Ring‐opening polymerization of lactones initiated by diphenylzinc–coinitiator systems

Diphenylzinc, alone or in combination with water and butanone as coinitiators, was used as a polymerization initiator system for a variety of lactones at varying temperatures. The resulting data indicate that the course of the polymerization is greatly influenced by the lactone structure, as well as by the molar ratio of coinitiator to diphenylzinc. When used alone, diphenylzinc exhibited high activity as an initiator in δ‐valerolactone polymerizations, although it was less efficient when used in the β‐butyrolactone and the β‐propiolactone polymerizations. Activity in the polymerization of β‐lactones was increased by adding small amounts of butanone or water. It was also observed that the diphenylzinc–butanone combination was more effective than the diphenylzinc–water mixture in the polymerizations of β‐butyrolactone and β‐propiolactone. Copyright © 2003 Society of Chemical Industry     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Comparison between the binding of chlorpheniramine maleate to poly(sodium 4-styrenesulfonate) and the binding to other polyelectrolytes

The interactions of the antihistaminic drug chlorpheniramine maleate (CPM) with the negatively charged polyelectrolytes poly(sodium 4-styrenesulfonate) (PSS) and poly(acrylic acid) (PAA) are studied by the washing method of the diafiltration technique at conditions simulating those of the small intestine such as pH 7.5 and 0.13 M NaCl. The results are compared with those already reported involving other pharmacologically important polyelectrolytes such as alginic acid (ALG), carboxymethylcellulose (CMC), and κ- and ι-carrageenan (κ- and ι-CAR). As in the case of ALG, CMC, and CAR, interactions of CPM with PAA appear to be electrostatic and are cleaved in the presence of 0.13 M NaCl. On the contrary, apart from electrostatic interactions, additional interactions are found with PSS and residual interactions are kept in the presence of 0.13 M NaCl, a fact that may be attributed to π-π interactions and hydrophobic forces. The effect of the addition of 4 M urea, branched poly(ethyleneimine) (BPEI), and poly(vinylpyrrolidone) (PVP) is also studied. The addition of urea 4 M or 0.001 M BPEI produces a decrease on the amounts of counterions bound to PSS at infinite elution, while the addition of PVP does not produce any change on the diafiltration profiles.     

Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

Contribution of the ozonation pre-treatment to the biodegradation of aqueous solutions of 2,4-dichlorophenol

The effect of ozonation on the biodegradability of 100-ppm aqueous solutions of 2,4-dichlorophenol has been investigated. BOD at 5, 10 and 21 days, BOD/COD and BOD/TOC ratios and the average oxidation state are presented. Biodegradability measured as BOD5/COD ratio was increased from 0 of the original solution to 0.25 at the moment of removing all the initial compound (corresponding to an ozone dose of 0.12 g L-1, 0.48 for BOD21/COD ratio). To test the effect of this pre-treatment, the biological oxidation of these pre-ozonated solutions was performed in two semi-continuous stirred tank reactors, one with non-acclimated sludge and one with acclimated-to-phenol sludge. The study showed that the TOC content of the pre-treated solution could be removed up to 68% by an aerobic biological treatment as well as co-digested with municipal wastewater (TOC removal up to 82%), with similar operating retention times to a municipal wastewater plant (12-24 h). Kinetic studies based on Monod model have also been carried out. Pseudo-first-order kinetic constants were found to be in the range of 0.5-0.8 L g TVSS-1 h-1.     

Utility of Albicans ID plate for rapid identification of Candida albicans in clinical samples. Rapid identification of Candida albicans

A clinical study was carried out in an attempt to assess the efficacy of a newly designed electric toothbrush compared to a conventional manual toothbrush using the American Dental Association's protocol for evaluating toothbrushes. An Oral-B 35 manual toothbrush, which served as the control, was compared to the Plaq & White125 electric toothbrush. Examinations were performed by two calibrated examiners at baseline, day 15 and day 30. Examinations included the gingival index, plaque index and bleeding index. Mean indices were calculated and compared between the two brushes using the repeated measures multiple analysis of variance. No statistically significant differences between the mean indices on the three examination days were observed following the use of the manual or the electric toothbrushes. The results of this study demonstrate that the electric toothbrush was numerically more effective than the manual toothbrush in reducing supragingival plaque levels, either before or after brushing, at each examination date compared to baseline plaque values. However, this difference was not statistically significant. This and other findings concluded that the Plaq & White toothbrush is comparable to the control ADA-accepted toothbrush.     

Patients with rheumatoid arthritis: study of the correlation between density of glucocorticoid receptors in synovial cells and clinical response to steroidal treatment

BACKGROUND: The target cellular response to glucocorticoids is proportional to the concentrations or affinity of specific receptors to these substances. AIM: To look for a correlation between glucocorticoid receptor concentrations in synovial wall cells and the clinical response to steroidal treatment in patients with rheumatoid arthritis. PATIENTS AND METHODS: Twenty eight patients with rheumatoid arthritis were studied. Each subject was subjected to a synovial biopsy, in which a dry radioautographic technique for diffusible compounds was used. Patients were treated afterwards with three 500 mg intravenous pulses of methilprednisolone. RESULTS: A mean of 44.8% of synovial cells (range 30.1-62.8%) had binding sites for 3H dexamethasone. All patients had a significant clinical improvement after methylprednisolone. Multiple regression analysis did not show a correlation between clinical response and glucocorticoid receptor concentration. CONCLUSIONS: The lack of association between glucocorticoid receptor concentrations and clinical response could be due to the large steroid dose used, that saturated all available receptors.     

Constructive model-based analysis for safety assessment

The aerospace industry still uses fault trees to perform reliability analysis. This is because fault-tree modeling and analysis (FTA) seems easier to practical engineers when compared with Markov models, even though FTA provides a weaker form of analysis. In this paper, we propose an automatic strategy for generating Markov-based models and corresponding analysis formulations, according to ARP 4761, directly from Simulink diagrams annotated with failure information. The generated Markov-based models are expressed in the formal language PRISM, and the analysis is carried out by the PRISM model checker. The strategy is compositional and based on a comprehensive set of translation rules from Simulink to PRISM. We briefly address soundness and completeness of the rules and, to illustrate the application of the strategy, we apply it to a classical avionics case study: an actuator control system.     

The Trend Toward Latin American Economic Integration

Revolutionary developments in the patterns of world trade have taken place during the past five years, and Latin America is no exception. This article discusses the effects of the Latin American Free Trade Association, the Central American Common Market, and the Inter-American Development Bank on the economic integration of Latin America.