Improving Radio Frequency Transmission Properties of Graphene via Carrier Concentration Control toward High Frequency Transmission Line Applications

Graphene has been gradually studied as a high‐frequency transmission line material owing to high carrier mobility with frequency independence up to a few THz. However, the graphene‐based transmission lines have poor conductivity due to their low carrier concentration. Here, it is observed that the radio frequency (RF) transmission performance could be severely hampered by the defect‐induced scattering, even though the carrier concentration is increased. As a possible solution, the deposition of the amorphous carbon on the graphene is studied in the high‐frequency region up to 110 GHz. The DC resistance is reduced by as much as 60%, and the RF transmission property is also enhanced by 3 dB. Also, the amorphous carbon covered graphene shows stable performance under a harsh environment. These results prove that the carrier concentration control is an effective and a facile method to improve the transmission performance of graphene. It opens up the possibilities of using graphene as interconnects in the ultrahigh‐frequency region.     

高效率窄线宽光纤激光器

本文报道了一种环形腔掺饵光纤激光器，得到了泵浦效率高达22.6%，输出线宽小于0.1nm的激光输出。     

A novel ultracompact two-mode-interference wavelength division multiplexer for 1.5-/spl mu/m operation

A novel ultracompact 2/spl times/2 wavelength division multiplexer (WDM) for 1.55-/spl mu/m operation based on highly dispersive two-mode interference (TMI) was designed, theoretically modeled, and verified using a finite-difference-time-domain (FDTD) method. A two-moded waveguide assisted with a dispersive tooth-shaped grating provided a mode-dependent reflection band of central wavelength at 1.55 /spl mu/m. The wavelengths of 1538 and 1572 nm that were at the band edges and had the lowest reflection losses and relatively high dispersion were selected for wavelength multiplexing. The result showed that the wavelengths were separated by grating dispersion in a coupler length of 75 /spl mu/m which was much shorter than the required length of 1.1 mm in a regular TMI multiplexer of no grating. Insertion loss of about 1.7 dB and channel contrast of about 12 dB were achieved.     

Small-signal substrate resistance effect in RF CMOS cascode amplifier

With common-source RF application amplifier, it is well known that the small substrate resistance helps to improve the output resistance as well as the transconductance. This idea can be easily extended to all CMOS transistors in RF applications. However, with cascode amplifier at high frequencies, the maximum available gain, noise figure minimum, and the tuned output impedance are improved by increasing the substrate resistance of the common-gate transistor, so that the range of operational frequency can be extended. These contradicting phenomenons between the common-source and common-gate topology can be explained theoretically, and the supporting measurement results are presented base on a 0.35 /spl mu/m CMOS technology.     

Magnetically Guidable Proteinaceous Adhesive Microbots for Targeted Locoregional Therapeutics Delivery in the Highly Dynamic Environment of the Esophagus

The esophagus is a tubular-shaped muscular organ where swallowed fluids and muscular contractions constitute a highly dynamic environment. The turbulent, coordinated processes that occur through the oropharyngeal conduit can often compromise targeted administration of therapeutic drugs to a lesion, significantly reducing therapeutic efficacy. Here, magnetically guidable drug vehicles capable of strongly adhering to target sites using a bioengineered mussel adhesive protein (MAP) to achieve localized delivery of therapeutic drugs against the hydrodynamic physiological conditions are proposed. A suite of highly uniform microparticles embedded with iron oxide (IO) nanoparticles (MAP@IO MPs) is microfluidically fabricated using the genipin-mediated covalent cross-linking of bioengineered MAP. The MAP@IO MPs are successfully targeted to a specific region and prolongedly retained in the tubular-structured passageway. In particular, orally administered MAP@IO MPs are effectively captured in the esophagus in vivo in a magnetically guidable manner. Moreover, doxorubicin (DOX)-loaded MAP@IO MPs exhibit a sustainable DOX release profile, effective anticancer therapeutic activity, and excellent biocompatibility. Thus, the magnetically guidable locomotion and robust underwater adhesive properties of the proteinaceous soft microbots can provide an intelligent modular approach for targeted locoregional therapeutics delivery to a specific lesion site in dynamic fluid-associated tubular organs such as the esophagus.     

Few‐Layered WS2 Nanoplates Confined in Co,N‐Doped Hollow Carbon Nanocages: Abundant WS2 Edges for Highly Sensitive Gas Sensors

Edges of 2D transition metal dichalcogenides (TMDs) are well known as highly reactive sites, thus researchers have attempted to maximize the edge site density of 2D TMDs. In this work, metal‐organic framework (MOF) templates are introduced to synthesize few‐layered WS₂ nanoplates (a lateral dimension of ≈10 nm) confined in Co, N‐doped hollow carbon nanocages (WS₂_Co‐N‐HCNCs), for highly sensitive NO₂ gas sensors. WS₂ precursors are assembled in the surface cavity of Co‐based zeolite imidazole framework (ZIF‐67) and subsequent pyrolysis produced WS₂_Co‐N‐HCNCs. During the pyrolysis, the carbonized ZIF‐67 are doped by Co and N elements, and the growth of WS₂ is effectively suppressed, creating few‐layered WS₂ nanoplates functionalized Co‐N‐HCNCs. The WS₂_Co‐N‐HCNCs exhibit outstanding NO₂ sensing characteristics at room temperature, in terms of response (48.2% to 5 ppm), selectivity, response and recovery speed, and detection limit (100 ppb). These results are attributed to the enhanced adsorption and desorption kinetics of NO₂ on abundant WS₂ edges, confined in the gas permeable HCNCs. This work opens up an efficient way for the facile synthesis of edge abundant few‐layered TMDs combined with porous carbon matrix via MOF templating route, for applications relying on highly active sites.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

GaAs衬底上β-Ga2O3纳米点阵薄膜的MOCVD制备

将热氧化与MOCVD工艺相结合,总结了一种在本征GaAs衬底上进行β-Ga₂O₃纳米点阵薄膜制备的工艺,该工艺不涉及金属催化剂与复杂刻蚀,工艺更为简单。使用扫描电子显微镜对所制备薄膜的形貌特征进行了表征与分析,发现所制备的纳米点阵薄膜呈现五方的柱状结构。对所制备样品进行了X射线衍射、拉曼振动、光致发光谱的测试,结果表明薄膜的晶体质量随着MOCVD生长温度与Ⅵ/Ⅲ比的提高而得到优化。使用有限元法（FEM）仿真验证了β-Ga₂O₃纳米点阵薄膜制备的高陷光特点。     

Condensation Induced Delamination of Nanoscale Hydrophobic Films

Vapor condensation is a crucial phenomenon governing the efficiency of many processes. In particular, dropwise condensation on hydrophobic thin films (≈100 nm‐thick) has the potential to achieve remarkable heat transfer. However, the lack of durability of these thin films has limited applications for a century. Although degradation due to steam condensation has been described as “blistering,” no satisfactory insight exists capable of elucidating the driving force for film delamination. Here, it is shown that nanoscale pinholes in hydrophobic films are the source of blister formation. By creating artificial pinholes via nanoindentation on thin (30 to 500 nm‐thick) fluorinated hydrophobic films, it is demostrated that water blisters can be initiated at the pinholes during condensation. It is experimentally demonstrated that vapor is transferred to the blister through the nanoscale pinhole, and the driving force for delamination is capillary pressure generated at the pinhole by the pinned liquid–vapor interface. The techniques and insights presented here will inform future work on polymeric thin film and enable their durable design for a variety of applications.