Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 μm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 μm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.     

Distribution, characteristics, and worldwide inventory of dioxins in kaolin ball clays

Distribution, characteristics, and global inventory of dioxins (polychlorinated dibenzo-p-dioxins [PCDDs] and dibenzofurans [PCDFs] and dioxin like polychlorinated biphenyls) in kaolin clays collected from 10 countries were investigated. Dioxins were found in all kaolin clay samples analyzed, at total concentrations ranging from 1.2 pg/g (Brazil) to 520,000 pg/g (USA). Dioxin concentrations in kaolin clays from a few countries (e.g., Brazil and UK) were lower than those reported for background soils in Japan. Dioxin profiles in kaolin clays were characterized by the domination of the congener octachlorodibenzo-p-dioxin (OCDD), and the concentrations of other congeners decreased in the order of reduction in the levels of chlorination. Furthermore, specific distribution of congeners, with predominant proportions of 1,4,6,9-substituted PCDDs within each homologue group, was found in most clay samples. The ratios of concentrations of PCDD to PCDF and 1,2,3,7,8,9-HxCDD to 1,2,3,6,7,8-HxCDD indicated differences in the profiles found for anthropogenic sources (including pentachlorophenol) and kaolin clays. Concentrations of PCDD/Fs in kaolin clays, except for American ball clays, did not exceed the environmental criteria set by the Law Concerning Special Measures against Dioxins in Japan. Based on the average concentrations measured in our study, inventories of PCDD/Fs from the production/usage of ball clays on a global scale were estimated to be 650 kg/yr; the corresponding value on a TEQ basis is 2400 g-TEQ/yr. More than 480 kg of OCDD is estimated to be released annually from the production of kaolin clays worldwide, suggesting that kaolin clays can be a major contributor for additional source of dioxins, especially OCDD, in the environment.     

Sar1 Affects the Localization of Perilipin 2 to Lipid Droplets

Lipid droplets (LDs) are intracellular organelles that are ubiquitous in many types of cells. The LD core consists of triacylglycerols (TGs) surrounded by a phospholipid monolayer and surface proteins such as perilipin 2 (PLIN2). Although TGs accumulate in the phospholipid bilayer of the endoplasmic reticulum (ER) and subsequently nascent LDs buds from ER, the mechanism by which LD proteins are transported to LD particles is not fully understood. Sar1 is a GTPase known as a regulator of coat protein complex Ⅱ (COPⅡ) vesicle budding, and its role in LD formation was investigated in this study. HuH7 human hepatoma cells were infected with adenoviral particles containing genes coding GFP fused with wild-type Sar1 (Sar1 WT) or a GTPase mutant form (Sar1 H79G). When HuH7 cells were treated with oleic acid, Sar1 WT formed a ring-like structure around the LDs. The transient expression of Sar1 did not significantly alter the levels of TG and PLIN2 in the cells. However, the localization of PLIN2 to the LDs decreased in the cells expressing Sar1 H79G. Furthermore, the effects of Sar1 on PLIN2 localization to the LDs were verified by the suppression of endogenous Sar1 using the short hairpin RNA technique. In conclusion, it was found that Sar1 has some roles in the intracellular distribution of PLIN2 to LDs in liver cells.     

Microfabrication of polytetrafluoroethylene using SR direct etching

Polytetrafluoroethylene (PTFE) is a very attractive material for various fields because of its chemical resistance, insulation properties, and hydrophobic properties. However, it is difficult to fabricate PTFE microstructures with conventional techniques such as semiconductor processes or micromachining. We have succeeded in the fabrication of high‐aspect‐ratio microfluidics parts from PTFE by direct in‐vacuum photo‐etching utilizing synchrotron radiation (SR) at energy levels from 2 to 12 keV. This paper presents an analysis of the mechanisms of the PTFE microfabrication process and describes newly discovered processing characteristics of PTFE. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(4): 49–54, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21152     

Evaluation of Young’s modulus of imprinted hydrogen silsesquioxane pillar after residual layer removal by reactive ion etching

Nanoimprint lithography has two basic steps. The first is the imprint step in which a mold with nanostructures on its surface is pressed into a resin film on a substrate, followed by removal of the mold. The second step is the residual layer removal by a reactive ion etching (RIE). There is no report whether the properties of the imprinted structure after RIE change or not. In this work, the authors evaluated the Young’s modulus of the imprinted pillar after residual layer removal by RIE. In this experiment, hydrogen silsesquioxane (HSQ), a type of spin-on-glass, was used as an imprint material. The residual layer was etched by RIE using CHF₃ gas. The Young’s modulus of imprinted pillar after RIE was measured via cantilever method. The Young’s modulus of HSQ pillar after RIE was twice as much as that of HSQ pillar before RIE. From the Fourier transform infrared measurement, it was founds the chemical structure of HSQ was changed by forming network structure due to heating by RIE plasma energy. These results indicate that the mechanical property of imprinted structure was changed in the residual layer removal step by using RIE.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Development of Sensor and Control Systems of a Wearable Robot to Walk on a Step

The goal of our study is to develop a system for walking on a step using a wearable robot. Our system consists of (1) sensing of a step from the movement of the walker, (2) detection of the foot placement state related to the step, and (3) generation of gait patterns of climbing and stepping down for the step. In the generation of gait patterns for the step, toe trajectories are generated according to the height of the step to avoid collision of the swinging leg with the step. The hip trajectory is generated by an optimization technique that minimizes the sum of the joint angular jerk of the robot subject to constraints on the hip position and the velocity at toe liftoff. Each joint angle trajectory is calculated from the generated trajectories by means of inverse kinematic equations. We investigated the feasibility of the proposed sensor and control systems for two steps with different heights.