行波热声驱动器的性能分析

在简单介绍行波热声驱动器的研究历史、工作机理及其与驻波型热声驱动器的区别之后，着重对环路部分的性能进行了预测分析，并给出一些有益的结论。     

合成吡啶类化合物用催化剂的再生行为研究

对合成吡啶类化合物用的失活催化剂上的结焦物进行了元素分析 ,并着重对失活催化剂的再生行为进行了研究。得到了不同失活程度催化剂的再生曲线及相同失活程度、不同再生条件下的再生曲线。经回归求得了一简单的再生反应动力学经验方程式 ,其中反应级数为碳含量的 1.16 5级 ,活化能为 4 2 .5 72kJ/mol,计算值与实验值的平均相对误差为 6 .5 %。     

常减压减一线生产柴油组分的探讨

从理论上分析了降低减一线馏程干点的可能性 ,并通过操作调整 ,降低了减一线馏程干点 ,使之符合作柴油调合组分。不仅对原直馏柴油的质量不产生影响 ,且经济效益可观。     

三维施工中SN388炮点表的设置

本文提供了SN388在三维施工中炮点表的几种设置方法，并进行了相应的对比说明，最后给出了改进炮点表设置的有关设想。     

On the interaction impedance of the coupled cavity structure

The formula and program for calculating the total and negative first harmonic interaction impedance from the data of “large perturbation measurement” are given. This program is a part of the programs for CCTWT design.     

The Athy—Heckel equation applied to granular agglomerates of basic tricalcium phosphate [3Ca3PO4)2·Ca(OH)2]

It is shown that direct compression grade tricalcium phosphate yields linear Heckel plots only if the particle density used is that obtained by liquid pycnometry or mercury porosimetry. If the true density is used (i.e. that obtained by gas displacement), then linearization is not obtained in a pressure range where bonding evidently occurs. It is shown that the pore volume in the range of diameters from 0.5 to 2 μm decreases as tableting pressure increases, and that bonding is associated with the loss of pores of this size.     

砂砾岩储集层含油性解释方法

LJ地区砂砾岩地层具有岩石结构复杂，储集层非均质性强，稠油和稀油并存的特点，利用测井资料解释含油性难度很大，以地层测试资料为依据，综合利用多种测井信息，提取反映含油性变化的测井特征参数；应用测井参数交会法和测井相分析法建立有效，快速识别稠油，油层和水层的标准，测井相分析法消除了用测井单参数和两参数交会解释含油性存在的多解性，提高子解释结果的成功率，用编制的解释软件处理了LJ地区58口井的资料，解释结果与试油资料对比吻合程度较高，为砂岩储层含油性解释提供了一种有效，快速的方法，为该区先导性试验提供了可靠的依据。     

双时基频率校准电路

提供精确的时间基准是精密仪器和高精度设备计时和工作的关键技术之一。文中采用两套晶振电路，通过分频产生高频和低频两个频率信号，采用编码的方法对两个频率信号在每一个时钟周期内进行动态校核，只有两个晶振的频率在允许的精度范围内，或同时增大（缩小）相同的倍数，校核后频率信号才是正确的，且能给系统提供精确的时间基准。该方法能有效防止系统的时钟周期因意外的原因伸长或缩短。整个电路可以作为精密仪器或高精度设备的一个模块电路。     

Using motion from orthographic views to verify 3-D point matches

The specific problem addressed by the authors is how to detect the true match of a fourth point from among candidate matches in a situation in which three points have already been matched. The two sets of points to be matched are both subject to measurement errors. The depth error is more dominant than errors in the other two coordinates; however, the exact statistical distribution of the measurement errors is not known. The authors present a new method for solving the problem. The method is based on the technique of motion analysis using orthographic views. It discards the noisy z (depth) coordinates and uses only the x and y coordinates of the points to verify the match. The effect of depth errors on the motion estimate is completely prevented. Results show that this method is substantially more effective than previous methods that use all three coordinates