A technique for assessment of torso kinesiology

A technique is described for monitoring and analysis of the angular displacement of the human torso. The technique is based on the use of miniature electromechanical inclinometers and video recording. The system was developed for continuous measurement of the angular displacement of spinal segments in the sagittal plane during all stages of lifting. Angular displacements of the cervical, thoracic and lumbar regions were obtained from a dynamic lifting case study using a digital processing system. The geometrical changes of the torso during five prescribed stages were measured. The system revealed good accuracy with high correlation coefficient scores for a wide range of lifting tasks in a comparative laboratory study. This paper describes the monitoring technique; the system's advantages, disadvantages and measuring accuracy are discussed.     

Prevention of dark-cutting (DFD) beef in penned bulls at the abattoir

There is a large body of evidence indicating that activities associated with regrouping of bulls before slaughter, which leads to physical exhaustion mainly from mounting, are primary factors inducing dark-cutting (DFD) in beef. The aim of this study was to test several methods to control activity when regrouping cannot be avoided. Fifty bulls previously individually tied for at least 16 months were drafted into groups of five animals and released in a pen at the abattoir. After 18 to 22 h they were slaughtered. According to environmental conditions in the pen, the bulls were divided into four groups: Control group (n = 10, no experimentation); Electricity group (n = 10, an electric fence was constructed above the pen so that a mounting bull would receive an electric shock); Darkness group (n = 10, the whole stall was in darkness); and Combination group (n = 20, both treatments, of the electricity and darkness groups were applied). During the first hour of penning the behaviour of the bulls was videorecorded. After slaughter meat quality characteristics were measured. Dark-cutting was found in Control (70%), Electricity (30%) and Darkness (70%) groups, but not in the Combination group (0%). No treatment altered the repertoire of agonistic activity, but under the combined treatments the number of agonistic interactions was significantly lower than in any other group.     

Blood flow images by a SAW-based multigate Doppler system

Multigate operation of an ultrasound pulsed Doppler flowmeter, providing Doppler frequency detection in a number of adjacent sample volumes, is capable of displaying the instantaneous blood velocity distribution along the cross section of a sonified vessel. Real-time serial Doppler processing of 32 range cells has been implemented in a novel system using fast spectral analysis based on surface-acoustic wave (SAW) dispersive filters. The basic architecture and first in vitro experiments were reported previously. The in vivo application of the system is described here, and images of human carotid artery and jugular vein are presented. Appropriate display formats are introduced to use the great amount of information known on spatial and temporal behavior of flow profiles. Digital postprocessing of spectral Doppler data allows velocity profiles to be displayed at selected times to correlate spatial and temporal evolution. A color code can be used to represent different velocity strengths. The potential application of the system to two-dimensional (2-D) flow imaging is discussed.     

Tunable microwave resonators and oscillators using magnetostatic waves

The status of magnetostatic wave (MSW) straight-edge resonators (SERs) and their applications in tunable oscillator circuits are reviewed. The resonators are based on magnetostatic waves propagating in high-Q cavities fabricated in thin ferrimagnetic yttrium iron garnet (YIG) films. The resonance frequency of these resonators can be tuned using a bias magnetic field. The theory of operation and design criteria for the straight-edge resonators are described with emphasis on the effect of the resonator parameters on the tuning range, power handling, and phase noise performance. The use of the SER as the frequency-selective element in oscillator circuits is reported. Examples of tunable oscillators are included.     

Appropriate technology for manufacturing: Some management issues

This paper introduces the idea of appropriate technology and applies it to the choices organisations make when designing, implementing and managing advanced manufacturing technologies. Five sets of choices are considered: the type and level of technology; the allocation of functions between humans and machines; the role of humans in advanced systems; the organisation structures to support them; and the ways in which people participate in their design. The paper concludes that most organisations are not effective at developing and implementing appropriate technologies, and that ergonomists have failed to meet the needs of technologies and managers in these areas.     

Synchronous dynamic focusing for ultrasound imaging

An approach to dynamic focusing of ultrasound linear array scanners is presented, leading to the unique capability of implementing a focus that continuously tracks the return signal along the penetration depth. An electronically variable lens is obtained by a heterodyning process, in which the phases of echo signals at the array elements are equalized by mixing with suitable reference oscillations. These are generated by control of a single voltage-controlled oscillator, whose frequency is properly varied in synchronism with the delay of signal from different depths. The technique has been experimentally demonstrated by modifying the focusing processor of a conventional echographic linear scanner. Superior performances have been obtained with respect to fixed-focus operation mode. The image quality results are comparable with those of multizone-focus operation mode, in which the focus is varied over more transmit/receive cycles at the expense of lower frame rate.     

Standing up to the big squeeze

Consumer confidence is at its lowest ebb since 1980. Economic growth is at a standstill & unemployment & inflation are both rising. Here's a front-line report from more than three dozen operators who are fending off the recession's dual pressures of slow sales & rising costs. They are using discount pricing, partnering with vendors, setting pay for performance standards & a variety of other recession-beating practices.     

Identification and evaluation of volatile compounds of vacuum and modified atmosphere packaged beef strip loins

Beef strip loins were packaged and stored for up to 28 days at 3°C in high-oxygen barrier film under vacuum and in 100% CO(2), 40% CO(2)/60% N(2) and 20% CO(2)/80% O(2). As storage progressed, loins packaged and stored in 20% CO(2)/80% O(2) developed strong off-odors. 1-hexene, methyl thiirane, ethyl acetate, benzene and 1-heptene were detected in these packaged loins beginning at 7 to 14 days of storage. With the exception of 1-hexene, these compounds were not consistently detected in loins stored in vacuum, in 100% CO(2), or in 40% CO(2)/60% N(2), and these packaged loins developed much less off-odor during storage than loins packaged and stored in 20% CO(2)/80% O(2). A large number of volatile compounds from the headspace of the packaged loins originated from the packaging material. Lactobacillus plantarum became the dominant flora on loins stored under vacuum and under 40% CO(2)/60% N(2) while Leuconostoc mesenteroides subsp. mesenteroides predominated in loins stored in 100% CO(2). Pseudomonas putida eventually dominated on loins stored in 20% CO(2)/80% O(2).     

Extraction technique for the determination of oxygen-18 in water using preevacuated glass vials

The need for a rapid, inexpensive technique for routine 18O/16O extraction from water has arisen recently through applications in the medical sciences and in hydrology. The traditional experimental technique for determining the oxygen isotope composition of water, the CO2-H2O equilibration method, is tedious, time consuming, and involves the use of custom-made glass apparatus. Furthermore, because of potential memory effects from one sample to the next, the glassware needs to be thoroughly cleaned between runs. A few attempts have been made to improve upon the method. Attempts to analyze water directly in the source of the mass spectrometer produced large memory effects and questionable results. Commercially available apparatus for automated extraction of 18O/16O from water is generally prohibitively expensive and often is designed to interface only with the manufacturer's own mass spectrometer. The method described in this paper utilizes inexpensive, off-the-shelf, preevacuated, glass vials. Preevacuated vials have been used by others for the isotopic analysis of breath CO2 and are well tested. The vials can be purchased in bulk from scientific apparatus suppliers at a relatively low cost. These are coupled with a simplified extraction line consisting of a stainless steel syringe needle and a glass cold trap. Vials are filled with CO2 and H2O and shaken in a constant-temperature water bath for at least 90 min. Since the vials are discarded after use, no cleaning is necessary, essentially eliminating any memory effect. Reproducibility is generally better than +/- 0.05%. The only reagents required are gaseous CO2 for equilibration, a dry ice/alcohol mixture for trapping water, and liquid nitrogen for transferring the CO2.