对一类逆变器的数学模型和等效结构图的探讨

本文在特定条件下，通过对阶跃输入下ＦｖＲＯ１５Ｇ７Ｓ－４ＥＸ输出响应特性的分析和实际观测，提出了它的传递函数的数学模型和等效结构图。     

硫酸高铈与对二甲苯反应的动力学研究

本工作测定了不同温度下硫酸高铈与对二甲苯反应的速率常数及表观活化能Ｅａ＝ １１１．５ｋＪ·ｍ ｏｌ－ １。在动力学测定的的基础上确定了此反应的速率方程为ｄ［ＰＴＡＬ］／ｄｔ＝ ｋ［ＰＸ］［Ｃｅ（ＩＶ）］     

利用铜尾矿烧制水泥熟料的技术研究

利用给定铜尾矿在系统分析的基础上,掺加其它一些原料,在实验室烧制高标号水泥熟料。     

误差反向传播算法的数学推导及实现步骤

提供了人工神经网络的一种算法-误差反向传播算法的数学推导方法及上机实现步骤.     

Microstructure evolution during reheating of a Nb-bearing steel I. Metallographic examination

Cooled in water after the isothermal relaxation of deformed austenite for different timea, a Nb-bearing microalloyed steel always exhibits synthetic microstructures of bainitic ferrite, granular bainite and acicular ferrite. When these samples were reheated to and held at 650 or 700℃, the non-equilibrious microstructures tend to evolve into equilibrious ones. The sample relaxed for 60 s displays the highest thermostability, while the microstructure evolution is the quickest in the sample relaxed for 1000 s even though it is the softest before reheating. Softening is not a single process occurring during reheating, in which the hardness fluctuates with time. There are two peaks in the hardness-time curve of each sample having undergone relaxation, while a single peak occurs in the curve of the sample having not been relaxed. Pre-strain accelerates the evolution process. These results indicate that the thermostability of microstructures is determined by their history of formation to a considerable degree.     

秋水仙碱的微分脉冲极谱行为及测定

本文用微分脉冲极谱法研究了秋水仙碱在不同介质和PH值等条件下的电化学行为.找到了以0.6%的四丁基氯化铵为支持电解质,在PH1.81的B.R.缓冲溶液中进行微分脉冲极谱法测定的最佳体系,检出限为6.0×10~(-7)mol/L,峰电流线性范围为9.6×10~(-7)~8.6×10~(-5)mol/L.初步探讨了电极反应机理.应用于秋水仙碱片剂和山慈菇等实际样品分析,可不经分离直接测定,方法简便迅速,测定结果与经典的方法基本一致.     

Al—Zn—Mg—Cu合金的超塑性变形力学行为

介绍了一种新的超塑性处理工艺,采用简单的预处理工艺结合升温拉伸,可以使合金获得优异的超塑性,轧制形变组织在拉伸过程中发生动态再结晶,形成细晶组织并赋予合金优异的超塑性。     

原水浊度与混凝剂最佳投量的匹配

本文在试验的基础上。推导了原水浊度与混凝剂最佳投量之间的关系。得到了潭江水泵用碱式氯化铝作混凝剂时的最佳投量与浊度之间的半经验关系A=1.1C~(0.40)(mg/l)。     

强BZ-代数的特征

将原子及其分支的概念引入ＢＺ－代数，并提出强ＢＺ－代数的概念。深入讨论了它们的性质，得到强ＢＺ－代数的若干特性。