Preparation and characterization of Co-Ru/TiO2/MWCNTs electrocatalysts in PEM hydrogen electrolyzer

The subject of this study is preparation and characterization of hypo-hyper d-electrocatalysts with reduced amount of precious metals aimed for water electrolysis. The studied electrocatalysts contain 10% mixed metallic phase (Co:Ru = 1:1 wt., Co:Ru = 4:1 wt. and Co:Ru:Pt = 4:0.5:0.5 wt.), 18% TiO₂ as a crystalline anatase deposited on multiwalled carbon nanotubes (MWCNTs). Previously, MWCNTs were activated in 28% nitric acid. As a reference electrocatalyst for hydrogen evolution reaction, corresponding electrocatalysts with pure Pt metallic phase and mixed CoPt (Co:Pt = 1:1 wt.) metallic phase were prepared. Also, as a reference electrocatalyst for oxygen evolution reaction, electrocatalyst with pure Ru metallic phase was prepared.The prepared electrocatalysts were structurally characterized by means of XPS, XRD, TEM, SEM and FTIR analysis.Electrochemical characterization was performed by means of cyclic voltammetry and potentiodynamic method in the PEM hydrogen electrolyzer. The range of the catalytic activity for hydrogen evolution of studied electrocatalysts was the following: CoRuPt (4:0.5:0.5) > CoPt (1:1) > Pt > CoRu (1:1) > CoRu (4:1). The order of the catalytic activity for oxygen evolution was the following: CoRu (1:1) > Ru > CoRu (4:1) > Pt > CoRuPt (4:0.5:0.5) > CoPt (1:1).     

Photo-catalytic properties of silicon and its future in photovoltaic applications

With the possible depletion of fossil fuels in just one generation and the risk of eventual nuclear incidents, the question is whether renewable energy sources have the capacity to replace traditional ones. The availability of solar energy is significantly higher than any other renewable source and silicon is currently the major photo-catalytic material in the solar industry. Conversion efficiency and payback time are noted as key factors, besides atmospheric imperviousness, all of which affect usability of photo-catalytic material. The status and future of Si as a major candidate to take over from traditional sources of energy relies on cost reduction of the high purity Si used as feedstock for solar cell industry, reduced installation costs and network maintenance and development of the next generation of Si solar cells.     

Hydro energy potential of cooling water at the thermal power plant

The hydro energy of the gravity water flow from the coal-fired thermal power plant units to the river in an open cooling system of turbine condensers is determined. On the basis of statistical data for a long time period, the water net head duration curve due to the river annual level change, as well as the reduction of the hydro energy potential due to the thermal power plant overhauls periods, are evaluated in the case study of the Thermal Power Plant “Nikola Tesla B” in Serbia. A small hydro power plant is designed for the utilization of this hydro energy, and the economic benefits of the project are calculated. The internal rate of returns and pay back periods are calculated in dependence of the electricity price and total investment costs. The increase of profitability is assessed, bearing in mind that the plant might be realized as the Clean Development Mechanism project according to the Kyoto protocol. The obtained results show that the project is economically attractive, and it can be carried out with standard matured solutions of hydro turbines available at the market. Even for the relatively low electricity price from small hydro power plants in Serbia of 0.08 €/kW h the internal rate of return and the pay back period are 17.5% and 5.5 years.     

Analyzing XACML policies using answer set programming

International Journal of Information Security - With the tremendous growth of Web applications and services, eXtensible Access Control Markup Language (XACML) has been broadly adopted to specify...     

Marginal adaptation of composite resins under two adhesive techniques

In the present research, different adhesive techniques were used to set up fillings with composite resins. After the application of etch and rinse or self etch adhesive technique, marginal adaptation of composite fillings was estimated by the length of margins without gaps, and by the microretention of resin in enamel and dentin. The study material consisted of 40 extracted teeth. Twenty Class V cavities were treated with 35% phosphorous acid and restored after rinsing by Adper Single Bond 2 and Filtek Ultimate‐ASB/FU 3M ESPE composite system. The remaining 20 cavities were restored by Adper Easy One‐AEO/FU 3M ESPE composite system. Marginal adaptation of composite fillings was examined using a scanning electron microscope (SEM). The etch and rinse adhesive technique showed a significantly higher percentage of margin length without gaps (in enamel: 92.5%, in dentin: 57.3%), compared with the self‐etch technique with lower percentage of margin length without gaps, in enamel 70.4% (p < .001), and in dentin‐22.6% (p < .05). In the first technique, microretention was composed of adhesive and hybrid layers as well as resin tugs in interprismatic spaces of enamel, while the dentin microretention was composed of adhesive and hybrid layers with resin tugs in dentin canals. In the second technique, resin tugs were rarely seen and a microgap was dominant along the border of restoration margins. The SEM analysis showed a better marginal adaptation of composite resin to enamel and dentin with better microretention when the etch and rinse adhesive procedure was applied.     

Multiexcitonic dual emission in CdSe/CdS tetrapods and nanorods

CdSe/CdS semiconductor nanocrystal heterostructures are currently of high interest for the peculiar electronic structure offering unique optical properties. Here, we show that nanorods and tetrapods made of such material combination enable efficient multiexcitonic emission, when the volume of the nanoparticle is maximized. This condition is fulfilled by tetrapods with an arm length of 55 nm and results in a dual emission with comparable intensities from the CdS arms and CdSe core. The relative intensities of the dual emission, originating from exciton phase-space filling and reduced Auger recombination, can be effectively modulated by the photon fluence of the pump laser. The results, obtained under steady-state detection conditions, highlight the properties of tetrapods as multiexciton dual-color emitters.     

Efficiency of high‐order elements for continuous and discontinuous Galerkin methods

To evaluate the computational performance of high‐order elements, a comparison based on operation count is proposed instead of runtime comparisons. More specifically, linear versus high‐order approximations are analyzed for implicit solver under a standard set of hypotheses for the mesh and the solution. Continuous and discontinuous Galerkin methods are considered in two‐dimensional and three‐dimensional domains for simplices and parallelotopes. Moreover, both element‐wise and global operations arising from different Galerkin approaches are studied. The operation count estimates show, that for implicit solvers, high‐order methods are more efficient than linear ones. Copyright © 2013 John Wiley & Sons, Ltd.     

Forward Adaptive Logarithmic Quantizer with New Lossless Coding Method for Laplacian Source

The aim of this paper is to improve the G.711 standard, which is widely used, especially in the public switched telephone network (PSTN). Two solutions are proposed. The first solution uses only lossless coder, achieving a bit-rate decrease of 0.82 bits/sample, compared to the G.711 codec. The second solution uses forward adaptation and a lossless coder, further decreasing the bit-rate (by 1.25 bits/sample) and achieving higher average signal-to-quantization noise ratio (SQNR) in comparison with the G.711 codec. Also, the second solution is more robust than the G.711 codec, which means that it has near constant SQNR for a wide range of input signal power. That is very important for signals whose input power varies with time, such as speech and video signals. Our solutions are compatible with the G.711 codec, they have little additional complexity and delay and therefore can be applied in real-time systems, such as PSTN or VoIP. They can also be used in many other systems, such as WiMax and OFDM, as a replacement or improvement of the G.711 codec. Standardization process of the G.711.1 standard (which is a wide-band extension of the G.711 standard) is largely present. Our solutions fulfill all the requirements for that new standard; therefore they can be implemented in its low-frequency part.     

Design and characterization of a current sensing platform for silicon-based nanopores with integrated tunneling nanoelectrodes

Solid-state nanopores have been gaining popularity in nano-biotechnology for single molecule detection, in particular for label-free high-throughput DNA sequencing. In order to address the improvement of the resolution/speed trade-off critical in this application, here we present a new two-channel current amplifier tailored for solid-state nanopore devices with integrated tunneling electrodes. The simultaneous detection of ion and tunneling currents provides enhanced molecule tracking capability. We describe the system design starting from a detailed noise analysis and device modeling, highlighting the detrimental role of the conductive silicon substrate and of all the stray capacitive couplings between the electrodes. Given the high input capacitance (0.1–1 nF), the input voltage noise has been carefully minimized choosing a discrete couple of matched low-noise JFETs as input stage, thus achieving an equivalent input noise of 1.5 nV/√Hz (corresponding to a current noise floor of 15 fA/√Hz at 10 kHz). Low-noise performance (11 pA rms noise integrated over a 75 kHz bandwidth) is preserved at a wide bandwidth (300 kHz) and high gain (100 MΩ) thanks to the adoption of an improved integrator/differentiator cascade topology. Furthermore, along with biasing networks and selectable low-pass filters, an AC-coupled channel providing additional gain has been introduced in order to “zoom” in the current signature during pore blockade events. Together with an experimental characterization of the system (and comparison with the noise performance of other instruments), the platform is validated by demonstrating the detection of λ-DNA with 20 nm pores.