Clustering feature decision trees for semi-supervised classification from high-speed data streams

Most stream data classification algorithms apply the supervised learning strategy which requires massive labeled data.Such approaches are impractical since labeled data are usually hard to obtain in re...     

合金元素对TRIP钢连续冷却固态相变和硬度的影响

为了研究Al和P合金元素在TRIP钢固态相变过程中的重要作用,利用热膨胀实验、金相观察、显微硬度测量等方法绘制了4种不同Al和P含量的C-Mn-Al-P TRIP钢的CCT图.结果表明,Al元素强烈缩小奥氏体相区,提高Ac3与Ms,促使CCT图左移和上移.P元素能够阻碍碳化物的生成,当钢中w(P)达到0.14%时,能显著将CCT曲线图中的珠光体区与贝氏体区右移.P元素对先共析铁素体相变和马氏体相变没有显著影响.随着冷却速率的增加,材料的显微硬度增加.对于每一种成分超过其临界冷却速率时将得到完全的马氏体组织.添加固溶强化元素可以强化铁素体基体,增加铁素体基体的硬度,P元素固溶强化能力最强,Mn元素稍弱,Al元素很弱.     

Effect of Nanophase on the Nucleation of Intragranular Ferrite in Microalloyed Steel

MnS, MnS+V(C, N) complex precipitates in micro-alloyed ultra-fine grained steels were precisely analyzed to investigate the grain refining mechanism. The experimental results shows that MnS, MnS+V(C, N) precipitates provide nucleation center for Intra-granular ferrite (IGF), so that refined grain remarkably. Moreover, substructures such as grain boundary, sub-boundary, distortion band, dislocation and dislocation cell in austenite increased as the deformation energy led by heavy deformation at low temperatu...     

烧结气氛对Al2O3/SiC纳米复合陶瓷显微组织的影响

为了提高氧化铝陶瓷的抗热震性,将具有热导率高、热膨胀系数低的SiC加入到Al₂O₃中,通过无压烧结工艺,在有气氛保护和无气氛保护条件下分别制备出氧化铝基抗热震陶瓷.采用扫描电子显微镜（SEM）对陶瓷进行组织结构分析,结果表明：在气氛保护条件下烧结的 Al₂O₃/SiC〖JP〗复相陶瓷气孔比无气氛条件下烧结的明显减少,复相陶瓷基体内部气孔显著降低.这样的显微组织有利于缓解热应力和提高强度,对提高陶瓷的抗热震性具有重要的作用.     

Preparation and enhanced daylight-induced photo-catalytic activity of transparent C-Doped TiO<Subscript>2</Subscript> thin films

The transparent C-doped TiO₂ nanostructure films were fabricated on the silicate glass substrates by sol-gel spin-coated method. The as-prepared films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible absorption spectra (UV-vis) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated via the photo-catalytic oxidation of methylene blue in aqueous under daylight irradiation at room temperature. The results show that the daylight-induced photocatalytic activities of the as-prepared films are improved by the C-doping. The calcination temperatures significantly affect the morphology, microstructure and photocatalytic activity of the as-prepared samples. At 723 K, the C-doped TiO₂ films exhibit the highest photocatalytic activity due to the synergetic effects of good crystallization, appropriate oxygen vacancies and strong absorption in the near UV and visible-light region.     

自适应的三维分形地形重建算法研究*

针对常规三维分形地形重建算法具有的速度慢、插值点分布不均匀、参数设置复杂等缺点,提出自适应的三维分形地形重建算法。该算法根据地形的起伏特征自动确定垂直压缩因子,根据子域面积进行均匀插值。实验结果表明,该方法插值效率更高,所获得的插值曲面更加真实,与常规分形插值相比具有一定的优越性。     

Research on indoor experimentation of range SAL imaging system

By means of advantages of both SAR and lidar, the combination of the techniques of (inverse) synthetic aperture and lidar makes it possible to obtain high resolution 2-D image. In this paper, an indoor experimental system of inverse synthetic aperture lidar imaging is given and a processing approach is presented. The given system is in the mode of lidar system with separated receiver and transmitter, which can effectively eliminate the jamming from the lens or/and the intersection between two optic fibers. ...     

3-甲硫基-1-丙醇的合成研究

研究了以 3 氯 1 丙醇和甲硫醇钠为原料 ,在相转移催化剂四甲基溴化铵的作用下 ,在 0℃下反应 1h ,然后升温至 30℃ ,并在此温度下反应 0 .5h ,合成了 3 甲硫基 1 丙醇 ,并用气相色谱、红外光谱和气质联用对其结构进行了确定。该方法工艺简单 ,条件温和 ,反应时间短 ,易于工业化 ,环境污染少 ,也适应于合成其他甲硫基化合物。     

级联多电平逆变器载波移相调制法的优化研究

针对传统级联高压变频器载波移相调制方法存在开关损耗大、直流电压利用率低等问题,及载波移相与矢量控制相结合的调制方法存在计算量大、计算繁琐、不易实现的问题,提出了级联多电平逆变器的优化控制方法——调制信号叠加零序分量法和两相控制法。该方法采用基于控制自由度组合的思想,通过向调制波中注入零序分量、直流分量等自由度来提高直流电压利用率、减小开关损耗。仿真结果验证了该方法的可行性。     

SARS灭活疫苗的研制及其质量控制

目的研究适合SARS病毒灭活疫苗的生产工艺及其质量控制。方法连续制备3批疫苗,按拟定规程进行疫苗原液和疫苗各项指标检测。结果各项检测指标均符合拟定规程规定。结论我所生产的SARS灭活疫苗工艺稳定,质量可控。