二阶双通带频率选择表面的设计与验证

设计了一种具有良好带通性能的二阶双通带高阶频率选择表面(FSS)。该FSS结构是在两层介质板上加载三层金属层。利用仿真软件对FSS结构进行计算,并加工实验样件并测试。结果表明:这种三层FSS具有二阶双通带性能,它的3 dB通带分别为10.26~12.24 GHz和16.61~17.49 GHz,两通带平稳光滑,中心插损小,且对不同角度、不同极化方式入射的电磁波保持很好的稳定性。     

一个用于高速信号传输的对PVT变化不敏感的低功耗锁相环

介绍了一个用于高速信号传输的低功耗锁相环. 提出了一种新的开环校准方法. 该校准通过上电时候进行的开环数字校准很大程度上减轻了工艺变化对电路的影响,相比以前的闭环校准方法,该方法可以显著缩短校准时间. 在这个锁相环中采用了双环路的结构来获得对工艺、温度和环境变化不敏感的环路参数：例如衰减因子、相位裕度等. 还设计了一种新的鉴频鉴相器,它内嵌了电平转换的功能,简化了电路. 该PLL的设计通过小心的供电网络划分来降低电源噪声的耦合. 设计的锁相环路在输出为1.6GHz的时候均方根抖动为3.1ps,而仅消耗约为1mA的电流.     

High power λ～8.5 μm quantum cascade laser grown by MOCVD operating continuous-wave up to 408 K

Robust quantum cascade laser(QCL)enduring high temperature continuous-wave(CW)operation is of critical import-ance for some applications.We report on the realization of lattice-matched InGaAs/lnAIAs/InP QCL materials grown by metal-organic chemical vapor deposition(MOCVD).High interface quality structures designed for light emission at 8.5μmare achieved by optimizing and precise controlling of growth conditions.A CW output power of 1.04 W at 288 K was obtained from a 4 mm-long and 10 μm-wide coated laser.Corresponding maximum wall-plug efficiency and threshold current density were 7.1％and 1.18 kA/cm2,respectively.The device can operate in CW mode up to 408 K with an output power of 160 mW.     

一种无需振荡器的数字频率抖动电路及其应用

为了解决滞环控制模式开关电源中无振荡器电路,从而无法使用现有频率抖动方式降低EMI和现有频率抖动电路调制方式单一、移植性差的问题,本文提出了一种新型的数字频率抖动电路,该电路结构简单,调制方式多样,可移植性好。本设计采用1μm 40V CMOS工艺进行仿真验证,Hspice仿真结果表明该数字频率抖动电路有效地降低了系统的EMI。     

A Hierarchical 3D Graft Printed with Nanoink for Functional Craniofacial Bone Restoration

An ideal craniofacial bone repair graft shall not only focus on the repair ability but also the regeneration of natural architecture with occlusal loads-related function restoration. However, such functional bone tissue engineering scaffold has rarely been reported. Herein, a hierarchical 3D graft is proposed for rebuilding craniofacial bone with both natural structure and healthy biofunction reconstruction. Inspired by the bone healing process, an organic–inorganic nanoink with ultrasmall calcium phosphate oligomers and bone morphogenetic protein-2 incorporated is developed for spatiotemporal guidance of new bone. Based on such homogeneous nanoink, a biomimetic graft, including a cortical layer containing Haversian system, and a cancellous layer featured with triply periodic minimum surface macrostructures, is fabricated via projection-based 3D printing method, and the layers are loaded with distinct concentrations of bioactive factors for regenerating new bone with gradient density. The graft exhibits excellent osteogenic and angiogenic potential in vitro, and accelerates revascularization and reconstructs neo-bone with original morphology in vivo. Benefiting from such natural architecture, loading force is widely transferred with reduced stress concentration around the inserted dental implant. Taken from native physiochemical and structural cues, this wstudy provides a novel strategy for functional tissue engineering through designing function-oriented biomaterials.     

Improved Reliability‐Based Iterative Decoding of LDPC Codes Based on Dynamic Threshold

A serial concatenated decoding algorithm with dynamic threshold is proposed for low‐density parity‐check codes with short and medium code lengths. The proposed approach uses a dynamic threshold to select a decoding result from belief propagation decoding and order statistic decoding, which improves the performance of the decoder at a negligible cost. Simulation results show that, under a high SNR region, the proposed concatenated decoder performs better than a serial concatenated decoder without threshold with an E_b/N₀ gain of above 0.1 dB.     

超宽带无线通信主要调制技术的研究及其应用

超宽带(Ultra-Wideband)技术是无线通信领域中的一种新兴的、非常有发展潜力的技术.文章介绍了UWB技术的的基本概念,重点介绍了UWB的主要调制技术,并分析了不同调制方法之间的不同点及彼此的优缺点,最后对不同调制技术的合理利用做了总结,并且对今后UWB技术的研究方向进行了展望.     

基于OpenGL的水下云台可视化实现

用于控制声纳姿态的水下云台在实际应用中需要实现可视化。将设计云台的Pro/E模型保存为STL标准三维图形文件格式,利用3D Explore软件将该STL文件转换为标准数组。通过Visual C++结合Open GL编程技术,实现了水下云台的可视化,对准确控制云台提供了帮助。     

Comparison of GexSi1—x Grown by UHV／CVD from Si2H6／GeH4 and SiH4／GeH4

Using double crystal X-rays diffraction (DCXRD) and atomic force microscopy (AFM), the results of Ge x Si 1- x grown by UHV/CVD from Si 2H 6 and SiH 4 are analyzed and compared. Adsorbates can migrate to the energy-favoring position due to the slow growth rate from SiH 4. In this case, a Si buffer that isolates the effect of substrate on epilayer could not be grown, which results in a pit penetrating into epilayer and buffer. The FWHM is 0.055° in DCXRD from SiH 4. The presence of diffraction fringes is an indication of an excellent crystalline quality. The roughness of the surface is improved if grown by Si 2H 6; however, the crystal quality of the Ge x Si 1- x material became worse than that from SiH 4 due to much larger growth rate from Si 2H 6. The content of Ge is obtained from DCXRD, which indicates the growth rate from Si 2H 6 is largest, then GeH 4, and that from SiH 4 is least.     

含La或Sm的BaNd_(2-y)R_yTi_(4+x)O_(12+2x)瓷的结构与性能

ＢａＯ－Ｎｄ２Ｏ３－ＴｉＯ２系富钛区含Ｌａ或Ｓｍ的陶瓷,ＸＲＤ、ＳＥＭ显微结构分析表明,其主晶相为Ｒ（Ｒ＝Ｌａ或Ｓｍ）取代Ｎｄ固溶体ＢａＮｄ２－ｙＲｙＴｉ５Ｏ１４和ＢａＮｄ２－ｙＲｙＴｉ４Ｏ１２,均属斜方晶系,并存在少量的次晶相Ｒ２Ｔｉ２Ｏ７、ＢａＴｉ４Ｏ９、Ｂａ２Ｔｉ９Ｏ２０等。富钛区ＢａＮｄ２Ｔｉ４＋ｘＯ１２＋２ｘ（ｘ＝０～１．４００）组分和含Ｌａ或Ｓｍ的ＢａＮｄ２－ｙＲｙＴｉ５Ｏ１４组分所组成的瓷料,介质损耗显著地降低,介电常数和电容温度系数遵从李赫涅德凯对数混合定律。