微型集散系统通用过程控制软件包

本文给出一种新的基于ＭＣＳ－５１单片机集散系统通用过程控制软件包的设计原理及其实施方法。文中重点地阐述了微型集散系统的构在民，通用过程控制软件的自动生成，主要数据结构与程序结构，实现方法及关键技术等。本软件包是采用ＴＵＲＢＯＣ２．０版本和ＭＣＳ－５１泄编语言编程的，并通过了ＭＣＳ－５１组合软件的编译，形成了可用的目标码程序系统。     

线性二次型系统结构控制的研究

本文提出线性系统的结构控制问题，并针对定常线性二次型系统加以研究，得到有关最优控制结构和。最优控制结构的设计方法。     

同心球所夹空间电场的电像法求解

采用电像法分析研究了二同心导体球所夹空间的静电场分布。     

快速启动微型J—T制冷器

在一些特殊应用中，要求把红外探测器必须在几秒钟或更短的时间内冷却到工作状态。微型Ｊ－Ｔ式制冷是常用致冷方式。本文介绍了快速启动冷却红外探测器的Ｊ－Ｔ制冷器的设计及达到快速冷却的方法以及测试结果。     

Electron transfer by domain movement in cytochrome bc1

The cytochrome bc1 is one of the three major respiratory enzyme complexes residing in the inner mitochondrial membrane. Cytochrome bc1 transfers electrons from ubiquinol to cytochrome c and uses the energy thus released to form an electrochemical gradient across the inner membrane. Our X-ray crystal structures of the complex from chicken, cow and rabbit in both the presence and absence of inhibitors of quinone oxidation, reveal two different locations for the extrinsic domain of one component of the enzyme, an iron-sulphur protein. One location is close enough to the supposed quinol oxidation site to allow reduction of the Fe-S protein by ubiquinol. The other site is close enough to cytochrome c1 to allow oxidation of the Fe-S protein by the cytochrome. As neither location will allow both reactions to proceed at a suitable rate, the reaction mechanism must involve movement of the extrinsic domain of the Fe-S component in order to shuttle electrons from ubiquinol to cytochrome c1. Such a mechanism has not previously been observed in redox protein complexes.     

X-ray Photoelectron Spectroscopy Investigation on the Low-Temperature Degradation of 2 mol% Y2O3-ZrO2 Ceramics

2 mol% Y₂O₃-ZrO₂ polycrystals were annealed in water and under vacuum to highlight the effect of the presence of H₂O on the low-temperature degradation transformation. The specimen surfaces with monoclinic phases transformed during annealing in the different environments were analyzed by X-ray photoelectron spectroscopy with special interest on the electron binding energy change of the constituent ions of the 2 mol% Y₂O₃-ZrO₂ ceramics after the degradation transformation. It was found that no change occurred for the electron-bonding energies of core levels of zirconium ions after the transformation, whereas Y-OH bonds were formed during annealing in water. This result suggested a possibility that the preferred hydration of yttrium took place at the surface of Y₂O₃-partially-stabilized ZrO₂, which is likely to be the reason for the low-temperature degradation accelerated by the presence of H₂O.     

一种弧焊机器人实时激光扫描视觉系统

研制了一种小型高精度弧焊机器人实时激光扫描视觉系统，对其各项性能进行了测试，并进行了抗电弧光干扰试验，结果表明，此系统精度高，抗干扰能力强，检测范围宽，能广泛地应秀于机器人和自动化焊接中。     

The effect of prior austenite grain size on the transformation behaviour of C-Mn-Ni weld metal

The influence of prior austenite grain size on the transformation behaviour and microstructural development of C-Mn-Ni weld metals was investigated. It was found that increasing the grain size depressed the start temperature of grain-boundary ferrite and slightly increased the acicular ferrite start temperature. The microstructural products also changed from a boundary-dominated effect in the small grain sizes, to an intragranular-dominated effect in the large grain sizes, and at the same time, the morphology of the acicular ferrite was seen to change to a larger aspect ratio.     

New method for analysis of electromagnetic coupling to an angled two-strip transmission line

The electromagnetic coupling to an angled two-strip transmission line is analysed to constructing an angled two-plate transmission line equivalent to the original geometry, and then solving the cylindrical transmission line equations of the original source analytically. The results agree with the numerical values of the circuit-concept approach.<>     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。