Non-Fourier heat conduction in a thin gold film heated by an ultra-fast-laser

Based on the dual-phase-lagging(DPL)heat conduction model,the Cattaneo-Vernotte(CV)model and the improved CV model we investigate the one-dimensional heat conduction in gold films with nano-scale thickness exposed to an ultra-fast laser heating.The influence of system parameters on the temperature field is explored.We find that for all the non-Fourier heat conduction models considered in this work,a larger Knudsen number normally leads to a higher temperature.For the DPL model,the large ratio of the phase lag of temperature gradient to the phase lag of heat flux reduces the maximum temperature and shortens the time for the system to reach its steady state.The CV model and the improved CV model lead to the similar thermal wave behavior of the temperature field,but the thermal wave speeds for these two models are different,especially for large Knudsen numbers.When the phase lag of temperature gradient is smaller,the difference between the DPL model and the improved CV model is not significant,but for the large phase lag of temperature gradient the difference becomes quite significant,especially for the large Knudsen number.In addition,the effect of the surface accommodation coefficient,which is a parameter in the slip boundary condition,on the temperature field of the gold film heated by ultra-fast laser pulses is investigated based on the DPL model.     

双回转送进二辊冷轧管机凸轮设计研究

本文提出了双回转送进二辊冷轧管机凸轮理论轮廓曲线的新设计方法 ,其轮廓曲线加速度与跃度呈梯形 ,且跃度边界连续 ,给出了针对双回转送进二辊冷轧管机的两个过渡段具有等加速度和跃度的设计准则     

时效对接触线用Cu-Ag-Cr合金性能的影响

分析了固溶温度、时效及时效前冷变形量对Cu - 0 1 %Ag - 0 1 %Cr接触线用合金性能的影响 ,结果表明 :经 870℃固溶、 40 %～ 5 0 %冷变形及 480℃× 1 5h时效处理后 ,合金可获得良好的综合性能。     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

Fast and effective color-based object tracking by boosted color distribution

In this paper, we propose a novel tracking algorithm, boosted color distribution (BCD), for tracking color objects. There exist three contributions in this paper. First, we propose a novel online gentle boost (OGB) algorithm for online learning. The essential idea of OGB is composed of two aspects: online updating candidate weak classifiers, and then choosing and combining them in a boosting way. Second, we design a novel weak classifier, log color feature distribution ratio, which focuses on the difference of color distributions rather than individual samples and provides a simple yet effective manner of mining color features for object tracking. Third, by combining our OGB algorithm and our log color features, we develop a fast yet effective color-based object tracking algorithm. Numerous experiments demonstrate that our tracking algorithm is better than or not worse than some state-of-the-art tracking algorithms on some public sequences.Overall, this paper presents a novel BCD algorithm for color object tracking that achieves good results at a fast speed.     

A Lyapunov functional approach to robust stability analysis of continuous-time uncertain linear systems in polytopic domains

In this paper, a sufficient linear matrix inequality (LMI) condition is presented for robust stability analysis of continuous-time linear time-invariant (LTI) systems in polytopic domains. The underlying idea behind the proposed approach is to introduce a family of complex functions which map the closed right-hand side of the complex plane into the inside of the closed unit circle centered at the origin. Then, the mapping properties are used to assure that all the eigenvalues of a system are located in the open left-hand side of the complex plane. Examples show the validity of the proposed condition.     

光学薄膜元器件外观特性机器视觉检测系统

本系统利用工业级摄像头及开发包的机器视觉功能与计算软件编程控制技术相结合,通过与输入控制系统中的标准膜片模板外观品质进行对比,实现高速高效、准确识别检测光学薄膜器件中滤光片的外观缺陷。可在生产线上根据外观品质标准模板中设定的类别进行自动分类装盒。     

基于混合式蜜罐系统的蠕虫病毒对抗模型的设计与实现

介绍了蠕虫病毒及蜜罐的相关知识,阐述了蜜罐的几种分类,并提出了一个基于混合式蜜罐系统蠕虫对抗模型,最后通过实验,证明此模型在与蠕虫病毒的对抗中具有非常高的效率。     

Caustic spot light for rendering caustics

It is difficult to render caustic patterns at interactive frame rates. This paper introduces new rendering techniques that relax current constraints, allowing scenes with moving, non-rigid scene objects, rigid caustic objects, and rotating directional light sources to be rendered in real-time with GPU hardware acceleration. Because our algorithm estimates the intensity and the direction of caustic light, rendering of non-Lambertian surfaces is supported. Previous caustics algorithms have separated the problem into pre-rendering and rendering phases, storing intermediate results in data structures such as photon maps or radiance transfer functions. Our central idea is to use specially parameterized spot lights, called caustic spot lights (CSLs), as the intermediate representation of a two-phase algorithm. CSLs are flexible enough that a small number can approximate the light leaving a caustic object, yet simple enough that they can be efficiently evaluated by a pixel shader program during accelerated rendering.We extend our approach to support changing lighting direction by further dividing the pre-rendering phase into per-scene and per-frame components: the per-frame phase computes frame-specific CSLs by interpolating between CSLs that were pre-computed with differing light directions.