The heater test at the Grimsel Rock Laboratory: The thermo-mechanical response of the rock mass to a heat flux

The Grimsel Test Site (Felslabor Grimsel — FLG) is situated at a depth of 450 m in the Juchlistock massif of the Bernese Oberland. It is managed by the National Cooperative for the Storage of Radioactive Waste (NAGRA-Switzerland).By means of a heater test, the power output of canisters filled with high-level waste is simulated. This heater test is performed by the German Gesellschaft für Strahlen- und Umweltforschung — GSF. Two electrical heaters, with a heatable length of 6 m, a diameter of 0.3 m and an available power of 4 kW/m, are installed in two vertical boreholes. One of them is located in the granite adjacent to a strongly fractured lamprophyre vein, the other one directly within this disturbed zone. They are operating since August 1986.The thermo-mechanical reaction of the rock mass is registered by a large number of measurement devices which are installed in an array of instrument boreholes around the heaters. They record the deformation and the alteration of rock stresses, the pore water pressure and the water conductivity caused by heating.     

ALUM SHALE BITUMEN MATURATION AND MIGRATION: IMPLICATIONS FOR GOTLAND'S OIL

Thermal maturation of Swedish Alum Shale kerogen and bitumen has been determined from core samples from Eastern and Central Sweden. In samples from Eastern Sweden (Öland and Gotland), the kerogen and bitumen are thermally immature with respect to petroleum generation. In some areas of Central Sweden (Närke, ÖstergÖtland, and Kinnekulle in VästergÖtland), the kerogen is immature, whereas the bitumen is marginally mature to mature. In other areas of Central Sweden (Halleberg-Hunneberg in VästergÖtland), the kerogen is supermature and the bitumen mature. This suggests that bitumen from a mature source-rock has migrated into the Alum Shales of Central Sweden. Migration in Central Sweden is further evidenced by the occurrence of obviously-migrated bituments in vugs and voids in the organicpoor Ordovician limestone overlying the Alum Shale in Central Sweden, and in concretions within the Alum Shale itself. Based on biomarker distributions of extracted bitumen, Alum Shale kerogen pyrolysate and obviously-migrated oils, and the fact that the Alum Shale in most of the areas studied is the only petroleum source-rock extant, it is suggested that the migrated bitumen in Central Sweden is from the Alum Shale itself. Bitumen has migrated from areas where the Alum Shale is in close proxmity to Permo-Carboniferous intrusions, such as Halleberg-Hunneberg, into nearby areas such as Närke and ÖstergÖtland, where there is no evidence of intrusion and the indigenous organic matter is thermally immature. Other areas, where Alum Shales were associated with intrusions and consequently sourced oil, may have been eroded away. There are producing wells on the island of Gotland, where the Alum Shale is also thermally immature. It is therefore assumed that heating which was responsible for generating Gotland's oil was very localized (such as by an intrusion) or that the oil has migrated from a thermally moremature, distant area. On the basis of reservoir rock porosity, and the fact that the Alum Shale of Gotland contains no migrated component, localized heating is favored.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

On the colour reactions of potato glycoalkaloids in strong acids in the presence of paraformaldehyde

The colour reaction of potato glycoalkaloids, containing solanidine as steroid, with strong acids and paraformaldehyde was examined to elucidate the kinetics and mutual relationship of the ‘Clarke’ and ‘Marquis’ reactions. It was found that the influence of time of addition of paraformaldehyde was the major factor in deciding the type of colour changes encountered. This factor and the specific absorption kinetics have important consequences for the use of these types of colour reactions as a quantitative assay. According to the structural similarity of the steroidal part of potato glycoalkaloids and cholesterol, colour reactions of both have been compared, indicating that both steroids react in strong acids in the presence of an oxidator, provided that the more lipophilic character of cholesterol is taken into account. Therefore a similar mechanism of a serial oxidation of carbonium ions as in the case of cholesterol, is suggested as the basis for these specific colour reactions of potato glycoalkaloids.     

Epoxidation of natural rubber studied by nmr spectroscopy

Epoxidation of natural rubber with peroxyacids in homogeneous solution (CHCl₃, benzene) and in latex occurs without main chain fission or isomerization of the cis configuration. There are two possible modes of addition of oxygen to the double bond, which gives rise to diastereoisomers in dyad structures, as shown by the occurrence of splitting of ¹³C NMR resonances in 100% epoxidized rubber. In partially epoxidized rubber the ¹³C NMR resonances of the methylene carbon atoms have been fully assigned using pulse sequences and lanthanide shift reagents, in terms of triad sequences. Resonances in the olefinic region of the spectrum require assignment in terms of pentad sequences whereas those from the oxirane region are much more closely spaced and are assigned using triads. Intensity measurements on the methylene carbon NMR resonances show that the epoxidation reaction is a random process in both homogeneous solution and in latex particles.     

Solution of process flowsheets by formal gauss elimination

The paper describes the principles involved in two computer programs which calculate mass and heat balances for ammonia and methanol loops. Non-linear conditions are solved in an outer loop whereas the inner loop solves a set of linear equations by a formal Gauss triangulation and numerical back substitution.     

A note concerning analytical expressions for Rice's upper-bound solution for fully plastic edge notched strips

A brief review of plasticity solutions for the edge-notched strips under combined axial force and bending moment is performed, and the lack of a suitable analytical model for certain regimes is identified. A formal derivation of Rice's upper bound model, which was evaluated by the original proposer via a semi-graphical procedure, is given, leading to exact analytical expressions for this model. Results are given in the form of a non-dimensional interaction (‘constraint’) diagram. The model has a number of applications, including studies on fracture mechanics testpieces.     

Lateral space-charge effects on ballistic electron transport across graded heterojunctions

Hot electron transport across graded compound semiconductor heterojunctions has been explored using a two-dimensional formulation of the self-consistent ensemble Monte Carlo method. The Al_xGa_1-xAs/GaAs heterojunction imbedded into a vertical field effect transistor with two ohmic contacts (source, drain) and two lateral Schottky gates has been used as an example. Lateral space charges modulated by the gates are shown to control ballistic injection of electrons over the heterojunction under steady state conditions. The transient response to a gate pulse is found to be determined by carrier transit from the heavily doped source contact region into the channel. A conceptual one-dimensional section model is used to explain the Monte Carlo results.     

Computers for symbolic processing

A detailed survey on the motivations, design, applications, current status, and limitations of computers designed for symbolic processing is provided. Symbolic processing computations are performed at the word, relation, or meaning levels, and the knowledge used in symbolic applications may be fuzzy, uncertain, indeterminate, and ill represented. Various techniques for knowledge representation and processing are discussed from both the designers' and users' points of view. The design and choice of a suitable language for symbolic processing and the mapping of applications into a software architecture are then considered. The process of refining the application requirements into hardware and software architectures is treated, and state-of-art sequential and parallel computers designed for symbolic processing are discussed