Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

智能小区中的网络和布线设计解决方案——智能建筑学术讨论系列文章之七

当前小区信息网络建设中存在多种实施方案。笔者分析比较了常用的几种典型方案的优劣。讨论了目前建设中的一些解决方法，提出了兼顾现状，适度超前的设计实施原则。     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

Access-mode predictions for low-power cache design

An access-mode prediction technique based on cache hit and miss speculation for cache design-achieves minimal energy consumption. Using this method, cache accesses can be adaptively switched between the way-prediction and the phased accessing modes.     

标准椅全身计数器对不同年龄组均匀体模源全能峰效率的刻度

本文介绍了用标准液体源均匀充入聚氯乙烯制的体模,刻度标准椅全身计数器〔φ8″×4″(NaI)〕的方法和结果。分别就代表6个年龄组的体模,测定了标准椅全身计数器对5种能量(364,637,898,1460和1836keV)γ射线的全能峰效率;给出了全能峰效率与γ射线能量和被测对象体重的关系曲线。