添加钛对Al—Zn—Mg合金时效特性的影响

往Al-Zn-Mg合金中添加微量钛(0.04％),以便确定钛对这种合金的显微组织和时效特性的影响。发现钛能延迟析出动力学,并且在空气淬火时,能阻止溶质在晶界上偏析。低于G.P.区溶解温度,合金的硬化是由于形成位错环和G.P.区。超过G.P.区的溶解温度,硬化仅仅是由于形成析出物。这些结果用钛能降低溶质原子—空位集团的形成,以及引起锌和镁迁移率降低来解释。     

REACTIVE DIFFUSION BETWEEN Si AND NbC AT 1300℃

ＲＥＡＣＴＩＶＥＤＩＦＦＵＳＩＯＮＢＥＴＷＥＥＮＳｉＡＮＤＮｂＣＡＴ１３００℃Ｃ．Ｒ．Ｋａｏ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｃａｌＥｎｇｉｎｅｅｒｉｎｇＮａｔｉｏｎａｌＣｅｎｔｒａｌＵｎｉｖｅｒｓｉｔｙＣｈｕｎｇＬｉ，Ｔａｉｗａｎ）Ｊ．Ｗｏｏｄｆ...     

球状及蠕虫状石墨铸铁中石墨形成过程的观察

引言蠕虫状石墨铸铁的发展又进一步引起人们去研究铸铁的结晶过程以及了解那些在凝固过程中控制石墨生长形态的诸因素。一般认为蠕虫状石墨的形成是因为球状石墨衰退的结果,然而,蠕虫状石墨的生长模式却可能是更加接近片状石墨。对石墨的形核和长大过程的直接观察目前尚还不可能。因而对铸铁凝固早期各种形态石墨的研究一直进行得还不够充分。已有的研究表明球化剂的脱氧和脱硫作用改变了铁水和石墨的介面能,这对石墨的生长     

铝合金电磁铸造能力在扩大

一、前言采用瑞士铝业公司的电磁铸造技术已能生产大规格的硬合金铸锭。该工艺包括众所周知的电磁铸造以及使用含有CO_2的水冷却和刮除铸锭上的水,以控制熔体的冷却和金属凝固过程。这种技术使铸锭在铸造过程中得到热处理,从而减少了传统的不均匀冷却造成的应力。     

Energy-efficient control of nanosatellites during distributed region formation flying

In this paper, we present an energy-efficient method for distributed region formation flying of nanosatellites. The proposed framework consists of two concurrent sub-schemes that include estimation and formation. In the estimation sub-scheme, unlike the existing methods on satellite formation flying, that assume the availability of the reference orbital elements to all followers, here, a distributed estimator is developed so that the follower nanosatellites estimate the position of the leader in its orbital slot. In the formation sub-scheme, we consider a region formation strategy which is an efficient method in dealing with the formation of a large number of nanosatellites. We propose an optimal region following formation method based on the receding horizon control (RHC) using the estimated reference orbital elements. Subsequently, an algorithm is presented to solve the proposed energy-efficient formation flying method. Finally, the simulation result is presented that illustrates the purposed method improves the power consumption for each nanosatellite with respect to the existing non-optimal region formation flying controllers.     

Editorial

Nowadays control systems can find applications in many areas, like aerospace, motion tracking, chemical engineering, physics, biology, economics. To improve control performance is a perpetual goal. With recent progresses of computing technologies, better control performance can be achieved by more judicious control strategies based on more precise and more complicated, such as time-varying, nonlinear, models. Another trend to improve control performance is built upon the divide-and-conquer philosophy, i.e., a complicated control task is cooperatively accomplished by multiple controllers/agents, instead of a single super-powerful controller. This trend is made possible due to great advances in communication, which enable the information exchange among agents and may unite the less powerful agents. The cost for such control performance improvement is higher spatial complexity of control systems. Although high model complexity and spatial complexity can be physically handled by current powerful controllers/agents, the lack of efficient analysis and synthesis methods prevents the performance improvement of control systems with high model or/and spatial complexity. As we know, conventional control methods are mainly developed under the assumptions of linear, time-invariant and centralized models. In order to resolve the issues due to the aforementioned two types of complexities, new methods are expected, which is exactly the major aim of the present special issue.     

Note: Simultaneous electrical and optical detection of expanding dense partially ionized vapour clouds

The scheme and construction of an electro-optical probe able to collect charge and detect optical emission from expanding dense partially ionized vapour clouds are reported. The instrument can be applied to phenomena such as dust impact ionization and solid target laser ablation. First, results of measurements of expanding plasma cloud formed upon ablating W target are presented. Use of the instrument in different experimental facilities, including tokamak, is discussed.     

Note: The intermodulation lockin analyzer

Nonlinear systems can be probed by driving them with two or more pure tones while measuring the intermodulation products of the drive tones in the response. We describe a digital lockin analyzer which is designed explicitly for this purpose. The analyzer is implemented on a field-programmable gate array, providing speed in analysis, real-time feedback, and stability in operation. The use of the analyzer is demonstrated for intermodulation atomic force microscopy. A generalization of the intermodulation spectral technique to arbitrary drive waveforms is discussed.     

Floc architecture of bioflocculation sediment by ESEM and CLSM

Sediment flocculation is a critical component for the understanding of cohesive sediment dynamics. Traditionally, the referred study has largely been devoted to forming mechanism, influencing factors and physicochemical sediment conditions of all kinds of organic-flocculation and inorganic-flocculation. However, during the last decade, the bioflocculation of sediment by biological activity has been given increasing attention. But most studies have focused on the interrelations between biological and sedimentological variables. With the assistance of a newly developed field kit and correlative microscopy (which includes environmental scanning electron microscopy and confocal laser scanning microscopy), this article begins to bridge the resolution gap between sediment particles and biological activities as well as its metabolic products biofilm, in order to better understand the role of polymeric material biofilm in floc ultrastructure and outward floc behavior of bioflocculation sediment. Results have demonstrated that bioflocculation sediment was observed to be composed of complex networks of biofilm and appeared to be of complicated physical floc structures. The biofilm was found to embed particles and permeate the void space, representing the dominant physical bridging mechanism of the flocs and contributed to the extensive surface area, architecture characteristics, and mechanical properties of bioflocculation sediment.     

Pressure waves in the aorta during isolated abdominal belt loading: the magnitude, phasing, and attenuation

While rupture of the aorta is a leading cause of sudden death following motor vehicle crashes, the specific mechanism that causes this injury is not currently well understood. Aortic ruptures occurring in the field are likely due to a complex combination of contributing factors such as acceleration, compression of the chest, and increased pressure within the aorta. The objective of the current study was to investigate one of these factors in more detail than has been done previously; specifically, to investigate the in situ intra-aortic pressure generated during isolated belt loading to the abdomen. Ten juvenile swine were subjected to dynamic belt loads applied to the abdomen. Intraaortic pressure was measured at multiple locations to assess the magnitude and propagation of the resulting blood pressure wave. The greatest average peak pressure (113.6 +/- 43.5 kPa) was measured in the abdominal aorta. Pressures measured in the thoracic aorta and aortic arch were 70 per cent and 50 per cent, respectively, that measured in the abdominal aorta. No macroscopic aortic trauma was observed. To the authors' knowledge the present study is the first one to document the presence, propagation, and attenuation of a transient pressure wave in the aorta generated by abdominal belt loading. The superiorly moving wave is sufficient to generate hydrostatic and intimal shear stress in the aorta, possibly contributing to the hypothesized mechanisms of traumatic aortic rupture.