向日葵壳水解-氧化-水解法制取草酸新工艺研究

研究了以植物纤维向日葵壳为原料，采用水解-氧化-水解法制取草酸（乙二酸）的新工艺。与用同类原料，其他方法制草酸相比，本工艺在提高产率，降低生产成本以及易于业化方面有很大突破。在H2SO4质量分数为70%，原料浸泡时间3h以上，m(HNO3):m（向日葵壳）=方面有很大突破，在H2SO4质量分数为70%，原料浸泡时间3h以上，m(HNO3):m(向日葵壳）=2.1:1.0；氧化-水解反应时间5h，反应温度65-70℃的条件下，草酸二水合物收率可达78.5%。     

二钼酸铵(ADM)非团聚晶体的生成试验

探讨了二钼酸铵非团聚晶体生成的机理及制取新工艺。采取该工艺制取的ADM费氏粒度（Fsss)约30μm，激光粒度分布d0.5为370μm，松装比达1.37/cm^3。     

Antiferroelectric lead zirconate thin films derived from acetate precursors

Antiferroelectric lead zirconate (PbZrO₃) films derived from acetate precursors have been fabricated on Pt/Ti-coated silicon wafers and fused silica at 700 °C with an automatic dip-coating process. Films formed directly on the metallized silicon wafer showed the coexistence of perovskite and pyrochlore phases. A pre-coated titania layer of about 10 nm facilitated the formation of the desired perovskite phase. Films deposited on fused silica exhibited interactions between lead and silica which inhibited the crystallization of the films. In this case, a pre-coated titania layer in the range 50–75 nm acted as a diffusion barrier layer, allowing the formation of the perovskite phase. Antiferroelectricity in the films was confirmed by X-ray superstructure, dielectric double hysteresis loops and d.c. bias behaviour at room temperature. The corresponding transverse electro-optic properties were also measured for films deposited on fused silica.     

无约束淬火机目标温度神经网络预报

淬火、控制冷却的冷却速度和目标温度是关系到钢板性能的关键因素 ,但由于冷却过程的水量、水温、辊道速度等对冷却目标温度的影响属多变量非线性过程 ,用简单的解析模型通常精度较低 ,难以达到精确控制的要求。采用人工神经网络技术对无约束淬火机目标温度进行快速预报 ,结果表明 ,预测精度高 ,快速准确     

影响凹印铜金粉印金光泽度的主要因素

在研究国内外铜金粉的微观形貌、厚度、水面遮盖率、定向排列、光泽度和粒度分布的基础上，分析了影响凹印铜金粉印金光泽度的主要因素。结果表明，国产铜金粉颗粒级差大、细小颗粒所占比例过多、金属片太厚、水面遮盖率小、定向排列不好等是影响国产铜金粉印金光泽度的主要因素。     

Fuzzy-Fusion Classifier for MMV Full-Polarization Radar Target Recognition Using One-Dimensional Scattering Centers

One-dimensional (1-D) scattering centers on a target can be used for radar target recognition purpose. In this paper, a new classifier based on fuzzy techniques is proposed, which is very much suitable for target recognition using 1-D scattering centers. Furthermore, information fusion techniques for full polarimetric receiver data are utilized at the decision level. The performance of the proposed fuzzy-fusion classifier is evaluated using a dataset of five aircraft models measured by millimeter-wave (MMW) full-polarization stepped-frequency radar in the compact range facility.     

一种新型微处理器功能验证

文中介绍一种新型微处理器的验证方法，并对相关的一些验证策略进行深入的讨论。     

基于虚拟仪器功率测试分析系统

介绍基于虚拟仪器的功率测试分析系统的构成，软件设计以及数据采集、信号处理和整体结构。该系统已在实际应用中取得很好效果。     

热解样品分析中重量的变化及其影响

热解除油是目前室内岩心分析中样品除油的主要方法之一，但由于热解温度较高，会对样品中粘土矿物的结构水和层间水产生较大的影响。本文结合粘土矿物的吸水特性，通过对大量的实验测定结果分析后认为：经过热解处理后的样品，在测定过程中受粘土矿物（主要是伊利石和蒙脱石）层间水变化的影响，会引起样品重量及样品孔隙空间体积的变化，从而对物性分析中孔隙度测定结果产生较大的影响。     

Experimental evaluation of the strength distribution of E-glass fibres at high strain rates

A bimodal Weibull distribution function was applied to analyse the strength distribution of glass fibre bundles under tensile impact. The simulation was performed using a one-dimensional damage constitutive model. The results show that there were two concurrent flaw populations in the fracture process. The regression analysis using the bimodal Weibull distribution function was in good agreement with experiment.