Predicting fully plastic mode II crack growth from an asymmetric defect

Asymmetrically cracked specimens fail with considerably less ductility than symmetrically cracked ones, due to the crack progressing along a shear band into pre-damaged material. A formulation for the accumulation of damage ahead of an asymmetric crack is presented, based on strain increments following a power law relation. These results are integrated both numerically and approximately.The crack growth per unit displacement increases approximately as the logarithm of the total crack advance per inclusion spacing , and varies inversely as the critical fracture strain c. This provides a basis for predicting large-scale, fully plastic fracture from asymmetric weld defects, using small-scale laboratory specimens.

---

Résumé Les éprouvettes fissurées de manière asymétrique se rompent avec beaucoup moins de ductilité que celles qui sont fissurées de manières symétrique, en raison du fait que la fissure se développe suivant une bande de cisaillement dans un matériau préendommagé. On Présente une formulation de l'accumulation du dommage en avant d'une fissure asymétrique, en se basant sur des gradients de déformations répartis selon une loi quadratique. L'interprétation des résultats est effectuée par voie numérique et par approximation.On constate que le croissance d'une fissure par unité de déplacement est sensiblement proportionnelle au logarithme de l'avancement total de la fissure rapporté à l'espacement entre deux inclusions , et en raison inverse de la déformation critique à la rupture c. Ceci fournt une base pour prédire une rupture à plus grande échelle et en conditions tout à fait plastiques, qui résulteront de défauts de soudage asymétriques, et ce en utilisant des éprouvettes réduites de laboratoire.

     

Ultrasonic crack characterization via a constrained inversion algorithm

The Kirchhoff approximation is used to show that the time domain impulse response of an isolated flat crack can be given a simple geometrical interpretation in terms of the derivative of a projected length function. For an elliptical crack, this derivative can be obtained explicitly to yield the two edge-diffracted waves which originate from the flashpoints of the crack. An explicit coordinate invariant expression is obtained from this elliptical crack solution which relates the time difference, t, between the arrival of these edge-diffracted waves and the crack size and orientation. Previously, we have proposed that this expression, together with t measurements in different scattering directions, could be used in a regression analysis as the basis for performing a constrained inversion of crack scattering data (i.e., where we attempt to obtain the best equivalent flat elliptical crack that fits the scattering measurements). Here we will demonstrate some results of applying the proposed algorithm using noisy synthetic data. The sensitivity of the results to both, number of measurements and transducer orientation, will be discussed.     

Textures in3He-A: Magnetic deformation in a narrow slab

A variational technique is used to analyze the deformed texture of superfluid³He-A in a narrow slab subject to a perpendicular magnetic field. Specific predictions are made for the anisotropy parameters and , averaged across the width.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

Hydrolytic degradation of ionically cross-linked polyphosphazene microspheres

The hydrolytic degradation of gel microspheres based on calcium cross-linked phosphazene polyelectrolytes, poly[di(carboxylatophenoxy)phosphazene] (PCPP) and poly[(carboxylatophenoxy) (glycinato)phosphazene] (PCGPP), was investigated. These microspheres are of importance as carriers in protein and cell encapsulation. Both PCPP and PCGPP ionotropic polyphosphazene hydrogels are degradable in an aqueous environment (pH 7.4, 37°C). The degradation rates can be increased by incorporation of hydrolysis sensitive glycinato groups as the pendant structures in the polymer (PCGPP). Hydrolysis of these polymer hydrogels led to low molecular weight (<1,000 Da) products. The erosion and molecular weight profiles varied also according to the molecular weight of the polyphosphazene constituting the gel beads. Another approach to affect the degradation rates consists of coating microspheres with poly-L -lysine. Ionotropic polyphosphazene hydrogels have potential as biodegradable devices for controlled drug delivery systems. © 1994 John Wiley & Sons, Inc.     

Ellipsoidal neighbourhood outlier factor for distributed anomaly detection in resource constrained networks

Anomaly detection in resource constrained wireless networks is an important challenge for tasks such as intrusion detection, quality assurance and event monitoring applications. The challenge is to detect these interesting events or anomalies in a timely manner, while minimising energy consumption in the network. We propose a distributed anomaly detection architecture, which uses multiple hyperellipsoidal clusters to model the data at each sensor node, and identify global and local anomalies in the network. In particular, a novel anomaly scoring method is proposed to provide a score for each hyperellipsoidal model, based on how remote the ellipsoid is relative to their neighbours. We demonstrate using several synthetic and real datasets that our proposed scheme achieves a higher detection performance with a significant reduction in communication overhead in the network compared to centralised and existing schemes.     

Data collection in global software engineering research: learning from past experience

Global Software Engineering has become a standard in today’s software industry. Research in distributed software development poses severe challenges that are due to the spatial and temporal distribution of the actors, as well as to language, intercultural and organizational aspects. These challenges occur in addition to “traditional” challenges of the domain itself in large-scale software projects, like coordination and communication issues, requirements volatily, lack of domain knowledge, among others. While several authors have reported empirical studies of global software development projects, the methodological difficulties and challenges of this type of studies have not been sufficiently discussed. In this paper, we share our experiences of collecting and analysing qualitative data in the context of Global Software Engineering projects. We discuss strategies for gaining access to field sites, building trust and documenting distributed and complex work practices in the context of several research projects we have conducted in the past 9 years. The experiences described in this paper illustrate the need to deal with fundamental problems, such as understanding local languages and different cultures, observing synchronous interaction, or dealing with barriers imposed by political conflicts between the sites. Based on our findings, we discuss some practical implications and strategies that can be used by other researchers and provide some recommendations for future research in methodological aspects of Global Software Engineering.     

Scandinavian Thins on Top of Cake: New and Improved Algorithms for Stacking and Packing

We show how to compute the smallest rectangle that can enclose any polygon, from a given set of polygons, in nearly linear time; we also present a PTAS for the problem, as well as a linear-time algorithm for the case when the polygons are rectangles themselves. We prove that finding a smallest convex polygon that encloses any of the given polygons is NP-hard, and give a PTAS for minimizing the perimeter of the convex enclosure. We also give efficient algorithms to find the smallest rectangle simultaneously enclosing a given pair of convex polygons.     

Engineering microfluidic papers: effect of fiber source and paper sheet properties on capillary-driven fluid flow

In the present study, we introduce a novel approach to control and modulate fluid transport inside microfluidic papers using lab-engineered paper sheets. Lab-sheets consisting of different fiber sources (eucalyptus sulfate and cotton linters pulp) and varying porosities were designed and further modified with small millimeter-scaled channels using hydrophobic barriers consisting of fiber-attached, hydrophobic polymers. The capillary-driven transport of an aqueous solution was monitored visually, and the influence of parameters such as fiber source, paper grammage, and channel width on the flow rates through the channel was investigated. The experimental results were compared with those obtained with commercially available filter papers. Our findings suggest that accurate control of fluid transport processes with standard filter papers is complex. Additionally, if the channel width is smaller than the mean fiber length, flow rates become dependent on the geometric parameters of the channel because of the formation of dead-end pores at the hydrophobic barriers. Finally, control of the paper sheets porosity, by varying the fiber density of the lab-made paper, affords the fabrication of chemically identical sheets whereby capillary flow is largely influenced and can be modulated accordingly by simple papermaking processes.     

Oxidation of pyrite in coal to magnetite

When bituminous coal is heated in an inert atmosphere (He) containing small amounts of oxygen at 393–455 °C, pyrite (FeS₂) in coal is partially converted to magnetite (Fe₃0₄). The maximum amount of Fe₃0₄ formed during the time of heating corresponds to 5–20% of the total pyrite present, depending on the coal sample. The magnetite forms as an outer crust on the pyrite grains. The fact that the magnetic properties of the pyrite grains are substantially increased by the magnetite crust suggests that pyrite can be separated from coal by use of a low magnetic field. In a laboratory test, 75% removal is obtained by means of a 500 Oe magnet on three samples, and 60% on a fourth sample.