A new class of detail-preserving filters for image processing

A new class of median type filters for image processing is proposed. In the filters, linear FIR substructures are used in conjunction with the median operation. The root signals and noise attenuation properties of the FIR-median hybrid filters are analyzed and compared to representative edge preserving filtering operations. The concept of multilevel median operation is introduced to improve the detail preserving property of conventional median and the FIR-median hybrid filters. In the multilevel filters there exists a tradeoff between noise attenuation and detail preservation. The analysis and examples indicate that FIR-median hybrid filters preserve details better and are computationally much more efficient than the conventional median and the K-nearest neighbor averaging filters.     

Computation of surface orientation and structure of objects using grid coding

In this correspondence, algorithms are introduced to infer surface orientation and structure of visible object surfaces using grid coding. We adopt the active lighting technique to spatially ``encode' the scene for analysis. The observed objects, which can have surfaces of arbitrary shape, are assumed to rest on a plane (base plane) in a scene which is ``encoded' with light cast through a grid plane. Two orthogonal grid patterns are used, where each pattern is obtained with a set of equally spaced stripes marked on a glass pane. The scene is observed through a camera and the object surface orientation is determined using the projected patterns on the object surface. If the surfaces under consideration obey certain smoothness constraints, a dense orientation map can be obtained through proper interpolation. The surface structure can then be recovered given this dense orientation map. Both planar and curved surfaces can be handled in a uniform manner. The algorithms we propose yield reasonably accurate results and are relatively tolerant to noise, especially when compared to shape-from-shading techniques. In contrast to other grid coding techniques reported which match the grid junctions for depth reconstruction under the stereopsis principle, our techniques use the direction of the projected stripes to infer local surface orientation and do not require any correspondence relationship between either the grid lines or the grid junctions to be specified. The algorithm has the ability to register images and can therefore be embedded in a system which integrates knowledge from multiple views.     

新型陶瓷与熔融盐复合蓄热材料优化组合的数值模拟

将高温熔融盐相变蓄热材料和陶瓷固相蓄热材料进行复合 ,成功地研制成了能快速吸热和放热且蓄热密度高、蓄热量大的新型复合蓄热材料。分别以Al2 O3 ,MgO ,SiC为代表的陶瓷材料与 6 0LiF 40NaF ,5 0LiF 5 0KF ,6 0 .1NaCl 39.9MgCl2 ,LiH等为代表的 10余种高温熔融盐材料为复合研究对象 ,对复合蓄热材料的蓄热密度等与温度、复合材料中熔融盐的含量、材料种类间的关系进行了数值模拟研究 ,得到了对复合材料的优化设计具有指导意义的结论     

Al-Mg-Li系1420合金

对运输制造业和航空结构上应用的材料,密度和比弹性模量像强度一样都是重要的性能指标。为了降低铝的密度和提高它的比弹性模量添加锂和镁。因此,研究出含5.0～6.0％Mg,1.9～2.3％Li,0.09～0.15％Zr,0.1～0.3％Si;≤0.3％Fe,0.1％Ti,0.3％Mn,0.005％Na的铝基1420合金。该合金的强度与Al-     

高温钎料PdCu-Ti在氧化铝陶瓷上的润湿性及界面反应

本文采用座滴法试验研究了合金系统ＰｄＣｕ－Ｔｉ在Ａｌ２Ｏ３上润湿性的变化规律，探讨了界面冶金及结合等行为，运用热力学理论对结果进行了分析，随Ｔｉ含量的增加及Ｐｄ含量的减少润湿角逐渐降低，Ｔｉ的加入使界面发生了一个双重变化；液相侧富氧，钛吸收层的生成及随后的固相侧氧化钛的生成，只有界面上生成一氧化钛，才能有较好的润湿行为和较强的结合力。     

CrMoV钢时效前热处理对磷在晶界偏析的影响

含有0.04wt-％P的汽轮机转子用CrMoV钢,时效前在较高温度(600和570℃)进行预时效处理,然后在480℃时效,元素磷偏析到晶界的速度比没有经过预时效处理的钢快得多。这与预时效过程中碳化物析出,基体成分改变有关。Mo可抑制磷的偏析,但因时效过程中富Mo碳化物的生成和长大,使基体中Mo的含量降低,因此,磷从Mo的“束缚”下“解放”出来并偏析到晶界,使脆性转变温度升高,此外,碳化物的粗化也可能导致脆性转变温度升高。     

用氩气和氯气吹洗的方法从Al—Mg合金中除去钠

用5■公斤批量熔体研究了从Al—Mg合金中除钠,使之降到1ppm水平。采用了不同的方法:用叶轮机械搅拌;叶轮搅拌+MgCl_2盐覆盖;叶轮搅拌+惰性气体(氩气)吹洗,同时用盐覆盖或不用盐覆盖;叶轮搅拌,惰性气体+2％Cl_2吹洗。叶轮有一个单一的气体入口与空心轴相通。本试验给出了Na-时间关系曲线,它是用Na+1/2Cl_2=NaCl反应的化学计算法简单确定的。其理由是气泡熔体的接触面积足够大。在各个试验中发现镁都没有明显的去掉。如果接触面积不够大,除钠应该是由熔体中质量迁移起支配作用。文中也处理了这种情况的动力学。根据各种实验室的试验确定了顶部表面的质量迁移系数。在除去溶解氧的水模型试验中,测定了叶轮不同转速和气体不同流量下的接触面积。这些结果与带有多孔装置的化学工程系统有比较好的一致性。然而,不知道这些结果能否满意地推广到工业规模的装置上。