In situ leaching method for determination of chloride in concrete pore water

In the in situ leaching (ISL) method, pore water ionic content is determined in small cavities drilled in mortar/concrete specimens. Prior investigations have demonstrated the ISL applicability to obtain pH and nitrite ion concentration in concrete/mortar pore water. The application of the method is extended here to determine pore water chloride ion concentration (and pH) within practical test times in mortars and concretes prepared in the laboratory and in concrete cores extracted from a bridge deck in deicing salt service. Spatial resolution for the determination of composition profiles is also illustrated. Modeling of the ISL process indicates that chloride binding accelerates the approach toward a terminal cavity concentration, reducing test duration to practical lengths for moderate permeability concretes. This acceleration can be attributed to maintaining a higher gradient of free chloride near the cavity wall due to the release, during leaching, of previously bound chloride. Consequently, there is a faster chloride buildup in the cavity water compared with the no-binding case. Experimental chloride and pH results obtained by the ISL test in mortar samples show good agreement with those from the pore water expression (PWE) method. Also, examples are presented of application of ISL data to obtain chloride binding isotherms, and pore water chloride to hydroxide ratio relevant to assessing conditions for corrosion of steel reinforcement. The ISL method presents a less costly and less disruptive alternative to PWE for pore water analysis. It is noted, however, that in a few instances ISL could not be implemented because of excessive absorption of cavity water by the surrounding medium.     

Enterotoxigenic <Emphasis Type="Italic">Escherichia coli</Emphasis> strains bind bovine milk gangliosides in a ceramide-dependent process

Diarrhea caused by enterotoxigenic Escherichia coli (ETEC) is the main infectious disease of newborn calves. The first step of infection involves bacterial attachment to the intestinal mucosa. This adhesion is mediated by fimbriae that recognize some glycoconjugates on the host cell surface, in particular, several gangliosides. Because milk also contains gangliosides, these have been suggested to serve as ligands for bacterial fimbriae and thus prevent the bacterial attachment to mucosa. The most relevant ETEC strains in calves, including those with K99 and F41 fimbriae, were assayed to determine whether they are able to bind gangliosides isolated from several stages of bovine lactation. Both GM3 and GD3, the main gangliosides of milk, were recognized by ETEC strains, although the different fimbriae showed diverse levels of affinity. Unexpectedly, the adhesion to colostral gangliosides was considerably weaker than that to gangliosides from the other stages of lactation. Because the carbohydrate moiety did not change and because differences in the percentages of unsaturated FA and sphingosine between colostrum and other stages were observed, we conclude that the differences in adhesion could be due to a different composition of the ganglioside caramide.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

A New Nonlinear Controller for Trajectory Tracking of the Longitudinal Dynamics of a Small Scale Helicopter

A nonlinear control scheme is proposed for the trajectory tracking problem of a small scale helicopter’s longitudinal dynamics. The control scheme is based on a control design procedure that constructs static feedback regulators for nonlinear systems which are linearizable by dynamic feedback. Besides, the flatness characteristics of the helicopter’s longitudinal dynamics are used to design the desired trajectory. The controller proposed is based on the longitudinal model of the small scale helicopter including the main rotor and stabilizer bar dynamics. Sufficient conditions are given to guarantee asymptotic convergence to zero of the tracking error and to keep the main rotor thrust always negative assuming that all the helicopter’s parameters are known and that all helicopter’s states are measured. Numerical simulations are given to show the performance of the controller in the presence of the main rotor and stabilizer bar dynamics.     

Autocalibration with the Minimum Number of Cameras with Known Pixel Shape

In 3D reconstruction, the recovery of the calibration parameters of the cameras is paramount since it provides metric information about the observed scene, e.g., measures of angles and ratios of distances. Autocalibration enables the estimation of the camera parameters without using a calibration device, but by enforcing simple constraints on the camera parameters. In the absence of information about the internal camera parameters such as the focal length and the principal point, the knowledge of the camera pixel shape is usually the only available constraint. Given a projective reconstruction of a rigid scene, we address the problem of the autocalibration of a minimal set of cameras with known pixel shape and otherwise arbitrarily varying intrinsic and extrinsic parameters. We propose an algorithm that only requires 5 cameras (the theoretical minimum), thus halving the number of cameras required by previous algorithms based on the same constraint. To this purpose, we introduce as our basic geometric tool the six-line conic variety (SLCV), consisting in the set of planes intersecting six given lines of 3D space in points of a conic. We show that the set of solutions of the Euclidean upgrading problem for three cameras with known pixel shape can be parameterized in a computationally efficient way. This parameterization is then used to solve autocalibration from five or more cameras, reducing the three-dimensional search space to a two-dimensional one. We provide experiments with real images showing the good performance of the technique.     

Synthesis of deuterated cyclopropene fatty esters structurally related to palmitic and myristic acids

To develop a synthesis of tritiated cyclopropene fatty acids (CPFA), compounds that should prove useful for affinity labeling of desaturases in insect pheromone biosynthetic studies, a series of novel, selectively deuterated CPFA analogues was prepared and characterized. In methyl [16-²H]12,13-methylene-12-hexadecenoate, the incorporation of deuterium was achieved by treatment of the corresponding ω-chloro derivative with sodium borodeuteride in dimethylsulfoxide at 70°C for 24 h (67% yield) following conventional procedures. Alkylation of the tetrahydropyranyl derivative of 13-tridecynol in the presence of lithium diisopropylamide in tetrahydrofuran at −20°C with 1-chloro-3-iodopropane in hexamethylphosphoramide, followed by Jones oxidation of the crude product, yielded 16-chloro-12-hexadecynoic acid (54%), which was esterified to the corresponding methyl ester by treatment with potassium carbonate and methyl iodide in dimethylformamide. Treatment of this acetylenic ester with ethyldiazoacetate in the presence of activated copper-bronze as catalyst followed by hydrolysis in KOH solution at room temperature yielded 16-chloro-12,13-(carboxymethylene)-12-hexadecenoic acid. This diacid was treated with excess oxalyl chloride to give the corresponding diacyl chloride, which was decarbonylated in a diethyl ether solution with zinc chloride, and the cyclopropenium ions thus formed were added at −40°C to a methanolic sodium hydroxide solution of sodium borohydride to give methyl 16-chloro-12,13-methylene-12-hexadecenoate. Analogous procedures were followed to prepare methyl [17-²H]10,11-methylene-10-hexadecenoate, methyl [17-²H]11,12-methylene-11-hexadecenoate and methyl [17-²H]12,13-methylene-12-hexadecenoate from the corresponding diacids using sodium borodeuteride in the reduction of the cyclopropenium ions. Alternatively, methyl [2,2,3,3-²H₄]hexadecynoate, prepared by reaction of methyl 2,11-hexadecadiynoate with magnesium in deuterated methanol at room temperature, was submitted to the above cyclopropenylation and reductive decarbonylation sequence to give methyl [2,2,3,3,17-²H₅]-11,12-methylene-11-hexadecenoate. In summary, complementary methods for the selective incorporation of one to five deuterium atoms into cyclopropene fatty acids, at different sites, in moderate to high yields have been developed. The methods should easily be applicable to the preparation of the corresponding tritiated analogues.     

New phospholipid fatty acids from the marine spongeCinachyrella alloclada uliczka

The fatty acid composition of phospholipids from the Senegalese spongeCinachyrella alloclada was examined. Two new fatty acids not hitherto found in nature, namely 10,13-octadecadienoic acid and 16-tricosenoic acid, were identified. 8-Hexadecenoic, 13-nonadecenoic and 5,9,13-trimethyltretradecanoic fatty acids were also found for the first time in sponges. The latter compound (1.4% of the total fatty acid mixture), an isoprenoid fatty acid, accompanies the major fatty acid 4,8,12-trimethyltridecanoic acid (19.7%). The monomethyl branched fatty acids (22%) identified include 23-methylpentacosanoic acid (anteiso-26∶0), not previously observed in sponged. The major long-chain fatty acids encountered were the known 17-tetracosenoic 19-heptacosadienoic and 5,9,23-tricontatrienoic acid. Some sixty fatty acids were identified as methyl esters andN-acyl pyrrolidides by gas chromatography and gas chromatography/mass spectrometry.     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.     

Mass transfer coefficients of styrene and oxygen into silicone oil emulsions in a bubble reactor

The absorption of oxygen and styrene in water-silicone oil emulsions was independently studied in laboratory-scale bubble reactors at a constant gas flow rate for the whole range of emulsion compositions (0-10% v/v). The volumetric mass transfer coefficients to the emulsions were experimentally measured using a dynamic absorption method. It was assumed that the gas phase contacts preferentially the water phase. In the case of oxygen absorption, it was found that the addition of silicone oil hinders oxygen mass transfer compared to an air-water system. Decreases in k_La_oxygen of up to 25% were noted. Such decreases in the oxygen mass transfer coefficient, which imply longer aeration times to transfer oxygen, could represent a limiting step in biotechnological processes strongly dependent on oxygen concentration. Nevertheless, as the large affinity of silicone oil for oxygen enables greater amounts of oxygen to be transferred from the gas phase, it appears that the addition of more than 5% silicone oil should be beneficial to increase the oxygen transfer rate. In the case of styrene absorption, it was established that the volumetric mass transfer coefficient based on the emulsion volume is roughly constant with the increase in the emulsion composition. In spite of the relatively high cost of silicone oil, water-silicone oil emulsions remain relevant to treat low-solubility volatile organic compounds, such as styrene, in low-concentration gas streams.     

Electrodeposition and dissolution of yttrium-hexacyanoferrate layers

The electrodeposition and dissolution of yttrium-hexacyanoferrate [YHCNFe(II)] were investigated by electrochemical quartz crystal microbalance technique (EQCM). The electrodeposition was carried out by potential cycling or stepping from solutions of Y(NO₃)₃ and K₃[Fe^III(CN)₆] of different concentrations. The ratio of the reactants was also varied. No deposition was found in dilute solutions (c < 10⁻³ mol dm⁻³). The increase of concentrations led to an intense deposition of YHCNFe(II) in the course of reduction of [Fe^III(CN)₆]³⁻. At high concentrations of the reactants a coagulation deposition of YHCNFe(III) at open-circuit has also been detected. During the reduction the first phase is the nucleation which requires saturation or oversaturation in respect to the reacting species near the gold surface. The growth phase is much faster than the formation of nuclei, and its rate depends on the concentration and the concentration ratio of the species. The composition of the deposits has been determined by total reflection X-ray fluorescence (TXRF) spectrometry. From the molar ratio of atomic constituents (K, Y and Fe) of the slightly soluble deposit (solubility: 5 × 10⁻⁵ mol dm⁻³) formed after reduction of Fe(III) a formula K_0.46Y_1.18[Fe^II(CN)₆] can be derived. This value is in good accordance with the molar mass calculated from the results of EQCM experiments which also revealed that the deposit contains ca. 2 mol H₂O/mol YHCNFe(II). The solubility of YHCNFe(III) is substantially higher (s = 2 × 10⁻³ mol dm⁻³), and according to the results of TXRF measurements, its composition is Y[Fe^III(CN)₆]. The reoxidation of YHCNFe(II) takes place in two steps. The first one is a partial oxidation which is accompanied by the desorption of K⁺ ions from the layer. During further oxidation a fast dissolution occurs due to the high solubility of YHCNFe(III).