高能超声处理对锡锑包晶合金凝固组织的影响

在锡锑包晶合金的凝固过程中导入高能超声，不仅显著细化α相和β相晶粒组织，同时使具有立方晶体特征的β相组织有明显的球化趋势，消除了密度偏析，分析了高能超声细化凝固组织的机理。     

稀土Pr对Al2O3-SiO2(Sf)/ZL109复合材料组织及性能的影响

本文采用挤压浸渗法 ,制得不同稀土含量的硅酸铝短纤维增强铝基复合材料。用光学显微镜观察了复合材料的铸造显微组织 ,分析了稀土含量对共晶硅组织形态的影响 ;用扫描电镜对复合材料基体中的稀土相进行了观察 ,探索了稀土相的分布位置及其形态 ;并对不同稀土含量的复合材料进行了摩擦磨损实验 ,结果表明稀土能增强复合材料的耐磨性     

调频步进信号处理方法探讨

调频步进信号是一种新的高距离分辨率信号。文章首先简要阐述了线性调频信号的处理过程；其次对比步进频率、线性调频步进信号的处理过程，得到一种新的处理方法-合成处理法，最后通过仿真论证其正确性。     

Quality-of-Service Based Protection in MPLS Control WDM Mesh Networks

Intelligent methods for automatic protection and restoration are critical in optical transport mesh networks. This paper discusses the problem of quality-of-service (QoS)-based protection in terms of the protection-switching time and availability for end-to-end lightpaths in a WDM mesh network. We analyze the backup lightpath-sharing problem in such networks and study the correlation of the working lightpaths and the impact of the correlation on the sharing of the backup lightpaths. We present a multi-protocol-label-switching (MPLS) control-based fully distributed algorithm to solve the protection problem. The proposed algorithm includes intelligent and automatic procedures to set up, take down, activate, restore, and manage backup lightpaths. It greatly reduces the required resources for protection by allowing the sharing of network resources by multiple backup lightpaths. At the same time, it guarantees, if possible, to satisfy the availability requirement even with resource sharing by taking the correlation of working lightpaths into consideration. A simple analysis of the proposed algorithm in terms of computation time and message complexity indicates that the implementation of the algorithm is practical. The illustrative studies that compare the performance of 1:1, unlimited sharing, and QoS-based backup sharing algorithms indicate that QoS-based sharing achieves comparable performance as unlimited sharing, which is much better than the 1:1 backup scheme in terms of connection blocking probability, average number of connections in the network for a given offered load, and network resource utilization.     

长庆油田气井固井技术

长庆油田陕北安塞地区气井埋深一般为3500～4000m，底部气层活跃，上部地层撑压能力差，钻井和固井易发生满失。针对该地区的地质情况、钻井情况、固井情况，制定出了一整套气井固井工艺方案，并根据工艺要求，经过室内大量的模拟试验，研究出了6组水泥浆体系。在固井过程中采用分级注水泥工艺和3种密度、3种稠化时间的防窜、防满水泥浆体系。3口井的固井实践证明，该套固井工艺切实可行，固井水泥浆体系有利于气井固井施工，保证了固井质量．气层井段固井质量优质。     

关于Ada95变体部分等语法的修正意见

本文指出了Ａｄａ９５ 参考手册中记录变体部分、记录聚集、分情形语句与异常处理段等语法描述中存在的问题，并分别给出了它们的修正方案。     

弹药内弹道性能检验新方法数学模型的建立

本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。并对数学模型的精度进行了分析、检验和验证。     

钨在铂电极上成核动力学研究

采用循环伏安法和计时电流法研究了钨在ＫＦ－Ｂ２Ｏ３－Ｋ２ＷＯ４（６２－３７－１ｍ／ｏ）熔体中（Ｔ＝７９５℃）铂电极上成核动力学过程。实验结果表明：该过程符合扩散步骤控制的半球形三维晶核连续成核长大的动力学规律。     

一种多输入队ATM交换结构

本文提出一种多输入排队ＡＴＭ交换结构和相应的输出冲突解决方法，它可以使交换网络避免输入队固有的排头阻塞，从而使网络在不增加运行速率的情况下，可达到输出排队的性能。文中介绍了冲突解决办法及其实现技术，说明它可方便地在高速网中实现。     

A weight function technique in three-dimensional fracture mechanics: static and dynamic

The weight function technique is used to analyse both static and dynamic three-dimensional fracture mechanics problems. The weight functions are first determined, in terms of Laplace transforms, by an indirect boundary element method. The stress intensity factor in the time domain is then obtained by Durbin's inversion method. The dynamic stress intensity factors are calculated for a central square crack in a square bar and a circular or elliptical crack in a cylinder under different types of loads. An extension of the method for arbitrary dynamic loads is developed via a dynamic Green's function approach.