射流流化床内流体力学行为的模拟研究

以流化床应用为代表的气固流动系统是许多化工过程中的重要组成部分 ,CFD( computational fluid dynamics)方法能够为其优化设计和放大提供所需要的信息 .本文采用双欧拉模型 ,与 Gidaspow等的实验结果进行了对比 ,模拟了二维射流流化床内气泡的形成规律 ,得到了带锥型分布器的流化床内瞬时空隙率和气固相速度分布等流体力学参数 .对锥型分布器流化床的实验结果表明 ,模拟得到的气泡的形状与实验现象相接近 .     

对煤磨MDC89-7袋式除尘器的节能环保改造

0 前言 湖南韶峰水泥集团有限公司规格为φ2.5 m×3.9 m的风扫式煤磨配套的MDC89-7袋式除尘器于1993年投用,经十多年的生产应用,其导流板及风道损坏达80%左右;外壳、主风道因烧袋和腐蚀,严重变形且花板变得很薄;反吹风道变形穿孔,提升阀密封不严,导致清灰时风量流失严重,运行阻力增加,系统产量降低,且系统中含氧量增加,带来安全隐患;除尘效率下降、污染严重,粉尘排放浓度高达1 g/m3;系统能耗高,且维修强度大(每个滤袋重50kg,每次换袋需12人)且费用高.为此,该公司于2004年4月对该煤磨除尘器进行技术改造,取得了明显的效果.     

Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054     

以显微荧光检验法检测常用盖印材料

显微荧光检验法是显微检验的一个重要角度,由于缺少基础性研究,这一方法在文件检验中的运用并不广泛.着重考虑曝光时间这一因素,以盖印材料的荧光特性为观察角度,运用显微荧光检验法对大量常用盖印材料进行系统、全面的观察和研究.研究表明,绝大部分盖印材料可被激发出荧光,每种盖印材料的荧光特性都有各自的规律性特点.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

英汉情感隐喻的共性与差异

为进一步了解情感隐喻的实质,以人类基本情感的隐喻表达作讨论对象,对英汉语言中的基本情感隐喻进行共性与差异分析。     

VR技术对地下步行商业街心理环境辅助设计初探

文章力图以VR（虚拟现实）技术手段应用于城市地下步行商业街规划设计,来解决当前传统规划手段地下步行商业街规划中普遍存在的对其心理环境构筑的忽视和考虑不完善的诟病,以期最大限度消除规划设计中消极空间的产生,并对其关键技术进行了研究和探讨     

无线射频识别技术（RFID）及其在物联网中的应用

随着物联网知识的普及,以及其技术的广泛推广应用,物联网被越来越多的人所关注。本文介绍了物联网及其关键技术RFID,并结合RFID在物联网的实际应用,并对其未来的发展作出了展望。     

Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material

A new type of high temperature energy storage material was obtained through the melt infiltration method, using compounding SiC ceramic foam as matrix and Na₂SO₄ as phase change material. The resulting composite material was measured by XRD, SEM, TG-DSC methods. The experimental results indicate that the composite is composed of silicon carbide, sodium sulfate and square quartz, and no chemical reactions occurs between Na₂SO₄ and SiC matrix. Na₂SO₄ has a good bonding with the SiC ceramic foam matrix. As the composite material is characterized by high thermal energy storage density and high thermal conductivity, it is suit for energy storage under high temperature. Funded by the “863” Hi-Tech Research and Development Program of China (2008AA05Z418)