Experience with the preconstruction of thawing of soils in the foundation bed of the main building of the Neryungrinsk state area power plant

Conclusions 1. The scheme that we developed is efficient and ensures thawing over a period of 40–45 days. 2. To accelerate thawing by 8–10 days when using two electric heaters in each hole, it is necessary to raise the heaters by 3–4 m after 25 days and continue thawing. 3. An 8–10-day reduction in the thaw time is also possible by using three 1.25-kW electric heaters in each hole in place of two heaters of the same capacity, installing them at depths of 20, 14, and 8 m from the surface. Taking the results of the experimental work account, the State Institute for Special Design developed a plan for the production preconstruction thawing of soils over a area of 12,380 m². The volume of soil thawed was 324,400 m³. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 3, pp. 7–8. May–June, 1982.     

Probabilistic calculation for the bed under an individual foundation in accordance with the second group of limiting states

Conclusions 1. The method proposed for the probabilistic design of beds makes it possible to obtain a well-founded design solution corresponding to a given reliability level, which, in many cases, is more economic than the solution recommended in the Construction Rules and Regulations. 2. The design solution adopted as a result of the calculation set forth in the Construction Rules and Regulations possesses a reliability level, which, for some unknown reason, is on the high side. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, pp. 18–20, March–April 1991.     

Elastoplastic finite-element analysis of the bearing capacity of beds of reconstructed entities

A method is presented for determination of the coefficients that take into account the increase in angle of internal friction and specific cohesion of silty-clayey soils in predicting variation in the bearing capacity of beds after the long-term effect of the consolidating service-induced loads. __________ Translated From Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, Pp. 18–21, March–April, 2007.     

SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

Biofilm quantification on stone surfaces: comparison of various methods

In the present study, the efficacy of three different methods of estimating biofilm biomass on stone (amount of chlorophyll a, fluorescein diacetate hydrolysis and changes in colour) is discussed. Stone samples were sprayed with solutions of cyanobacteria and the actual microbial biomass--determined by cell culture--was compared with the biomass estimated using the different methods. Statistically significant differences between actual biomass and that estimated from the fluorescein diacetate hydrolysis method invalidate its use. However, although the results indicated the amount of chlorophyll to be a good estimator of biofilm biomass, problems in the total extraction of chlorophyll from the stone cannot be overlooked. Determination of changes in colour was found to be a good method of quantifying biofilms growing on stone.     

Mechanical behavior of micaceous clays

This study aims to investigate the effect of mica content on the mechanical properties of clays.Commercially available ground mica was blended with a locally available clayey soil,at varying nica contents by mass of 5%,10%,15%,20%,25% and 30%,to artificially prepare various micaceous clay blends.The preliminary testing phase included consistency limits and standard Proctor compaction tests.The primary testing program consisted of unconfined compression(UC),direct shear(DS) and scanning electron microscopy(SEM) tests.The test results showed that the liquid and plastic limits exhibited a linear,monotonically increasing trend with increase in mica content.The rate of increase in the plastic limit,however,was found to be greater than that of the liquid limit,thereby leading to a gradual transition towards a non-plastic,cohesionless character.The soft,spongy fabric and high water demand of the mica mineral led to higher optimum water contents and lower maximum dry unit weights with increasing mica content.Under low confinement conditions,i.e.the UC test and the DS test at low normal stresses,the shear strength was adversely affected by mica.However,the closer packing of the clay and mica components in the matrix under high confinement conditions offsets the adverse effects of mica by inducing frictional resistance at the shearing interface,thus leading to improved strength resistance.     

Radionuclide contamination of foods imported into Iraq following the Chernobyl nuclear reactor accident

Since early 1986, a monitoring program for radionuclides in imported foods has been carried out by the Iraqi Atomic Energy Commission. After the Chernobyl nuclear reactor accident in the Soviet Union, the program was expanded; our laboratory was officially designated by the Iraqi Government to measure radionuclide activity concentrations in foodstuff imported from countries known to be severely contaminated by Chernobyl radioactive fallout. Gamma-spectrometric analysis was used. Food items such as powdered milk, lamb meat, poultry, cereals and grains imported into Iraq before the Chernobyl accident did not contain any detectable fission products. However, all lamb meat, 81% of the lentil, 44% of the powdered milk and chick-pea, and 17% of the roast beef samples were contaminated with 137Cs or 134Cs and 137Cs. The highest 137Cs contamination levels found were 82, 147, 420, 6 and 4 Bq kg-1, respectively. Contamination by 134Cs was approximately 50% of the values given above.     

The acute effect of bunker C oil and an oil dispersant on: 1 Serum glucose, serum sodium and gill morphology in both freshwater and seawater acclimated rainbow trout (Salmo gairdneri)

Bunker C oil and an oil dispersant were tested for physiological stress on both freshwater and saltwater acclimated rainbow trout. Both compounds tended to reduce serum glucose levels with Bunker C causing the more significant decrease (P < 0.08), indicating a possible dysfunction of the kidney. The freshwater treatment group showed a significant decrease in sodium levels (P < 0.01) when treated with a dispersant, while under similar conditions, saltwater acclimated fish show a very marked increase in serum sodium concentrations (P < 0.025). Those fluctuations in sodium levels are resultant from direct interference with the energy activated sodium transport systems of the gills. Microphotographs of gill filaments and lamellae show severe damage caused by the dispersant and dispersant/oil mixture with less impairment resultant from Bunker C exposure.