A wide-bandwidth low-noise InGaAsP-InAlAs superlattice avalanchephotodiode with a flip-chip structure for wavelengths of 1.3 and 1.55μm

The authors reports the fabrication of a flip-chip InGaAsP-InAlAs superlattice avalanche photodiode using gas source molecular beam epitaxy. The incident light reaches the InGaAs photoabsorption layer through the InP substrate and an InGaAsP-InAlAs superlattice multiplication region which are transparent for wavelengths of 1.55 and 1.3 μm. The light reflection by the electrode enables the absorption layer to be as thin as 0.8 μm without significantly reducing the quantum efficiency. A maximum bandwidth of 17 GHz was obtained at a low multiplication factor because the transit time through the absorption layer is reduced     

Identification of a methanol-inducible promoter from Rhodococcus erythropolis PR4 and its use as an expression vector

The genus Rhodococcus exhibits a broad range of catalytic activity and is tolerant to various kinds of organic solvents. This property makes rhodococci suitable for use as a whole-cell catalyst. Various tools for genetic engineering have been developed to use Rhodococcus erythropolis as a host for bioconversion. In this study, we investigated the protein expression responses of R. erythropolis strains and found that isocitrate lyase production in R. erythropolis PR4 (ICL(Re)) was induced by methanol. By analyzing the regulation mechanisms of icl(Re) expression, the ~200-bp upstream region from the first nucleotide of the translation initiation codon of icl(Re) was shown to be sufficient for the methanol-inducible expression. Also, the ~100-bp upstream region exhibited strong constitutive promoter activity by an unknown mechanism(s). By investigating proteins that bound to the upstream region of icl(Re)in vitro, a RamB homologue of R. erythropolis PR4 (RamB(Re)) was identified. Moreover, 2 putative RamB(Re) binding sites were identified in the upstream region of icl(Re) through pull-down assays. A ramB(Re) knockout experiment suggested that RamB(Re) negatively controlled the expression of icl(Re) and that RamB(Re) regulation was dependent on the availability of a carbon source. On the basis of these findings, we were able to create novel methanol-inducible and strong constitutive expression vectors.     

In vitro construction and screening of a Burkholderia cepacia lipase library using single-molecule PCR and cell-free protein synthesis

A mutant library of Burkholderia cepacia lipase KWI-56 was constructed on microplates by a cell-free process and tested with a chromogenic assay. This high-throughput construction system can be used to screen mutant proteins based on their catalytic activity.     

Estimates of embodied global energy and air-emission intensities of Japanese products for building a Japanese input-output life cycle assessment database with a global system boundary

To build a life cycle assessment (LCA) database of Japanese products embracing their global supply chains in a manner requiring lower time and labor burdens, this study estimates the intensity of embodied global environmental burden for commodities produced in Japan. The intensity of embodied global environmental burden is a measure of the environmental burden generated globally by unit production of the commodity and can be used as life cycle inventory data in LCA. The calculation employs an input-output LCA method with a global link input-output model that defines a global system boundary grounded in a simplified multiregional input-output framework. As results, the intensities of embodied global environmental burden for 406 Japanese commodities are determined in terms of energy consumption, greenhouse-gas emissions (carbon dioxide, methane, nitrous oxide, perfluorocarbons, hydrofluorocarbons, sulfur hexafluoride, and their summation), and air-pollutant emissions (nitrogen oxide and sulfur oxide). The uncertainties in the intensities of embodied global environmental burden attributable to the simplified structure of the global link input-output model are quantified using Monte Carlo simulation. In addition, by analyzing the structure of the embodied global greenhouse-gas intensities we characterize Japanese commodities in the context of LCA embracing global supply chains.     

Temperature dependence for anammox bacteria enriched from freshwater sediments

The anoxic ammonium oxidation (anammox) process has been regarded as an attractive alternative process to treat wastewater containing high ammonium concentrations. By the implementation of anammox process at moderately low temperatures (<25°C), the anammox process will be applied to more various industrial wastewater treatments. In this study, we established enrichment cultures of anammox bacteria from freshwater sediments by using an up-flow column reactor equipped with porous polyester nonwoven fabric at moderately low temperatures. Their nitrogen conversion rates reached 0.07-0.26kg-N/m(3)/d. Phylogenetic analysis based on 16S rRNA gene from enrichment cultures revealed the presence of various anammox bacteria affiliated with unknown anammox bacteria as well as known anammox candidates, i.e., Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia fulgida, Candidatus Scalindua wagneri. Anammox bacterial populations were influenced by enrichment conditions, i.e., seed sediments and temperature.     

Distribution, characteristics, and worldwide inventory of dioxins in kaolin ball clays

Distribution, characteristics, and global inventory of dioxins (polychlorinated dibenzo-p-dioxins [PCDDs] and dibenzofurans [PCDFs] and dioxin like polychlorinated biphenyls) in kaolin clays collected from 10 countries were investigated. Dioxins were found in all kaolin clay samples analyzed, at total concentrations ranging from 1.2 pg/g (Brazil) to 520,000 pg/g (USA). Dioxin concentrations in kaolin clays from a few countries (e.g., Brazil and UK) were lower than those reported for background soils in Japan. Dioxin profiles in kaolin clays were characterized by the domination of the congener octachlorodibenzo-p-dioxin (OCDD), and the concentrations of other congeners decreased in the order of reduction in the levels of chlorination. Furthermore, specific distribution of congeners, with predominant proportions of 1,4,6,9-substituted PCDDs within each homologue group, was found in most clay samples. The ratios of concentrations of PCDD to PCDF and 1,2,3,7,8,9-HxCDD to 1,2,3,6,7,8-HxCDD indicated differences in the profiles found for anthropogenic sources (including pentachlorophenol) and kaolin clays. Concentrations of PCDD/Fs in kaolin clays, except for American ball clays, did not exceed the environmental criteria set by the Law Concerning Special Measures against Dioxins in Japan. Based on the average concentrations measured in our study, inventories of PCDD/Fs from the production/usage of ball clays on a global scale were estimated to be 650 kg/yr; the corresponding value on a TEQ basis is 2400 g-TEQ/yr. More than 480 kg of OCDD is estimated to be released annually from the production of kaolin clays worldwide, suggesting that kaolin clays can be a major contributor for additional source of dioxins, especially OCDD, in the environment.     

A survey of perfluorooctane sulfonate and related perfluorinated organic compounds in water,fish, birds,and humans from Japan

Occurrence of perfluorooctane sulfonate (PFOS) in the tissues of humans and wildlife is well documented. In this study, concentrations and distribution of PFOS, perfluorohexane sulfonate (PFHS), and perfluorobutane sulfonate (PFBS) were determined in samples of surface water, fish and bird blood and livers, and human blood collected in Japan. Notable concentrations of PFOS were found in surface water and fish from Tokyo Bay. PFOS was found in all of the 78 samples of fish blood and liver analyzed. Based on the concentrations of PFOS in water and in fish livers, bioconcentration factors were calculated to range from 274 to 41 600. Concentrations of PFOS in the blood of Japanese human volunteers ranged from 2.4 to 14 ng/mL. PFHS was detected in 33% of the fishes analyzed, at concentrations severalfold less than those of PFOS.     

Ribotyping and a study of transmission of Staphylococcus aureus collected from food preparation facilities

Food poisoning from Staphylococcus aureus is sometimes caused by improper handling of food items in food preparation facilities. Prevention of contamination by employees is particularly important in facilities where a significant amount of food preparation is performed by hand. Some experiments have been performed to describe bacterial cross-contamination in the food preparation process, but there have been few studies of cross-contamination in actual food preparation facilities. Aiming to shed light on the transmission of S. aureus in food preparation facilities, this study collected samples of 66 strains of this bacterium from the fingers of food preparation staff, foodstuffs, prepared foods, cooking utensils, and cooking equipment and typed them with the ribotyping method. S. aureus from the same ribogroup was detected on the hands of a study participant, a faucet, knife, frying pan, and a salad, indicating that bacteria found on the hands of the study participant was transmitted to cooking utensils and prepared foods. Transmission (from a faucet to a frying pan handle) of bacteria by another person, a third party, was also detected.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Development of Sensor and Control Systems of a Wearable Robot to Walk on a Step

The goal of our study is to develop a system for walking on a step using a wearable robot. Our system consists of (1) sensing of a step from the movement of the walker, (2) detection of the foot placement state related to the step, and (3) generation of gait patterns of climbing and stepping down for the step. In the generation of gait patterns for the step, toe trajectories are generated according to the height of the step to avoid collision of the swinging leg with the step. The hip trajectory is generated by an optimization technique that minimizes the sum of the joint angular jerk of the robot subject to constraints on the hip position and the velocity at toe liftoff. Each joint angle trajectory is calculated from the generated trajectories by means of inverse kinematic equations. We investigated the feasibility of the proposed sensor and control systems for two steps with different heights.