Synthesis and characterization of poly(N-propionyl)iminoethylene

Summary The cationic polymerization of 2-ethyl-2-oxazoline using CH₃I as initiator at different monomer/initiator ratios, temperatures, solvents and times of polymerization was carried out. The effect of these variables on the polymerization yield and viscosity of the polymers was studied. The poly(N-propionyl)iminoethylene was hydrolyzed in acid medium obtaining a linear poly(ethyleneimine) (PEI). All the polymers were characterized by elemental analysis, IR,¹H NMR, and¹³C NMR spectroscopy.     

Two-electrode DFB laser filter used as a wide tunable narrow-bandFM receiver: tuning analysis, characteristics and experimental FSK-WDMsystem

Characteristics of a two-electrode DFB laser filter are studied both theoretically and experimentally. Using a matrix analysis of spontaneous emission, a continuous tuning range of 6.7 Å is achieved by changing both net field gains of the two electrodes. A total discontinuous tuning range of over 10 nm comprising alternating mode jumps and continuous tuning range of 4 Å are measured experimentally. The laser filter presents a FWHM bandwidth of 5 GHz which depends on the optical input power. In addition, it is demonstrated that a DFB laser filter can act as a frequency discriminator/photodetector, i.e., a narrow-band FM receiver, with a uniform bandwidth of 1.5 GHz. Using the two-electrode DFB laser for both transmitter and receiver, a two-channel FSK-WDM transmission system utilizing the discontinuous tuning range is reported. The advantage of such a device is the simplicity as compared to the heterodyne technique     

Choice of design of cryogenic vessels with minimal weight

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 20–22, March, 1991.     

Comparison between the effects of positive noncatastrophic HBM ESDstress in n-channel and p-channel power MOSFETs

The effect of noncatastrophic positive human body model (HBM) electrostatic discharge (ESD) stress on n-channel power MOSFETs is radically different from that on p-channel MOSFETs. In n-channel transistors, the stress causes negative shifts of the current-voltage characteristics indicative of positive charge trapping in the gate oxide. In p-channel transistors, the stress increases the drain-to-source leakage current, probably due to localized avalanche electron injection from the p-doped drain     

Conformational effects in the reversed-phase chromatographic behavior of recombinant human growth hormone (rhGH) and N-methionyl recombinant human growth hormone (Met-hGH).

This paper examines the retention behavior of recombinant DNA-derived human growth hormone (rhGH) in reversed-phase chromatography and its separation from the closely related N-methionyl variant (Met-hGH). It is first shown that retention for rhGH decreases with increasing column temperature when 1-propanol (1-PrOH) is used as organic modifier. On the other hand, retention increases with temperature when acetonitrile (CH3CN) is employed. The differences in behavior for the two organic modifiers could be related to conformational changes in the protein as determined by solution and adsorption intrinsic fluorescence spectroscopy. Specifically, desorption and elution of rhGH using 1-PrOH could be correlated with a solvent-induced conformational change, with retention decreasing with increasing temperature due to the increasing ease of structural alteration. On the other hand for CH3CN the increase in retention correlated with temperature rise was related to a partial structural change yielding a more hydrophobic species. In this case, a surface-driven process is suggested. The work then turned to the separation of rhGH and Met-hGH where it was found for both organic modifiers optimum separation occurred at 45 degrees C and pH 6.5. Separate studies revealed that during the conformational change Met-hGH appeared more hydrophobic than rhGH since protein-protein aggregation was observed at a lower 1-PrOH concentration. It is suggested that this hydrophobic difference, which was optimized under the conditions cited above, resulted in the separation. The study demonstrates the importance of conformational changes in retention behavior and separation of protein samples.     

The effect of coil parameters on the distribution of steep-frontedsurges in machine windings

The authors identify the coil parameters that are of importance, when assessing interturn voltages produced by steep-fronted transients. The studies are based on a multiconductor transmission line computer model of a machine winding energized by a simple ramp function. Variations in interturn voltages produced by changes in insulation thickness, insulation permittivity, turn geometry, coil length and number of turns are examined and certain guidelines for avoiding high interturn voltages are evaluated. An application study is included to show how interturn voltages can be significantly reduced by applying these guidelines     

Influence of corticotropin-releasing factor on pancreatic and islet blood flow in different regions of the rat pancreas

Corticotropin-releasing factor (CRF) has previously been shown to selectively dilate the mesenteric vascular bed, without affecting other vascular beds. Pancreatic blood flow and islet blood flow were therefore measured separately with a microsphere technique in the two regions of the rat pancreas perfused by the superior mesenteric artery (SMA) or celiac artery (CA) respectively. Intravenous infusion of CRF (0.25 microgram/kg b.w./min) caused an increase in both whole pancreatic blood flow and islet blood flow in the region of the pancreas perfused by the SMA. The fraction of whole pancreatic blood flow diverted through the islets in this part of the pancreas was, however, unaffected by CRF infusion (approximately 10%). CRF did not change either pancreatic or islet blood flow in the CA-perfused part of the pancreas, and did not affect the release of insulin.     

Large-scale quantum mechanical simulations of high- Z metals

High-Z metals constitute a particular challenge for large-scale ab initio electronic-structure calculations, as they require high resolution due to the presence of strongly localized states and require many eigenstates to be computed due to the large number of electrons and need to accurately resolve the Fermi surface. Here, we report recent findings on high-Z metals, using an efficient massively parallel planewave implementation on some of the largest computational architectures currently available. We discuss the particular architectures employed and methodological advances required to harness them effectively. We present a pair-correlation function for U, calculated using quantum molecular dynamics, and discuss relaxations of Pu atoms in the vicinity of defects in aged and alloyed Pu. We find that the self-irradiation associated with aging has a negligible effect on the compressibility of Pu relative to other factors such as alloying. The US Goverment’s right to retain a non-exclusive, royalty-free license in and to any copyright is acknowledged.