Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

Utilizing CO₂ in an electro-chemical process and synthesizing value-added chemicals are amongst the few viable and scalable pathways in carbon capture and utilization technologies.CO₂ electro-reduction is also counted as one of the main options entailing less fossil fuel consumption and as a future electrical energy storage strategy.The current study aims at developing a new electrochemical platform to produce low-carbon e-biofuel through multifunctional electrosynthesis and integrated co-valorisation of biomass feedstocks with captured CO₂.In this approach,CO₂ is reduced at the cathode to produce drop-in fuels(e.g.,methanol)while value-added chemicals(e.g.,selective oxidation of alcohols,aldehydes,carboxylic acids and amines/amides)are produced at the anode.In this work,a numerical model of a continuous-flow design considering various anodic and cathodic reactions was built to determine the most techno-economically feasible configurations from the aspects of energy efficiency,environment impact and economical values.The reactor design was then optimized via parametric analysis.     

Improvement of porous polyvinylidene fluoride-co-hexafluropropylene hollow fiber membranes for sweeping gas membrane distillation of ethylene glycol solution

Porous polyvinylidene fluoride-co-hexafluropropylene (PVDF-HFP) hollow fiber membranes were fabricated through a wet spinning process. In order to improve the membrane structure, composition of the polymer solution was adjusted by studying ternary phase diagrams of polymer/solvent/non-solvent. The prepared membranes were used for sweeping gas membrane distillation (SGMD) of 20 wt% ethylene glycol (EG) aqueous solution. The membranes were characterized by different tests such as N₂ permeation, overall porosity, critical water entry pressure (CEP_w), water contact angle and collapsing pressure. From FESEM examination, addition of 3 wt% glycerol in the PVDF-HFP solution, produced membranes with smaller finger-likes cavities, higher surface porosity and smaller pore sizes. Increasing the polymer concentration up to 21 wt% resulted in a dense spongy structure which could significantly reduce the N₂ permeance. The membrane prepared by 3 wt% glycerol and 17 wt% polymer demonstrated an improved structure with mean pore size of 18 nm and a high surface porosity of 872 m^-1. CEP_w of 350 kPa and overall porosity of 84% were also obtained for the improved membrane. Collapsing pressure of the membranes relatively improved by increasing the polymer concentration. From the SGMD test, the developed membrane represented a maximum permeate flux of 28 kg·m^-2·h^-1 which is almost 19% higher than the flux of plain membrane. During 120 h of a long-term SGMD operation, a gradual flux reduction of 30% was noticed. In addition, EG rejection reduced from 100% to around 99.5% during 120 h of the operation.     

2-Hydroxy-1, 4-napthoquinone solubilization,thermodynamics and adsorption kinetics with surfactant

2-Hydroxy-1,4-napthoquinone(lawsone) natural red-orange dye was extracted from fresh henna(Lawsonia inermis) leaves in an alkaline media.The lawsone-surfactant solubilization constants(K_(LS))were calculated for the first time by using cationic cetyltrimethylammonium bromide(CTAB) and anionic sodium dodecyl sulphate(SDS).The standard free energy,concentration of solubilized lawsone and number of lawsone molecules solubilized into micelles were calculated and discussed.Surface excess,minimum surface area per molecule,surface pressure,free energy(adsorption and aggregation) and equilibrium constants of different states were determined from tensiometry.Different metal ions(Ag~+,Co~(2+),Cu~(2+),Ni~(2+),Fe~(3+),Zn~(2+) and Al~(3+)) were used to determine the complex forming ability with lawsone.Out of these,Ag~+ ions have strong binding capacity with lawsone.The adsorption of lawsone on the surface of glass with silver ions in presence of CTAB was also observed at pH 9.0.The pseudo-first, secondorder kinetic equation,intraparticles diffusion and Elovich models were used to determine the kinetics of lawsone adsorption onto the surface of glass and a probable mechanism has been discussed.Lawsone adsorption followed second-order kinetic equation(k_2=0.019 g·mg~(-1)·min~(-1)).     

Sulfamic acid functionalized slag for effective removal of organic dye and toxic metal from the aqueous samples

Surface functionalization of blast furnace slag with sulfamic acid(a zwitterion) was performed for the removal of Cr~(3+) and methylene blue dye(MB) from water samples. The slag functionalization process was optimized using Response Surface Methodology Design. Statistical analysis of the parameters that include the sulfamic acid amount(A), reaction time(B), and temperature(C) revealed that(A) increase had a negative effect on the adsorption of both pollutants by the zwitterion slag, whereas(B) and(C)increase presented a positive impact. At the optimum condition of 2 g sulfamic acid amount, 50 min reaction time and 37 °C temperature, the prepared slag showed a removal efficiency of more than 90% for both Cr~(3+) and MB. Surface characterization by SEM/EDS, FTIR, XPS and surface area analyser, showed an improvement in surface properties and the incorporation of zwitterionic NH_2~+ and S@O groups of sulfamic acid. Adsorption isotherm and kinetic studies conducted with the zwitterion slag showed the adsorption process was suited to Freundlich isotherm model and pseudo-second-order kinetic model.The thermodynamic study conducted revealed the spontaneity of the process based on the calculated negative DG(Gibb's free energy) values. The prepared zwitterion slag offered easy regeneration with dilute HCl solution and showed a considerable removal(Cr3+: 65% and MB: 80%) for both pollutants even after 3 cycles of usage.     

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

This study describes the adsorption behavior of three arylthiophene derivatives namely: 2-(4-amidino-3-fluorophenyl)-5-[4-methoxy phenyl] thiophene dihydrochloride salt (MA-1217), 2-(4-amidinophenyl)-5-[4-chlorophenyl] thiophene dihydrochloride salt (MA-1316) and 2-(4-amidino-3-fluorophenyl)-5-[4-chlorophenyl]thiophene dihydrochloride salt (MA-1312) at C-steel in 1.0 mol·L^-1 HCl interface using experimental and theoretical studies. Electrochemical and mass loss measurements showed that the inhibition efficiency (IE) of the arylthiophene derivatives increases with increasing concentrations and exhibited maximum efficiency 89% at 21×10^-6 mol·L^-1 (MA-1217) by mass loss method. The investigated arylthiophene derivatives obey the Langmuir adsorption isotherm. From polarization studies the arylthiophene derivatives act as mixed-type inhibitors. Surface analysis were carried out and discussed. The mode of orientation and adsorption of inhibitor molecules on C-steel surface was studied using molecular dynamics (MD) simulations. Quantum chemical parameters as well as the radial distribution function indices and binding energies confirm the experimental results.     

Laser particles with omnidirectional emission for cell tracking

The ability to track individual cells in space over time is crucial to analyzing heterogeneous cell populations.Recently,microlaser particles have emerged as unique optical probes for massively multiplexed single-cell tagging.However,the microlaser far-field emission is inherently direction-dependent,which causes strong intensity fluctuations when the orientation of the particle varies randomly inside cells.Here,we demonstrate a general solution based on the incorporation of nanoscale light scatterers into microlasers.Two schemes are developed by introducing either boundary defects or a scattering layer into microdisk lasers.The resulting laser output is omnidirectional,with the minimum-to-maximum ratio of the angle-dependent intensity improving from 0.007(-24 dB)to>0.23(-6dB).After transfer into live cells in vitro,the omnidirectional laser particles within moving cells could be tracked continuously with high signal-to-noise ratios for 2 h,while conventional microlasers exhibited frequent signal loss causing tracking failure.     

阿钦斯克氧化铝联合企业采用无污水排泄的供水系统

阿钦斯克氧化铝联合企业大多数生产部门都是用水大户。全苏铝镁设计研究院所做的设计中规定主要生产部门采用循环供水。循环供水系统(第一、第二集水站中的水)含有一定     

三水铝石与一水软铝石的自行析出

当把浓铝土矿矿浆加热到160℃时,一水软铝石即析出,并在溶出阶段的热交换器器壁上结疤。在赤泥分离状态下,三小铝石便析出在不含一水软铝石的赤泥里。只有一水软铝石存在于赤泥中,始能析出。在赤泥中含有各种矿物时,针铁矿会对三水铝石的析出显示出最大的种子作用。钙的各种化合物都能控制三水铝石的析出,但不能控制一水软铝石的析出。     

大型铝电解槽停槽后的起动工艺

铝厂生产过程中,由于某些原因供电可能突然中断,引起电解槽事故断电或停槽。而用已知的通电焙烧和二次起动电解槽的方法,即使对中型电解槽,工作量也是非常大的。