbo decoding and the outer code is decoded with either an algebraic decoding algorithm or a reliability-based decoding algorithm. The outer and inner decoders interact during each decoding iteration. For RS codes of lengths up to 255, the proposed two-stage coding scheme is practically implementable and provides a significant coding gain over conventional algebraic and reliability-based decoding algorithms.     

A 21-mW 8-b 125-MSample/s ADC in 0.09-mm/sup 2/ 0.13-/spl mu/m CMOS

This paper presents an 8-b two-step subranging analog-to-digital (ADC) using interpolation, averaging, offset compensation, and pipelining techniques to accomplish an effective number of bits of 7.6 b at 125 MSample/s. The 0.13-/spl mu/m CMOS ADC occupies 0.09 mm/sup 2/ and consumes 21 mW.     

A Photo Certificate-A Framework for Generating Visualized Public Key Certificates

In the proposed photo certificate, the principal component is the image, for example, the user's photo. User-related fields, such as the subject's name, the issuer's name, and the expiration period, which are meaningful to users, are embedded into the surface of the photo by using a visible watermark algorithm, so that the reader can capture this information without the requirement for special software. The remaining fields in the certificate are embedded into a marked photo. Later, the whole photo certificate is cryptographically signed by certification authority (CA) private key to guarantee the integrity of our photo certificate. By such arrangement, the certificate's verification is divided into two layers. The first layer is human visual system oriented and the second layer is the software-oriented. User can determine whether the user's photo and its subject's name are consistent and check whether the expired period is valid first. The second layer's verification is lunched only when the first layer's verification is passed. To sum up, the proposed photo certificate not only inherits the functions of a traditional certificate, but also provides a friendlier operational environment of X.509 certificate.     

去除块效应的图像后处理算法

分析了图像后处理技术的最新发展成果,重点研究了几种重要的后处理算法,比较了它们的性能,最后提出了目前的问题和以后的发展方向。     

Channel interference reduction using random Manchester codes forboth synchronous and asynchronous fiber-optic CDMA systems

We propose the random Manchester codes (RMC) to improve the bit error probability (BEP) performance in both synchronous and asynchronous fiber-optic code-division multiple-access (CDMA) systems. The spreading sequences used in the synchronous and asynchronous systems are modified prime sequence codes and optical orthogonal codes (OOCs), respectively. Thermal noise, shot noise, and avalanche photodiode (APD) bulk and surface leakage currents are taken into consideration in the BEP analyzes. The results show that the proposed systems can support a larger number of simultaneous users than other systems with similar system complexity under the same bit-error probability constraint     

An adaptive 3-D discrete cosine transform coder for medical imagecompression

A new three-dimensional (3-D) discrete cosine transform (DCT) coder for medical images is presented. In the proposed method, a segmentation technique based on the local energy magnitude is used to segment subblocks of the image into different energy levels. Then, those subblocks with the same energy level are gathered to form a 3-D cuboid. Finally, 3-D DCT is employed to compress the 3-D cuboid individually. Simulation results show that the reconstructed images achieve a bit rate lower than 0.25 bit per pixel even when the compression ratios are higher than 35. As compared with the results by JPEG and other strategies, it is found that the proposed method achieves better qualities of decoded images