The short-term effect of air pollution on cardiovascular mortality in Tianjin, China: comparison of time series and case-crossover analyses

Background

Many studies have illustrated that ambient air pollution negatively impacts on health. However, little evidence is available for the effects of air pollution on cardiovascular mortality (CVM) in Tianjin, China. Also, no study has examined which strata length for the time-stratified case-crossover analysis gives estimates that most closely match the estimates from time series analysis.

Objectives

The purpose of this study was to estimate the effects of air pollutants on CVM in Tianjin, China, and compare time-stratified case-crossover and time series analyses.

Method

A time-stratified case-crossover and generalized additive model (time series) were applied to examine the impact of air pollution on CVM from 2005 to 2007. Four time-stratified case-crossover analyses were used by varying the stratum length (Calendar month, 28, 21 or 14 days). Jackknifing was used to compare the methods. Residual analysis was used to check whether the models fitted well.

Results

Both case-crossover and time series analyses show that air pollutants (PM₁₀, SO₂ and NO₂) were positively associated with CVM. The estimates from the time-stratified case-crossover varied greatly with changing strata length. The estimates from the time series analyses varied slightly with changing degrees of freedom per year for time. The residuals from the time series analyses had less autocorrelation than those from the case-crossover analyses indicating a better fit.

Conclusion

Air pollution was associated with an increased risk of CVM in Tianjin, China. Time series analyses performed better than the time-stratified case-crossover analyses in terms of residual checking.     

Rapid and complete destruction of perchlorate in water and ion-exchange brine using stabilized zero-valent iron nanoparticles

Perchlorate has emerged as a widespread contaminant in groundwater and surface water. Because of the unique chemistry of perchlorate, it has been challenging to destroy perchlorate. This study tested the feasibility of using a new class of stabilized zero-valent iron (ZVI) nanoparticles for complete transformation of perchlorate in water or ion-exchange brine. Batch kinetic tests showed that at an iron dosage of 1.8 g L(-1) and at moderately elevated temperatures (90-95 degrees C), approximately 90% of perchlorate in both fresh water and a simulated ion-exchange brine (NaCl=6% (w/w)) was destroyed within 7h. An activation energy (Ea) of 52.59+/-8.41 kJ mol(-1) was determined for the reaction. Kinetic tests suggested that Cl(VII) in perchlorate was rapidly reduced to chloride without accumulation of any intermediate products. Based on the surface-area-normalized rate constant k(SA), starch- and CMC-stabilized ZVI nanoparticles degraded perchlorate 1.8 and 3.3 times, respectively, faster than non-stabilized ZVI particles. Addition of a metal catalyst (Al, Cu, Co, Ni, Pd, or Re) did not show any reaction improvement. This technology provides an effective method for complete destruction of perchlorate in both contaminated water and brine.     

Selective heavy metals removal from waters by amorphous zirconium phosphate: behavior and mechanism

Selective removal of heavy metals from water has been of considerable concern for several decades. In the present study, the amorphous zirconium phosphate (ZrP) was synthesized and characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron micrography (SEM), thermogravimetric analysis (TGA) as well as pH-titration experiments. Uptake of heavy metals including lead, cadmium, and zinc onto ZrP was studied by using a polystyrene sulfonic-acid exchanger D-001 as a reference sorbent and Ca(2+) as a competing cation due to its ubiquity in natural or industrial waters. The results indicated that the uptake of heavy metals onto ZrP is essentially an ion-exchange process and dependent upon solution pH. In comparison with D-001, ZrP exhibited more favorable sorption of heavy metals particularly in terms of high selectivity, as indicated by the distribution coefficients of ZrP even several orders higher than D-001 towards heavy metals when calcium ion coexisted at a high level in solution. The Fourier transform-infrared (FT-IR) spectroscopic investigation indicated that the uptake of calcium, cadmium, and zinc ions onto ZrP is only driven by the electrostatic interaction, while that of lead ion is possibly dependent upon the inner-sphere complex formation with ZrP. XPS results further elucidated that ZrP displays different sorption affinity towards heavy metals in the same order as selectivity sequence of Pb(2+)>Zn(2+) approximately Cd(2+)>Ca(2+), which can be explained by hard and soft acids and bases (HASB) theory. Moreover, uptake of heavy metals onto ZrP approached to equilibrium quickly and the used ZrP could be readily regenerated for reuse by the dilute HCl solution. Thus, all the results suggest that amorphous ZrP has excellent potential as a sorption material for water treatment.     

The role of dietary oxidized cholesterol and oxidized fatty acids in the development of atherosclerosis

The etiology of atherosclerosis is complex and multifactorial but there is extensive evidence indicating that oxidized lipoproteins may play a key role. At present, the site and mechanism by which lipoproteins are oxidized are not resolved, and it is not clear if oxidized lipoproteins form locally in the artery wall and/or are sequestered in atherosclerotic lesions following the uptake of circulating oxidized lipoproteins. We have been focusing our studies on demonstrating that such potentially atherogenic oxidized lipoproteins in the circulation are at least partially derived from oxidized lipids in the diet. Thus, the purpose of our work has been to determine in humans whether oxidized dietary oxidized fats such as oxidized fatty acids and oxidized cholesterol are absorbed and contribute to the pool of oxidized lipids in circulating lipoproteins. When a meal containing oxidized linoleic acid was fed to normal subjects, oxidized fatty acids were found only in the postprandial chylomicron/chylomicron remnants (CM/RM) which were cleared from circulation within 8 h. No oxidized fatty acids were detected in low density lipoprotein (LDL) or high density lipoprotein (HDL) fractions at any time. However, when alpha-epoxy cholesterol was fed to human subjects, alpha-epoxy cholesterol in serum was found in CM/RM and also in endogenous very low density lipoprotein, LDL, and HDL and remained in the circulation for 72 h. In vitro incubation of the CM/RM fraction containing alpha-epoxy cholesterol with human LDL and HDL that did not contain alpha-epoxy cholesterol resulted in a rapid transfer of oxidized cholesterol from CM/RM to both LDL and HDL. We have suggested that cholesteryl ester transfer protein is mediating the transfer. Thus, alpha-epoxy cholesterol in the diet is incorporated into CM/RM fraction and then transferred to LDL and HDL contributing to lipoprotein oxidation. We hypothesize that diet-derived oxidized fatty acids in chylomicron remnants and oxidized cholesterol in remnants and LDL accelerate atherosclerosis by increasing oxidized lipid levels in circulating LDL and chylomicron remnants. This hypothesis is supported by our feeding experiments in animals. When rabbits were fed oxidized fatty acids or oxidized cholesterol, the fatty streak lesions in the aorta were increased by 100%. Moreover, dietary oxidized cholesterol significantly increased aortic lesions in apo-E and LDL receptor-deficient mice. A typical Western diet is rich in oxidized fats and therefore could contribute to the increased arterial atherosclerosis in our population.     

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions

A novel solid amine sorbent was prepared using KIT-6-type mesoporous silica modified with tetraethylenepentamine (TEPA). Its adsorption behavior toward CO(2) from simulated flue gases is investigated using an adsorption column. The adsorption capacities at temperatures of 303, 313, 333, 343, and 353 K are 2.10, 2.29, 2.58, 2.85, and 2.71 mmol g(-1), respectively. Experimental adsorption isotherms were obtained, and the average isosteric heat of adsorption was 43.8 kJ/mol. The adsorption capacity increases to 3.2 mmol g(-1) when the relative humidity (RH) of the simulated flue gas reaches 37%. The adsorption capacity is inhibited slightly by the presence of SO(2) at concentrations lower than 300 ppm but is not significantly influenced by NO at concentrations up to 400 ppm. The adsorbent is completely regenerated in 10 min at 393 K and a pressure of 5 KPa, with expected consumption energy of about 1.41 MJ kg(-1) CO(2). The adsorption capacity remains almost the same after 10 cycles of adsorption/regeneration with adsorption conditions of 10 vol % CO(2), 100 ppm SO(2), 200 ppm NO, 100% relative humidity, and a temperature of 393 K. The solid amine sorbent, KIT-6(TEPA), performs excellently for CO(2) capture and its separation from flue gas.     

Dual excitable upconversion nanoparticle@polydopamine nanocomposite with intense red emission and efficient photothermal generation

Integration of strong upconversion emission with deep tissue penetration and stable photothermal generation is of great significance for imaging-guided photothermal therapy under infrared excitation.Herein,the NaYF4:Yb³⁺,Ho³⁺,Ce³⁺ @NaGdF₄:Yb³⁺,Nd³⁺@NaGdF₄ core-shell-shell upconversion nanoparticles(UCNPs) with increasing Ce³⁺ doping concentration were firstly synthesized,in which the size manipulation,enhance...     

Low-Power Design of Ethernet Data Transmission

For the reliability and power consumption issues of Ethernet data transmission based on the field programmable gate array （FPGA）, a low-power consumption design method is proposed, which is suitable for FPGA implementation. To reduce the dynamic power consumption of integrated circuit （IC） design, the proposed method adopts the dynamic control of the clock frequency. For most of the time, when the port is in the idle state or lower-rate state, users can reduce or even turn off the reading clock frequency and reduce the clock flip frequency in order to reduce the dynamic power consumption. When the receiving rate is high, the reading clock frequency will be improved timely to ensure that no data will lost. Simulated and verified by Modelsim, the proposed method can dynamically control the clock frequency, including the dynamic switching of high-speed and low-speed clock flip rates, or stop of the clock flip.     

它们陪我共同度过

使用PPC已经有一年多了，它在我的生活与学习上抢演着不可替代的重要角色。惟一让人郁闷的是，经常有人看到我在PPC上看书或查词典的时候，就会问：“嗬！什么时候商务通这样漂亮了？”真是让人器笑不得。     

KS5.7离心式脱粉机在潘三选煤厂的应用

介绍了离心式脱粉机的结构、工作原理及其在潘三选煤厂的应用实践。     

古岩溶洞穴型储层分布规律的测井地质研究

1. Introduction Carbonate rock is now an important petroleum exploration area in China, and the paleokarst reservoir is a very common type of carbonate reservoir. In recent years, two large-scale oilfields, Tahe and Lunnan, have been discovered in paleoka…