Effect of chromium addition on microstructure, tensile properties and creep resistance of as-cast Ti-48Al alloy

The effect of Cr on the microstructure, tensile properties and creep resistance of as-cast Ti–48Al–xCr (x = 0, 2, 4 at.%) alloys were studied. The dependence of the tensile properties and creep resistance of as-cast TiAl on the solid solution strengthening and formation of β phase due to addition of Cr was investigated.     

Technoeconomic analysis of an integrated microalgae photobioreactor, biodiesel and biogas production facility

As fossil fuel prices increase and environmental concerns gain prominence, the development of alternative fuels from biomass has become more important. Biodiesel produced from microalgae is becoming an attractive alternative to share the role of petroleum. Currently it appears that the production of microalgal biodiesel is not economically viable in current environment because it costs more than conventional fuels. Therefore, a new concept is introduced in this article as an option to reduce the total production cost of microalgal biodiesel. The integration of biodiesel production system with methane production via anaerobic digestion is proved in improving the economics and sustainability of overall biodiesel stages. Anaerobic digestion of microalgae produces methane and further be converted to generate electricity. The generated electricity can surrogate the consumption of energy that require in microalgal cultivation, dewatering, extraction and transesterification process. From theoretical calculations, the electricity generated from methane is able to power all of the biodiesel production stages and will substantially reduce the cost of biodiesel production (33% reduction). The carbon emissions of biodiesel production systems are also reduced by approximately 75% when utilizing biogas electricity compared to when the electricity is otherwise purchased from the Victorian grid. The overall findings from this study indicate that the approach of digesting microalgal waste to produce biogas will make the production of biodiesel from algae more viable by reducing the overall cost of production per unit of biodiesel and hence enable biodiesel to be more competitive with existing fuels.     

Resonance condition of a microfiber knot resonator immersed in liquids

Effects of immersing a microfiber knot resonator (MKR) in liquid solutions that have refractive indices close to that of silica are experimentally demonstrated and theoretically analyzed. Significant improvement in resonance extinction ratio within 2 to 10 dB was observed. To achieve a better understanding, a qualitative analysis of the coupling ratio and round-trip attenuation of the MKR is performed by using a curve-fitting method. It was observed that the coupling coefficient at the knot region increased when immersed in liquids. However, depending on the initial state of the coupling and the quantity of the increment in the coupling coefficient when immersed in a liquid, it is possible that the MKR may experience a deficit in the coupling parameter due to the sinusoidal relationship with the coupling coefficient.     

Future criteria for success of building projects in Malaysia

Several success criteria (SC) and categorization models have been introduced and studied in the previous decades to address the issue of project success. However, most of these models have failed to align success criteria with company's success in the long-term. This paper aims at proposing a framework to categorize project success for building projects in Malaysia from the contractors' perspective. The proposed framework incorporates criteria that align the project efforts with both short and long-term goals of the companies; moreover provide an appropriate judgment of success at all stages of the project. If construction managers can judge the probability of success, they would be able to evaluate the overall relative strength of each project, and identify problems on current projects to direct them toward success.Based on the available literature, thirteen success criteria were found to be significantly and substantially related to building projects success. To develop the SC categorization framework, 151 participants, who are involved in building construction, were invited through a postal and e-mails survey to generate priorities of these criteria. The results of this study indicated that a categorization scheme for success criteria for building projects should include the categories of project management success, product success, along with market success. The findings of this study can further help future researchers seeking solutions in the challenges relating to improvement of building projects implementation and enhancement of project success.     

ASE spectral slice gain-clamping of EDFA

An erbium-doped (Er-doped) fiber amplifier operating in the C-band is gain clamped, at about 26 dB with noise figures below 6 dB by multiple fiber Bragg gratings. These gratings are placed at the amplifier output with center wavelengths in between communication channels so that unwanted amplified spontaneous emission is removed but put to good use. A 0.5-dB gain compression point at -15 dBm of input signal powers for two simultaneous signal channels is also demonstrated.     

Double-pass L-band EDFA with enhanced noise figure characteristics

A new double-pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated by adding a short length of forward pumped erbium-doped fiber (EDF) in front of a double-pass amplifier. Compared with the conventional double-pass amplifier, the new amplifier provides noise figure improvement of about 0.8 to 6.0 dB over the flat-gain region from 1568 to 1600 nm. Since the optical circulator prevents the amplified signal and backward amplified spontaneous emission from propagating into the EDF, the population inversion of the input part of the amplifier is hardly affected by the intense lights, therefore, the noise figure could be kept low. The new double-pass system has achieved a flat-gain output at about 33.5 dB, which is 13.5 dB higher than that of the single-pass system with gain variation less than 1.3 dB at the flat-gain region. The noise figure varies from 5.9 to 6.6 dB in this region.     

Latex-coated polymeric monolithic ion-exchange stationary phases. 1. Anion-exchange capillary electrochromatography and in-line sample preconcentration in capillary electrophoresis

A sulfonated methacrylate monolithic polymer has been synthesized inside fused-silica capillaries of diameters 50-533-microm i.d. and coated with 65-nm-diameter fully functionalized quaternary ammonium latex particles (AS18, Dionex Corp.) to form an anion-exchange stationary phase. This stationary phase was used for ion-exchange capillary electrochromatography of inorganic anions in a 75-microm-i.d. capillary with Tris/perchlorate electrolyte and direct UV detection at 195 nm. Seven inorganic anions (bromide, nitrate, iodide, iodate, bromate, thiocyanate, chromate) could be separated over a period of 90 s, and the elution order indicated that both ion exchange and electrophoresis contributed to the separation mechanism. Separation efficiencies of up to 1.66 x 10(5) plates m(-1) were achieved, and the monoliths were stable under pressures of up to 62 MPa. Another latex-coated monolith in a 250-microm-i.d. capillary was used for in-line preconcentration by coupling it to a separation capillary in which the EOF had been reversed using a coating of either a cationic polymer or cationic latex particles. Several capillary volumes of sample were loaded onto the preconcentration monolith, and the analytes (inorganic anions) were then eluted from the monolith with a transient isotachophoretic gradient before being separated by electrophoresis in the separation capillary. Linear calibration curves were obtained for aqueous mixtures of bromide, nitrite, nitrate, and iodide. Recoveries of all analytes except iodide were reduced significantly when the sample matrix contained high levels of chloride. The preconcentration method was applied to the determination of iodide in open ocean water and provided a limit of detection of 75 pM (9.5 ng/L) calculated at a signal-to-noise ratio of 3. The relative standard deviation for migration time and peak area for iodide were 1.1 and 2.7%, respectively (n = 6). Iodide was eluted as an efficient peak, yielding a separation efficiency of 5.13 x 10(7) plates m(-1). This focusing was reproducible for repeated analyses of seawater.     

Effects of parameter changes on the structure and properties of low‐density polyethylene foam

Several parameters, such as crosslinking agent concentration, blowing agent concentration, and temperature, were varied to evaluate their effects on the structure and mechanical properties of low‐density polyethylene (LDPE) foams. Dicumyl peroxide (DCP) was used as crosslinking agent, while azodicarbonamide (ADC) was utilized as the blowing agent at different levels. The formulations were prepared by using a thermostatically controlled heated two‐roll mill and foamed by using a compression molding technique via a single‐stage foaming process at three foaming temperatures (165, 175, and 185°C). The resultant LDPE foams were characterized and found to have a closed cell structure. The density and gel content increased proportionally with crosslinking level, whereas density decreased when ADC level and foaming temperature were increased. Another characteristic evaluated was the foam cell size decreased when the crosslinking level and foaming temperature were increased. In contrast, increasing the ADC concentration only gave a maximum cell size increase up to 6 phr that decreased when 8 phr of ADC was used. Results also indicated that compression stress increased proportionally with DCP level and decreased when ADC concentration and foaming temperature were increased. Impact studies on the prepared foams showed that their ability to absorb impact energy decreased with increasing crosslinking level, foaming temperature, and blowing agent concentration. J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers     

Evaluation of Polycyclic Aromatic Hydrocarbons Contamination in the Sediments of the Johor Strait,Peninsular Malaysia

In May 2013, sediment samples were collected from five stations in the Straits of Johor, near the southern tip of Peninsular Malaysia, in order to evaluate the distribution and sources of polycyclic aromatic hydrocarbons (PAHs). The concentrations of 16 United States Environmental Protection Agency PAHs varied from 650.5 to 1441.2 ng g ^?1 dry weight (dw) with a mean value of 985.5 ng g ^?1 dw. PAHs can be classified as moderate level pollution in the collected samples. When comparing PAHs in this study with that of the sediment quality guidelines (SQGs), it was found that the total PAHs, low molecular weight (LMW), and high molecular weight (HMW) PAHs might incur minimal adverse biological effects. The diagnostic ratios of individual PAHs indicated both petrogenic and pyrogenic origins with predominantly pyrogenic sources, the findings of which are further supported by the results from principal component analysis (PCA). The PCA results reveal contributions of 44.44%, 32.3%, and 18.96% for traffic-related, coal combustion, and petroleum-related products, respectively. These findings indicate that the effective monitoring and significant improvement resulting from the implementation of environmental regulations in Malaysia might have caused a shift in the source of petroleum hydrocarbons in the Straits of Johor's aquatic ecosystems from petrogenic to pyrogenic origins.