不用专门相移装置的三维面形测量

提出一种不需要专用相移装置实现相移，主要利用数字图像处理技术实现三维面形测量的方法，研究结果表明，用原干涉图像及1幅以上的移值条纹图主可能实现物体三维面形的测量。     

广州市西村水厂生物预处理试验研究

介绍广州市西村水厂生物预处理试验研究,探讨用生物预处理工艺处理西村水厂现有原水的效果。试验结果表明生物预处理对改善西村水厂现有水源水质效果显著,"生物预处理 常规处理"后的最终出水的考察项目全部符合《生活饮用水卫生标准》。指出实施生物预处理工艺与西江引水工程相衔接,完全可以保障西村水厂的供水水质。     

HRB400月牙型螺纹钢筋试制

本文详细介绍了包钢采用平炉冶炼工艺试制HRB400钢筋的生产过程和检验结果，对试制中出现的问题提出了改进措施，并初步研究了稀土对HRB400钢筋质量与性能的影响。结果表明，采用平炉冶炼工艺可生产出符合GBl499—1988的HRB400钢筋。本次试验研究尚未看出稀土对HRB400钢筋的质量与性能产生明显影响。     

生烃化学动力学在川东北普光气田的应用

普光气田是四川盆地近期发现的规模最大、埋藏最深、资源丰度最高的气田。通过认识普光气田各个烃源岩层的贡献量、生烃关键期与构造演化的关系、油气成藏具体模式等，建立生烃化学动力学模型、标定参数，结合地区烃源岩参数和地史、热史资料，定量描述该地区的生烃过程及油裂解成气过程。认为：普光地区的主力烃源岩为下志留统泥岩；主要干酪根生油期为早二叠世末到早三叠世末期（距今286Ma至240Ma）；主要干酪根生气期为中三叠世（距今240Ma至230Ma）；主要气源是原油后期热裂解气，原油裂解成气的时间比较晚，主要油裂解成气期为早白垩世（距今144Ma至97．5Ma），从而决定了普光气田的成藏模式为“多期成藏，油气转化，晚期定位”。图2表3参33     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

新型清洁压裂液的实验室合成

研制出一种新型的双子季铵盐表面活性剂———N,N-双十八烷基-N,N,N,N-四醇乙基-二溴乙二铵(Gemini-OHAB),对用Gemini-OHAB及其它辅剂配制的新型压裂液体系性能进行了研究。结果表明:该体系具有良好的粘弹性、悬砂性能、低温溶解性以及抗温稳定性能;而且由于双子季铵盐表面活性剂中引入了醇乙基,该新型压裂液体系解决了传统季铵盐类清洁压裂液体系的低温不溶性及高生物毒性,也克服了甜菜碱类清洁压裂液体系抗温性能低的缺点,具有良好的市场应用前景。     

发展可再生能源

本文阐述了发展可再生能源重要性、原因与动力,世界各国概况与我国现况和存在的问题,我国具备规模化发展可再生能源的条件,发展规划和提出几点建议,供参考。