Sintering behavior,microstructure and thermoelectric properties of calcium cobaltite thick films for transversal thermoelectric multilayer generators

The sintering behavior and the thermoelectric performance of Ca₃Co₄O₉ multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A transversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca₃Co₄O₉ green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT = 200 K in the temperature interval of 25 °C to 300 °C.     

Application of inline imaging for monitoring crystallization process in a continuous oscillatory baffled crystallizer

In this study, an in situ imaging system has been analysed to characterize the crystal size, the shape and the number of particles during a continuous crystallization process in a Continuous Oscillatory Baffled Crystallizer (COBC). Two image analysis approaches were examined for particle characterization in the suspension containing both small nuclei and larger grown crystals (nonspherical and irregular in shape). The pattern matching approach, in which the particles are approximated to be spherical, did result in an overestimation of the size. Alternatively, a segmentation‐based algorithm resulted in reliable crystal size and shape characteristics. The laser diffraction analysis in comparison to the image analysis overestimated the particle sizes due to the agglomeration of particles upon filtration and drying. The trend in the particle counts during the start of crystallization process, including nucleation, determined by the image analysis probe was comparable with the one measured by FBRM, highlighting the potential of in situ imaging for process monitoring. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2450–2461, 2018     

Surface properties of surfactants derived from natural products. Part 1: Syntheses and structure/property relationships—Solubility and emulsification

Several novel and some previously known, mostly sugar-based, surfactants have been synthesized and some of their surface properties have been characterized and compared with those of commercial nonylphenol ethoxylates. The surfactant solubility in water, ethanol, and dodecane was studied. The properties of these compounds as emulsification agents in systems composed of the surfactant with water/isopropyl myristate, water/rapeseed oil, and water/dodecane are presented. The aqueous solubility of the surfactants follows the general trend expected from their hydrophilic-lipophilic balance according to Griffin (HLBG), but it is also clear that the nature of the headgroup and the structure of the nonpolar part affect the solubility in a manner not aptured in the standard HLBG concept. An ester or amine group as the connecting unit between the hydrophile and the hydrophobe produces a more water-soluble surfactant than the corresponding amide derivative. Some effective emulsifiers were found. For instance, the surfactants with a dehydroabietic nonpolar group appear to be promosing emulsifiers. Most sugar-based surfactants were able to form macroemulsions of up to around 2 wt/vol% of oil. The stability of many of these amulsions was very high, extending for months.     

Characterisation of three different impellers using the LDV-technique

A characterisation of three commonly used impellers was made in this study by measuring local mean velocities and the fluctuations of these velocities with the LDV technique. The data was used to estimate volumetric flow, velocity fluctuations and turbulent intensity in the impeller region of the tank. The impellers investigated were a high flow impeller, a pitched blade turbine and a Rushton turbine. The cylindrical vessel used was made of Perspex, had a dished bottom (DIN 28013), was equipped with four baffles and had an inner diameter of 0.45 m. It was found that the bulk velocities could be scaled with the tip-speed of the impeller (ND). The flow rate at constant impeller speed increased in the order high flow impeller — Rushton turbine — pitched blade turbine. The corresponding order for the turbulence fluctuation is: high flow impeller — pitched blade turbine — Rushton turbine. The velocity profile of the flow out from the high flow impeller was furthermore, not as smooth as could be expected.     

Sludge Pre-Treatment through Ozone Application: Alternative Sludge Reuse Possibilities for Recirculating Aquaculture System Optimization

Recirculating Aquaculture Systems (RAS) reduce water consumption by efficient filtration to maintain appropriate levels of accumulating compounds and sludge. Sludge is mechanically separated by drum filters and disposed of to the detriment of overall system water budgets. Dissolved nitrogen compounds are reduced via nitrification–denitrification filters, requiring commercial external carbon sources. The reuse of sludge after ozone pre-treatment may represent the next step in RAS optimization. The present study analyzes the content of sludge from RAS and tests ozonation as a pre-treatment for recycling as carbon source. The dissociative effect of ozone and the physicochemical changes due to ozonation lead to a significant increase in soluble carbon availability. Predominantly long-chain fatty acid (FA) (saturated and unsaturated) with 16 and 18 carbon atoms independently of the treatment were found in the profiles. Saturated FA concentrations in solution increased after 20, 40, and 60 min ozonation. The solid content of the sludge was practically unaffected by ozonation in terms of FA profile: only saturated FA slightly increases after 40 min treatment. The implications of these findings for denitrifying bacteria are discussed.

Abbreviations: Recirculating Aquaculture Systems (RAS); Advanced Oxidation Processes (AOPs)     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

Dynamic processes of domain switching in lead zirconate titanate under cyclic mechanical loading by in situ neutron diffraction

The performance of ferroelectric ceramics is governed by the ability of domains to switch. A decrease in the switching ability can lead to degradation of the materials and failure of ferroelectric devices. In this work the dynamic properties of domain reorientation are studied. In situ time-of-flight neutron diffraction is used to probe the evolution of ferroelastic domain texture under mechanical cyclic loading in bulk lead zirconate titanate ceramics. The high sensitivity of neutron diffraction to lattice strain is exploited to precisely analyze the change of domain texture and strain through a full-pattern Rietveld method. These results are then used to construct a viscoelastic model, which explains the correlation between macroscopic phenomena (i.e. creep and recovered deformation) and microscopic dynamic behavior (i.e. ferroelastic switching, lattice strain).     

Identification and Function of Prothoracic Exocrine Gland Steroids of the Dytiscid Beetles Graphoderus cinereus and Laccophilus minutus

The chemical composition of the prothoracic defensive secretion of the water beetles Graphoderus cinereus and Laccophilus minutus was examined by gas chromatographic–mass spectrometric analysis of trimethylsilylated gland extracts. The main components are 3,11-dihydroxy-5-pregnan-20-one in G. cinereus and 3,12-dihydroxy-5-pregnan20-one in L. minutus. Fully saturated pregnanes have not been found in the prothoracic defensive glands of dytiscids before. Based on tests with synthetic compounds, their biological role was examined in a feeding assay with the minnow Phoxinus phoxinus. Agar pellets containing either steroid strongly deterred feeding.