Ultrastructural investigation of intact orbital implant surfaces using atomic force microscopy

This study examined the surface nanostructures of three orbital implants: nonporous poly(methyl methacrylate) (PMMA), porous aluminum oxide and porous polyethylene. The morphological characteristics of the orbital implants surfaces were observed by atomic force microscopy (AFM). The AFM topography, phase shift and deflection images of the intact implant samples were obtained. The surface of the nonporous PMMA implant showed severe scratches and debris. The surface of the aluminum oxide implant showed a porous structure with varying densities and sizes. The PMMA implant showed nodule nanostructures, 215.56 ± 52.34 nm in size, and the aluminum oxide implant showed crystal structures, 730.22 ± 341.02 nm in size. The nonporous PMMA implant showed the lowest roughness compared with other implant biomaterials, followed by the porous aluminum oxide implant. The porous polyethylene implant showed the highest roughness and severe surface irregularities. Overall, the surface roughness of orbital implants might be associated with the rate of complications and cell adhesion. SCANNING 33: 211–221, 2011. © 2011 Wiley Periodicals, Inc.     

Absolute interferometric distance measurement using a FM-demodulation technique

We propose an interferometric method for measuring absolute distances larger than the wavelength. A laser diode is used as a light source. The principle of operation is based on multiple-wavelength interferometry that uses a modulated light source. This method uses the fact that the wavelength of light emitted by the laser diode can be varied by means of the injection current. The modulation of the injection current in combination with the optical heterodyne technique causes a high-frequency phase-modulated detector signal. The phase deviation of the signal is a measure of the optical path difference in the interferometer. By FM demodulation of the detector output with a phase-locked loop demodulator, the optical path difference can be determined directly without the classical ambiguity problem of interferometry. The measuring range in the experiments was limited to 50 mm by the maximum travel range of the used specimen translation stage. Because of the inherent light sensitivity of the method described, the rangefinder can be used for three-dimensional profile measurements on a wide variety of objects, even on diffuse scattering surfaces.     

Resolution and intensity distribution of output images reconstructed by sampled computer-generated holograms

We address reconstruction abilities of computer-generated holograms that are fabricated in a sampled form and designed for spherical-wave illumination. Our approach enables one to define the limit of resolution of the object reconstruction and the light-intensity distribution in an output plane. The analysis takes into account a hologram aperture, a sampling aperture, and a curvature radius of spherical illumination. Theoretical results are confirmed by experimental verification.     

Fluid jet polishing of optical surfaces

We present a new finishing process that is capable of locally shaping and polishing optical surfaces of complex shapes. A fluid jet system is used to guide a premixed slurry at pressures less than 6 bars to the optical surface. We used a slurry comprising water and 10% #800 SiC abrasives (21.8 mum) to reduce the surface roughness of a BK7 sample from 350 to 25 nm rms and to vary the shape of a polished sample BK7, maintaining its surface roughness of 1.6 nm rms, thereby proving both the shaping and polishing possibilities of the presented method.     

Rectangular surface-relief transmission gratings with a very large first-order diffraction efficiency (~95%) for unpolarized light

Computer optimization shows that the first-order diffraction efficiency of a lossless-transmission surface-relief grating with a rectangular surface profile can be made very large (~95%) simultaneously for light of TE and TM polarizations incident near the Bragg angle by the proper choice of the fill factor. The case for visible light incident close to the Bragg angle on unslanted gratings with periodicities corresponding to Bragg angles of 30 degrees , 37.5 degrees , and 45 degrees is presented. The refractive index of the grating material was chosen in the range between 1.2 and 2.     

Beam propagation constants for a radial laser array

The beam quality of a radial laser array, quantified in terms of the M(2) propagation constant, is determined as a function of array element configuration. A lower bound on array M(2) is estimated for both phase-locked and nonphase-locked conditions. It is shown that, to achieve near-unity M(2) array, either aperture filling or spatial filtering is required in addition to phase locking. An aperture-filling method suitable for radial arrays of CO(2) slab lasers is presented.     

Combination of fiber-guided pulsed erbium and holmium laser radiation for tissue ablation under water

Because of the high absorption of near-infrared laser radiation in biological tissue, erbium lasers and holmium lasers emitting at 3 and 2 μm, respectively, have been proven to have optimal qualities for cutting or welding and coagulating tissue. To combine the advantages of both wavelengths, we realized a multiwavelength laser system by simultaneously guiding erbium and holmium laser radiation by means of a single zirconium fluoride (ZrF(4)) fiber. Laser-induced channel formation in water and poly(acrylamide) gel was investigated by the use of a time-resolved flash-photography setup, while pressure transients were recorded simultaneously with a needle hydrophone. The shapes and depths of vapor channels produced in water and in a submerged gel after single erbium and after combination erbium-holmium radiation delivered by means of a 400-μm ZrF(4) fiber were measured. Transmission measurements were performed to determine the amount of pulse energy available for tissue ablation. The effects of laser wavelength and the delay time between pulses of different wavelengths on the photomechanical and photothermal responses of meniscal tissue were evaluated in vitro by the use of histology. It was observed that the use of a short (200-μs, 100-mJ) holmium laser pulse as a prepulse to generate a vapor bubble through which the ablating erbium laser pulse can be transmitted (delay time, 100 μs) increases the cutting depth in meniscus from 450 to 1120 μm as compared with the depth following a single erbium pulse. The results indicate that a combination of erbium and holmium laser radiation precisely and efficiently cuts tissue under water with 20-50-μm collateral tissue damage.     

Optical inhomogeneity and microstructure of ZrO(2) thin films prepared by ion-assisted deposition

The index inhomogeneity and the microstructure of ZrO(2) films prepared by Ar-ion-assisted deposition are investigated. The results show that as the Ar-ion momentum transferred to the growing film increases, the average refractive index increases, the vacuum-to-air spectral shift becomes almost zero, the sign of relative inhomogeneity transits from negative to positive, and the void fraction of the top layer next to air becomes smaller than that of the bottom one. These optical properties result from the improved packing density and denser outer region next to air. The Ar-ion bombardment also induces the changes in microstructure of ZrO(2) films, such as the preferential (111) orientation of cubic phase, increase in compressive stress, and reduction of surface roughness.