Behavior of ZrO2-C Refractories in Thin-strip Casting of Steel

Zirconia graphite refractory is used as a core-nozzle in the thin-strip casting of steel. Post-mortem analysis of used refractory was performed in an effort to establish the failure mechanism. Corrosion behavior was studied against molten steel with Mn O- SiO 2based liquid inclusions. Corrosion of these materials involves dissolution and oxidation of graphite in the matrix followed by penetration of liquid slag leading to degradation of ZrO 2particles. Thermodynamic equilibrium calculations were performed to study this corrosion mechanism.     

对话

正Héctor Esrawe毕业于墨西哥伊比利亚美洲大学,2003年创建Esrawe工作室,开始了他独立设计师的职业生涯。Esrawe工作室主要涉及博物馆、酒店、餐馆、酒吧、办公室、住宅的设计以及产品包括家具的创新与定制。Héctor Esrawe认为,设计是一个将使用者和周围环境相联系并发生生动对话的过程。在选材方面,他对玻璃、木材、金属和石材等情有独钟,同时对新工艺和新材料的探索也有着极大的热忱。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

波纹角对波纹竖板冷凝换热特性的影响

为了提高板式换热器的换热性能,探究换热板片的波纹角对波纹竖板冷凝侧换热特性的影响,优化其结构参数,采用建模计算的方法定量分析了波纹角对板片换热面积、液膜下落时间、流体努塞尔数、摩擦系数等参数的影响,并用可视化实验观察了不同波纹角下液膜流动路径的特点。分析结果表明,波纹角的变化对板片换热面积影响很小,可以忽略。波纹角越小,液膜下落时间越短,排液速度越快,液膜厚度越小,越有利于冷凝传热。波纹角越大,冷凝液的流动路径越接近波纹状流型,扰动越剧烈,增大了流体的雷诺数和努塞尔数,且雷诺数值越大,努塞尔数对波纹角的变化越敏感。流体与波纹板的摩擦系数也会随着波纹角的增大而增大,蒸气冷凝时产生的摩擦压降也越大。     

工程机械液压缸CAD关键技术研究

液压缸在工程机械领域应用非常广泛,主要起到液压传动作用。在液压缸的设计与生产中都需要广泛地采用计算机辅助设计即CAD技术,本文主要从六个方面进行CAD关键技术的细致分析。这六类关键技术的采用,可以有效地提高液压缸设计的效率。     

面向牙刷操作的Delta机器人设计与轨迹规划研究

结合牙刷自动化生产的需求,研究面向牙刷高速拾放操作的Delta机器人。简化Delta机器人的结构模型,研究机器人正运动学和逆运动学求解方法。分析牙刷上料的工作流程,确定机器人结构参数,设计机器人本体结构以及末端执行器。采用弧线过渡的门字形轨迹,基于3-4-5次多项式运动规律对机器人进行轨迹规划,利用ADAMS软件进行动力学仿真。结果表明,机器人末端的速度、加速度曲线连续,主动臂驱动力矩曲线连续无突变,满足牙刷生产中高速拾放操作的性能要求。     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

人纤维蛋白原对急诊外伤致创伤性凝血病疗效及相关因素分析

目的:探讨人纤维蛋白原(fibrinogen，FIB)对急诊创伤性凝血病患者的临床疗效及相关因素。方法:将2015年6月至2018年6月本院收治的100例严重创伤患者纳入本研究，根据是否创伤性凝血病分为凝血病组(80例)和非凝血病组(20例)。比较凝血病组和非凝血病组患者收住后第1个24 h的急性生理和慢性健康评分(acute physiology and chronic health evaluation II，APACHE II)、创伤严重程度评分(injury severity score，ISS)、低体温及低灌注发生率等指标。采用Logistic多因素回归方法分析严重创伤患者发生创伤性凝血病的相关因素。将80例创伤性凝血病患者随机分为观察组(40例)和对照组(40例)。对照组按照常规诊疗措施治疗，观察组在对照组处理基础上给予人FIB，比较治疗前后观察组和对照组的凝血功能指标，及治疗后的临床用血量、住院时间及病死率。结果:与治疗前相比，治疗后观察组和对照组的凝血酶原时间(prothrombin time，PT)、活化部分凝血活酶时间(activated partial thromboplastin time，APTT)及D-二聚体水平降低(P<0.05)，FIB水平明显升高(P<0.05)。观察组的红细胞(red blood cell，RBC) 输注量、新鲜冰冻血浆(fresh frozen plasma，FFP)输注量、重症加强护理病房(intensive care unit，ICU)时间及病死率均明显低于对照组，差异具有统计学意义(P<0.05)。创伤性凝血病患者PT>18 s(r=0.623，P=0.024)、APTT>60 s(r=0.722，P=0.018)、凝血酶时间(thrombin time，TT)>15 s(r=0.719，P=0.033)与ISS评分呈正相关。碱缺失(base deficit，BD)≥6(OR=3.678，95%CI=1.065～9.417)、格拉斯哥评分(Glasgow coma scale，GCS)≤8(OR=5.299，95%CI=1.122～8.711)和血小板(platelet，PLT)计数(OR=0.982，95%CI=0.971～0.996)是严重创伤患者发生创伤性凝血病的独立预测因素。结论:人FIB可有效改善创伤性凝血病患者的凝血功能，降低病死率、缩短ICU时间，创伤性凝血病与创伤严重程度、合并休克、低体温和重型颅脑损伤存在一定的相关性。     

低温氮、磁化综合处理钻头使用性能提高的X射线和电子显微技术分析研究

在地质钻探和石油钻井中,钻头都是非常重要的钻进工具。其技术特性,特别是硬度和耐磨性与钻探的技术经济指标,即与机械钻速、钻头进尺和每米钻探成本直接相关。为了提高钻头的工作性能,俄罗斯南方国立技术大学提出了综合低温淬火、磁化回火处理钻头的方法。经过综合处理后,钻头体、复合片底座和钎焊层的硬度分别提高了30%、3%和22%。野外钻进试验结果表明,经过低温液态氮和磁化综合处理的与未经综合处理的钻头相比,每次试验钻头进尺都有提高,总体上钻头进尺提高了22.2%,取得了很好的钻进效果。并对取得的效果进行了X射线和显微技术分析。