中小型变压器供电电机起动方式的选择

通过分析和计算及实例，从允许电压降范围和电动机母线电压校验两方面叙述了电动机起动时如何合理地选择起动的方式。     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

An experimental study of pathomorphology in the iris and ciliary body after intraocular lens implantation]

Recent studies have suggested that cytokines play a critical role in the pathophysiology of alopecia areata; however, no information is available regarding the difference in cytokine profiles in these patients. Serum levels of cytokines, including interferon gamma (IFN-gamma), tumor necrosis factor alpha, interleukin 1 alpha (IL-1 alpha), IL-2, IL-4, and IL-6, were measured using radioimmunoassay or enzyme-linked immunosorbent assay techniques in patients with the localized form and the extensive form (alopecia universalis). The serum levels of IL-1 alpha and IL-4 were significantly elevated in patients with the localized form. In contrast, the serum levels of IFN-gamma and IL-2 were significantly elevated in patients with the extensive form. These results indicate that immune responses in the localized form and the extensive form of alopecia areata are regulated by Th2 cytokines and Th1 cytokines, respectively.     

�;��ȶ�����״̬�µ������Ծ���������

本文提出了油井稳定生产状态下的脉冲试井数学模型,利用时间和空间叠加原理求得其解析解。并用非线性回归分析方法来进行脉冲试井分析。     

Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

双相位编码在数据通信中的应用

双相位码是数据串行通信和记录中使用的一种编码方法。在集散控制系统中使用的磁带机和飞行数据记录器中得到广泛应用。本文主要介绍双相位码的编码、译码原理及双相位码的特点;重点论述双相位码的编码和译码过程在微机上的实现。工程实践和实验表明,用微机实现双相位码的编码和译码过程是切实可行的。试用在TDC-2000集散控制系统中获得了圆满成功。     

用CT技术确定砂岩的孔隙度

周渤然等．用ＣＴ技术确定砂岩的孔隙度．测井技术，１９９４，１８（３）：１７８～１８４本文首先提出用计算机层析（ＣＴ）技术确定砂岩孔隙度的原理和方法。通过对四块人工岩样和六十块砂岩岩样的测定，其结果表明该方法是可靠的。使用ＣＴ技术可定量、定性地解释某些岩样的内部特征，重矿物分布及裂缝变化情况。实践表明，采用图象减法技术则有助于消除光束硬化现象造成的误差。     

统计复用信道的数字用户环路复用设备

将信道传输容量动态分配技术应用于数字用户环路复用设备中，可用效地解决复用设备线路复用率和话音传输质量之间的矛盾，从而使复用设备具有最佳的传输效果。本文介绍了一种性能优良的统计复用信道的数字用户环路复用设备。