Microbial synthesis and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Microbial synthesis of copolymers of [R]-3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), P(3HB-co-4HB), by Alcaligenes eutrophus, Alcaligenes latus, and Comamonas acidovorans from various carbon sources has been studied. The copolyester compositions varied from 0 to 100 mol% 4HB, depending on the microorganism and the combination of carbon substrates supplied. The thermal and physical properties of compositions with 0–100 mol% 4HB were investigated. The copolyesters represented a wide variety of polymeric materials, from hard crystalline plastic to very elastic rubbers, depending on composition. The copolyester films with high 4HB fractions (64–100 mol% 4HB) exhibited the characteristics of a thermoplastic elastomer, and the tensile strength increased from 17 to 104 MPa as the 4HB fraction increased. The enzymatic degradation of P(3HB-co-4HB) films was studied in an aqueous solution of extracellular polyhydroxybutyrate (PHB) depolymerase from Alcaligenes faecalis or lipase from Rhizopus delemer. The erosion rate of P(3HB-co-4HB) films was strongly dependent on the copolymer composition. In addition, environmental degradation of P(3HB-co-4HB) films in sea water was investigated.     

Monitoring cure viscosity of epoxy composite

Viscosity is an important process variable that should be monitored and controlled to ensure the consistent and reliable production of graphite-fiber-reinforced composite parts by the autoclave/vacuum bag process. Unfortunately, no technique is currently known for the direct measurement of viscosity in this process. However, d.c. conductivity and a.c. phase lag appear to correlate quite well with viscosity, and either electrical property may be followed in order to indirectly monitor viscosity. As the method of measuring d.c. conductivity is so inexpensive, simple, and almost free of electrical interference compared to the method of measuring a.c. phase lag, it appears to be the method of first choice for application in an autoclave environment.     

Speciation of selenium in selenium-enriched seeds,buckwheat (<Emphasis Type="Italic">Fagopyrum esculentum</Emphasis> Moench) and quinoa (<Emphasis Type="Italic">Chenopodium quinoa</Emphasis> Willdenow)

Buckwheat (Fagopyrum esculentum Moench) and quinoa (Chenopodium quinoa Willdenow) are widely used as food ingredients. The nutritional characteristics of these plants, i.e., high contents of proteins and amino acids suggest that selenium (Se) is preserved as selenoamino acid derivatives, in particular, selenomethionine (SeMet) in proteins, similar to selenized yeast. Therefore, buckwheat and quinoa are expected to be a good nutritional source of Se. Selenized buckwheat and quinoa were cultivated on Se-fortified soil using sparingly soluble Se salts, such as barium selenate and barium selenite. Se concentration in the edible parts of these plants was determined, and Se extraction efficiency with enzyme or alkali was evaluated. In addition, the chemical species of Se in the low molecular weight fraction of these plants were determined by HPLC-ICP-MS. Total Se concentrations in the edible parts of selenized buckwheat and quinoa were 170.4 ± 2.9 μg/g and 102.7 ± 2.4 μg/g wet weight, respectively. Thus, these selenized seeds were found to be Se accumulators. The results indicate that Se in selenized buckwheat exists mainly as SeMet, while Se in selenized quinoa exists not only as SeMet but also as selenate (Se(VI)) and non-protein forms.     

Synthesis of CeO2-ZrO2 solid solution by glycothermal method and its oxygen release capacity

The glycothermal (GT) reaction of Ce acetate and Zr alkoxide directly yielded CeO₂-ZrO₂ solid solutions in a region of low Ce content ≤40 mol%. Of the CeO₂-ZrO₂ solid solutions obtained by the GT method and subsequent calcination at 500 or 800 °C, the sample with 20 mol% Ce content had the largest BET surface area. This sample exhibited the highest Ce-based oxygen release capacity in the whole Ce/Zr composition range. The oxygen release capacities of CeO₂-ZrO₂ solid solutions synthesized by the GT method were much larger than those of the samples prepared by a coprecipitation (CP) method. The Reitveld analysis and the repetitive reduction-oxidation experiment indicated that the CeO₂-ZrO₂ solid solution synthesized by the GT method has a homogeneous structure as compared with that prepared by the CP method.     

淮河流域1960~2011年干湿时空变化特征

在分析淮河流域26个气象站1960～2011年降水变化的基础上,计算了流域年尺度和季尺度降水距平百分率和标准化降水指数（SPI）,并分析了淮河流域近52年干湿时空变化。结果表明,淮河流域年尺度降水距平与SPI较为一致,季尺度降水距平较SPI变化敏感;干旱多发生于春季,且2000年后发生频次减少;空间尺度上,流域中西部地区有变湿润趋势,东部沿海地区有变干旱趋势,变化趋势呈现近似纵向分带。     

Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion

Severe lattice distortion is a core effect in the design of multiprincipal element alloys with the aim to enhance yield strength, a key indicator in structural engineering. Yet, the yield strength values of medium‐ and high‐entropy alloys investigated so far do not substantially exceed those of conventional alloys owing to the insufficient utilization of lattice distortion. Here it is shown that a simple VCoNi equiatomic medium‐entropy alloy exhibits a near 1 GPa yield strength and good ductility, outperforming conventional solid‐solution alloys. It is demonstrated that a wide fluctuation of the atomic bond distances in such alloys, i.e., severe lattice distortion, improves both yield stress and its sensitivity to grain size. In addition, the dislocation‐mediated plasticity effectively enhances the strength–ductility relationship by generating nanosized dislocation substructures due to massive pinning. The results demonstrate that severe lattice distortion is a key property for identifying extra‐strong materials for structural engineering applications.     

Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Phase-transition temperatures and piezoelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2Li1/2)TiO3-(Bi1/2K1/2)TiO3 lead-free ferroelectric ceramics.

The phase-transition temperatures and piezoelectric properties of x(Bi(1/2)Na(1/2))TiO3-y(Bi(1/2)Li(1/2))TiO3-z(Bi(1/2)K(1/2))TiO3 [x + y + z = 1] (abbreviated as BNLKT100(y)-100(z)) ceramics were investigated. These ceramics were prepared using a conventional ceramic fabrication process. The phase-transition temperatures such as depolarization temperatures T(d), rhombohedraltetragonal phase transition temperature T(R-T), and dielectric-maximum temperature T(m) were determined using electrical measurements such as dielectric and piezoelectric properties. The X-ray powder diffraction patterns of BNLKT100(y)-100(z)) show the morphotropic phase boundary (MPB) between rhombohedral and tetragonal at approximately z = 0.20, and the piezoelectric properties show the maximum at the MPB. The electromechanical coupling factor k(33), piezoelectric constant d(33) and T(d) of BNLKT4-20 and BNLKT8-20 were 0.603, 176 pC/N, and 171 degrees C, and 0.590, 190 pC/N, and 115 degrees C, respectively. In addition, the relationship between d33 and Td of tetragonal side and rhombohedral side for BNLKT4-100z and BNLKT8-100z were presented. Considering both high Td and high d(33), the tetragonal side of BNLKT4-100z is thought to be the superior composition. The d(33) and T(d) of BNLKT4-28 were 135 pC/N and 218 degrees C, respectively. Moreover, this study revealed that the variation of T(d) is related to the variation of lattice distortion such as rhombohedrality 90-alpha and tetragonality c/a.     

Electron beam nanoprocessing of a carbon nanotube film using a variable pressure scanning electron microscope

We demonstrate a novel method of processing carbon nanotubes using a variable pressure scanning electron microscope. Lines were processed in a nanotube film by electron beam irradiation in oxygen gas and nitrogen gas. The processing mechanism can be explained in terms of gas ion sputtering and chemical reaction. In this experiment, the narrowest line width of 120 nm was achieved in a nitrogen atmosphere.