基于ARM的指纹识别系统的设计

给出了基于ARM的指纹识别系统的设计实现方法,给出了由S3C2410、指纹传感器FPS110、存储器和通信接口等组成的硬件设计,同时也给出了系统初始化,指纹采集程序和通讯程序等软件设计。在指纹识别的可靠性及快速性上,充分展现了ARM的优势。     

GSM-R智能网基于位置的呼叫限制问题解决方案

介绍了GSM-R智能网和基于位置的呼叫限制的基本概念,在分析我国铁路实际情况及已有的解决方案基础上,提出了一种新的采用GSM-R智能网方式实现基于位置的呼叫限制的实现方案,并对该方案可能存在的问题进行研究,分析对比了几种方案的利弊。     

多源地理矢量数据要素解码方法研究

历史测绘地理信息数据格式繁杂,给数据共享与应用带来了困难,地理矢量数据要素解码过度依赖第三方平台,存在兼容性差、低可扩展性、特殊要素解码不完备等缺陷。为此,研究提出了基于Teigha及GDAL/OGR的多源地理矢量数据要素解码方法,实现了不依赖第三方平台的地理信息图件与数据解码,满足了多源矢量数据集成的数据访问、共享与格式转换需求。     

Injectable silk/hydroxyapatite nanocomposite hydrogels with vascularization capacity for bone regeneration

Localized and sustained osteogenic-angiogenic stimulation to bone defects is critical for effective bone repair.Here,desferrioxamine(DFO)was loaded on silk fibroin nanofibers and blended with hydroxyapatite nanorods(HA),forming injectable DFO-loaded silk fibroin-HA nanocomposite hydrogels.The composite hydrogels remained homogeneous distribution of HA with high ratio(60%)and also higher stiffness than that of pure silk fibroin nanofiber hydrogels,which provided stable osteogenic stimulation niches for tissue regeneration.Without the scarify of injectability,the hydrogels achieved slow delivery of DFO for above 60 days,resulting in suitable angiogenesis in vitro and in vivo and better osteogenesis than DFO-free systems.Compared to previous injectable silk fibroin-HA hydrogels,the introduction of vascularization capacity further stimulated the osteogenic differentiation of stem cells and accelerated new bone formation.Quicker and better bone healing were detected at defect sites after the injection of DFO-loaded nanocomposite hydrogels,indicating the effective synergistic effect of osteogenic and angiogenic cues.This work provides a simple and effective strategy of introducing angiogenic cues to bone matrices.We believe that the injectable nanocomposite hydrogels are suitable for the regeneration of bone tissues.     

多伺服电机智能化协调容错轨迹跟踪控制系统设计

针对一类具有执行器、传感器故障的多伺服电机控制系统,设计了相应的多伺服电机智能化协调容错轨迹跟踪控制系统.首先,提出了一种新结构的分布式中间估计器,修改了其设计结构,提高了估计方案的可行性.其次,通过在线强化学习估计策略,可以显著提高估计性能,其核心是自适应切换机制与源故障模式定位功能块的集成,并根据估计值设计了协调容...     

虚拟仪器技术在电子信息类实验教学中的应用

文章介绍了虚拟仪器的概念、特点及其构成,指出了电子信息实验室引入虚拟仪器的必要性,探讨了基于虚拟仪器技术的电子信息类实验室的建设方案和实验课程的实施方法.     

An application of network modeling method to scientific research and demonstration platform-Connector load analysis

A new approach referred as“the network modeling method”was developed by the authors to analyze the behaviors of marine structures.In this paper the method is briefly described and applied to predict the loads acting on the connectors between the two modules of the Scientific Research and Demonstration Platform(SRDP),which was deployed in a complicated wave environment near islands and reefs in South China Sea.Based on this method,the response amplitude operators(RAOs)of the connector loads of the SRDP in regular waves,and the time variations of the connector loads of the SRDP in an on-site measured random sea state are predicted and presented.The significant stresses at 20 spots of the local connection structure induced by the connector loads in the sea state are further calculated.The comparisons between the predicted and the on-site measured stresses confirm that the network modeling method is feasible to some extent and especially useful for design of the connectors’arrangement,estimation of the connector loads and the related structural safety of a multi-module floating structure in early design stage.     

基于MATLAB GUI 的钻井工具姿态采集处理系统

本文主要涉及MATLAB在钻井工具空间姿态测量方面的应用,采用MATLAB环境下的GUI图形用户界面编程方法编制了上位机软件.该上位机软件通过对串口的操作和对Activex控件的调用,在室内模拟钻井实验中,实现了PC与片上系统C8051F060在115 200波特率下的串行通信、多路数据采集的控制及数据传输、处理,最终实现了对钻井工具空间姿态的测量.     

The characteristics of waves around an entrance of a lagoon in South China Sea

The characteristics of the waves around a lagoon entrance in South China Sea were observed during the past one and half years based on the wave measurements.The...     

基于陀螺仪/BDS的多飞行器编队相对定姿方法

多飞行器编队的多重作业能力强、可靠性高、工作效率高,是未来航空领域发展的重要趋势。连续高精度的相对姿态信息对编队队形的保持或重构必不可少,这对相对定姿的精度和连续性提出更高要求。为了提高相对定姿精度和连续性,设计了一种基于陀螺仪/BDS的相对定姿方案。采用BDS差分技术消除了载波相位中的公共误差,利用高精度双差载波相位进行量测更新,提高了相对定姿的精度。同时,基于飞行器之间的相对姿态模型,利用陀螺仪测得的角速度进行一步预测,解决BDS不可用时无法得到相对定姿结果的问题,提高了相对定姿的连续性。仿真验证表明,所设计方案不仅可以实现高精度相对定姿,并且在可用星少于四颗时仍具备较高精度的相对定姿能力,能够满足多飞行器编队对相对定姿精度和连续性的要求。