计算机模拟扫描电镜颗粒边缘粗糙度外貌特征

各种石英颗粒表面特征的发育与否,是任何扫描电镜分析重建地质环境的基础,对于在石英颗粒表面获得的许多可见特征来说,虽然已有许多"清单"(Krinsley和Donahue,1968:Cater,1984),但是,专门检测技术的有效性还是一个争论的问题.由这类分析获得的最为重要的物理参数之一是边缘磨蚀,因为圆度值是一种发现于石英砂颗粒的主要形态特征.例如,1984年Goudie和Bull发现两类非洲沉积物之间的主要差异是,在深度风化剖面中总体缺乏边缘磨蚀颗粒,并以此为基础建立了该研究区的斜坡     

Ergonomics in sickle operation

Sickle operation in harvesting has been analysed with reference to design features of nine different types of sickles, and field and laboratory based investigations on biomechanical stresses and physiological valuation on six farmers. It has been indicated that the blade geometry contributes significantly to human performance and there is ample scope for further design optimisation. The suggested modifications are: (i) sickle weight - 200 g; (ii) total length of sickle - 33 cm; (iii) handle length - 11 cm; (iv) handle diameter - 3 c cm; (v) radius of blade curvature - 15 cm; (vi) blade concavity - 5 cm; (vii) serrated sickle: tooth pitch - 0.20 cm and tooth angle - 60 degrees; (viii) ratio of the length of cutting surface to chord length - 1.20.     

Pressure-induced conversion of α-connectin to β-connectin

The mechanism of the pressure-induced tenderization of meat has not been fully established in spite of its beneficial effect. To detect the changes in the large structural proteins of the myofibrils induced by pressurization without heat treatment, high hydrostatic pressure (100-300 MPa) was applied to rabbit at-death skeletal muscle for 10 min at low temperature (0-2°C). Significant differences in the electrophoretic pattern of connectin (also called titin) in isolated myofibrils were observed between the control and pressurized muscle samples. The conversion of α-connectin (2800 kDa) to β-connectin (2100 kDa) was accelerated with increasing pressure applied to the muscle; also nebulin (800 kDa) was degraded by pressure treatment. From the results it is clear that the degradation of connectin is induced by pressurization alone without heat treatment. If the conversion of α-connectin to β-connectin during conditioning has some influence on meat tenderization, the pressure-induced conversion of α- to β-connectin is possibly one of the causes of pressure-induced tenderization of meat.     

Standing up to the big squeeze

Consumer confidence is at its lowest ebb since 1980. Economic growth is at a standstill & unemployment & inflation are both rising. Here's a front-line report from more than three dozen operators who are fending off the recession's dual pressures of slow sales & rising costs. They are using discount pricing, partnering with vendors, setting pay for performance standards & a variety of other recession-beating practices.     

Thermoelastic coefficients of alpha quartz

Experimental measurements of alpha quartz thermal expansion as reported in the literature have been critically analyzed. A recommended set of best measured values over the temperature range -50 degrees C to +150 degrees C have been determined, as have values for the coefficient of thermal linear expansion (CTE) and the thermoelastic coefficients. The impact of using the coefficients on determinations of quartz material temperature coefficients and on the calculation of temperature coefficients of frequency for the case of the AT-cut is discussed.     

A volume-perturbation approach to the problem of Rayleigh wave scattering at a rectangular groove

The problem of scattering of Rayleigh waves at a rectangular groove is addressed. Grooves are known to excite bulk waves upon scattering and, hence, are potential sources (albeit secondary) in bulk-acoustic-wave (BAW) devices. The groove is formulated as a volume perturbation of the geometry. A modal method is used, and the results of Rayleigh wave reflection as well as bulk wave radiation are obtained and compared with the results available in the literature. The method is compared with the boundary perturbation formulation. The equivalence of the boundary perturbation method and the volume perturbation method is shown.     

Human error identification in human reliability assessment. Part 2: Detailed comparison of techniques

This is the second part of a two-part review of human error identification (HEI) approaches in human reliability assessment (HRA). Part 1 reviewed the probabilistic risk assessment (PRA) context in which HRA occurs, and then detailed 12 HEI techniques which have evolved in the field of HRA. Part 2 attempts to compare the way these techniques perform against a range of criteria relevant to HEI theoretical and empirical validity, and practical usefulness in applied HRA. It is hoped that these comparisons will help assessors in the selection of techniques for practical applications. The comparisons also point to research and development needs in the area of applied HEI.     

Work environment functions in small enterprises in Sweden

In Sweden, a governmental commission has formed new strategies concerning the work environment with the aims of reducing employee absenteeism and re-employing those individuals who have already left employment as a result of bad working conditions. The main features in this new approach are: strengthening of the legislation; a responsibility for work injury costs; and a distinct rehabilitation responsibility. In this paper the authors discuss how these proposals suited the constraints and facilities of small enterprises, employing less than 50 persons. The results are based on interviews carried out with company directors, safety representatives and labour inspectors. The interviews revealed that the company directors had a negative attitude towards both the strengthening of legislation and responsibility for work injury costs. It was also revealed that the small companies lack both knowledge of how a good environment can be created and the state of their own work environment. It seems that the small companies cannot handle work environment questions in a systematic way without comprehensive education and training or without seeking expert assistance outside the company.