基于可靠性评价的含缺陷核压力管道疲劳寿命预测方法

含缺陷压力管道经缺陷评定合乎使用后,其疲劳寿命的估计具有重要的工程意义。将整个含缺陷压力管道作为一个整体,分析了含缺陷压力管道的疲劳裂纹扩展特点,提出了相应的含缺陷压力管道疲劳寿命的计算过程,并在基于可靠性评价的基础上,给出了核压力管道的可接受失效概率,最终得到了含缺陷核压力管道疲劳寿命预测方法。     

锂离子电池用聚合物电解质的最新进展II.含液聚合物电解质

由于干态聚合物电解质目前还不能满足聚合物锂离子电池的应用要求,人们致力于开发含液体增塑剂的聚合物电解质,包括凝胶型和微孔型两类体系。本文综述了含液聚合物电解质的最新进展,重点论述了各种新体系和新方法。     

SrTiO3基压敏电阻的研究及其在武器系统中的应用

电子设备的广泛使用带来的设备干扰及浪涌冲击等问题使人们开始关注SrTiO3基压敏电阻器件材料的开发.本文介绍了SrTiO3基压敏电阻的一般制造配方和工艺流程.和ZnO基压敏电阻相比,此材料在低压领域具有更优良的电气性能,如较大的电容量(C=10～150nF);在高于电压临界值又具有较低压敏电压;非线性系数在5～43之间可调;耐浪涌能量大;并且具有自复位特性.这些特性使得它具有高频噪声吸收、前沿快速上升型脉冲噪声吸收和浪涌吸收等功能.针对武器系统的高性能要求,本文提出了SrTiO3基压敏电阻在直流电机消噪、电源输入端、吸收电感性负载开关浪涌、旁路电容器、通信线路防护、防止电涌冲击等方面的应用.     

嵌入式操作系统在HDTV机顶盒中的应用

介绍一个高清晰度电视机顶盒方案中软件系统的系统结构，阐述了机顶盒软件中使用的嵌入式操作系统STLite/OS20的原理及其特点，并举例说明了这个嵌入式操作系统在机顶盒系统中的使用。     

阴,阳离子聚合物地层内凝胶化改善水驱效果的研究

研究了一杆阴离子聚合物（Ａｃ５３０）和一种阳离子聚合物（Ｍｂ５８１）在水溶液中形成凝胶的条件和过程、凝胶化学结构、形态、稳定性和力学性能。在模拟地层的二维微观模型内观测了两种聚合物驱替渗流、相逼、形成凝胶、凝胶封堵大孔道的机理。在亲水填砂模型内测定了阴、阳离子聚合物凝胶体系降低渗透率的能力。     

HNO3和有机介质中U（Ⅳ）的稳定性研究

研究了ＨＮＯ＿３和ＴＢＰ－煤油介质中Ｕ（Ⅳ）的稳定性。测定了两种介质中Ｕ（Ⅳ）、ＨＮＯ＿３、ＴＢＰ浓度和气相中氧浓度对Ｕ（Ⅳ）氧化速率的影响。Ｕ（Ⅳ）的氧化速率都随温度提高而明显增加．其表观活化能分别为９１ｋＪ／ｍｏｌ（ＨＮＯ＿３介质）和４２ｋＪ／ｍｏｌ（ＴＢＰ－煤油介质）。对两种介质中Ｕ（Ⅳ）的氧化速率规律进行了比较。     

On the corrosion fatigue crack initiation model and expression of metallic notched elements

In the present study, attempts are made to extend the application of the mechanical model for the fatigue crack initiation (FCI) and the FCI life formula of metallic notched elements in laboratory air to those in the corrosive environment. The test results and analysis of the corrosion FCI (CFCI) life of aluminum alloys and Ti---6A1---4V show that the expression of the CFCI life obtained by modifying the FCI life formula in laboratory air can give a good fit to the test results of the CFCI life. The salt water (3.5% NaCl) environment has no effects on the CFCI resistant coefficient compared with the FCI resistant coefficient in laboratory air. However, 3.5% NaCl environment greatly decreases the CFCI threshold of aluminum alloy, but has little effect on the CFCI threshold of Ti---6A1---4V. The loading frequency ranging from 1 Hz to 10 Hz has no appreciable effect on the CFCI life, and thus, the CFCI threshold of aluminum alloys investigated. Hence, the expression for the CFCI life of metallic notched elements proposed in this study is a better one, which reveals a correlation between the CFCI life and the governing parameters, such as, the geometry of the notched elements, the nominal stress range, the stress ratio, the tensile properties and the CFCI threshold. However, this new expression of the CFCI life needs to be verified by more test results.     

Control of peak sidelobe level in adaptive arrays

Adaptive beamforming techniques are now widely used to reject interference (jammer/clutter) signals in radar, communication, and sonar applications. In adaptive arrays using the sample matrix inversion (SMI) algorithm, inadequate estimation of the covariance matrix results in adaptive antenna patterns with high sidelobes and distorted mainbeams. In this paper, a method is proposed to precisely control the peak (rather than average) sidelobe level of adaptive array patterns. The proposed method is also generalized to adaptive array antennas with moderate bandwidth and large random amplitude and phase errors. Theoretical analysis and simulation results are provided to illustrate the performance of the method proposed     

参数化图形库技术

本文论述了参数化图形库的实现原理，建立了以尺寸叠加算法为基础的参数化图形库开发工具，利用这种开发工具建立的图形数据可以由数据库管理，方便有效。     

新型实用布线算法──L─M算法

本文提出新型布线算法，集李氏迷宫法与线搜索法的长处为一体，以饱和带法进行动态排序，以线搜索法确定借孔位置，然后用李氏法进行单层布线，获得最佳路径，从而达到线型好，布通率高的效果。