Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Spatiotemporal aspects of real-time PM(2.5): low- and middle-income neighborhoods in Bangalore, India

We measured outdoor fine particulate matter (PM(2.5)) concentrations in a low- and a nearby middle-income neighborhood in Bangalore, India. Each neighborhood included sampling locations near and not near a major road. One-minute average concentrations were recorded for 168 days during September 2008 to May 2009 using a gravimetric-corrected nephelometer. We also measured wind speed and direction, and PM(2.5) concentration as a function of distance from road. Average concentrations are 21-46% higher in the low- than in the middle-income neighborhood, and exhibit differing spatiotemporal patterns. For example, in the middle-income neighborhood, median concentrations are higher near-road than not near-road (56 versus 50 μg m(-3)); in the low-income neighborhood, the reverse holds (68 μg m(-3) near-road, 74 μg m(-3) not near-road), likely because of within-neighborhood residential emissions (e.g., cooking; trash combustion). A moving-average subtraction method used to infer local- versus urban-scale emissions confirms that local emissions are greater in the low-income neighborhood than in the middle-income neighborhood; however, relative contributions from local sources vary by time-of-day. Real-time relative humidity correction factors are important for accurately interpreting real-time nephelometer data.     

Field screening of waterborne petroleum hydrocarbons by thickness shear-mode resonator measurements

An inexpensive, field-portable sensor for direct, aggregate determination of aqueous petroleum hydrocarbons (PH) down to sub-ppm levels was developed. The basis of this sensor was an unusual, highly nongravimetric frequency response of 10 MHz (series fundamental) AT-cut quartz crystals when coated with rubbery silicone films. The response depended linearly and reliably on the total concentration of dissolved hydrocarbons over a range of 0.01-100 mg x L(-1) or up to aqueous solubility limits. Calibration sensitivities were measured individually for laboratory-prepared solutions of BTEX (benzene, toluene, ethylbenzene, and xylene isomers) and C6-C8 aliphatic components. Each component demonstrated a method detection limit (MDL) in the low-to sub-ppm range (benzene 10 mg x L(-1), n-hexane 0.54 mg x L(-1)) for light coatings of a commercially available poly-(dimethylsiloxane) gum (OV-1, > 10(6) g x mol(-1)) and lower MDLs for heavier coatings. Pairwise responses for the aliphatic and benzenoid standards were additive, indicating that aggregate determinations of mixtures (especially light fuels) were possible. Natural matrix interferences caused by sample turbidity and ionic strength were overcome by simple preparative methods. Fuel-spiked natural waters were determined with respect to standards and verified by gas chromatography. A 0.19 mg x L(-1) MDL for gasoline was obtained for heavy OV-1 films. Field determinations of groundwater surrounding a leaking underground fuel tank demonstrated that the sensor and method were useful for on-site PH screening. Large differences between the equilibration times of aliphatic and benzenoid components also indicated one avenue for BTEX speciation with the device.     

Transport of chemical and microbial compounds from known wastewater discharges: potential for use as indicators of human fecal contamination

The quality of drinking and recreational water is currently (2005) determined using indicator bacteria. However, the culture tests used to analyze forthese bacteria require a long time to complete and do not discriminate between human and animal fecal material sources. One complementary approach is to use chemicals found in human wastewater, which would have the advantages of (1) potentially shorter analysis times than the bacterial culture tests and (2) being selected for human-source specificity. At 10 locations, water samples were collected upstream and at two successive points downstream from a wastewaster treatment plant (WWTP); a treated effluent sample was also collected at each WWTP. This sampling plan was used to determine the persistence of a chemically diverse suite of emerging contaminants in streams. Samples were also collected at two reference locations assumed to have minimal human impacts. Of the 110 chemical analytes investigated in this project, 78 were detected at least once. The number of compounds in a given sample ranged from 3 at a reference location to 50 in a WWTP effluent sample. The total analyte load at each location varied from 0.018 microg/L at the reference location to 97.7 microg/L in a separate WWTP effluent sample. Although most of the compound concentrations were in the range of 0.01-1.0 microg/L, in some samples, individual concentrations were in the range of 5-38 microg/L. The concentrations of the majority of the chemicals present in the samples generally followed the expected trend: they were either nonexistent or at trace levels in the upstream samples, had their maximum concentrations in the WWTP effluent samples, and then declined in the two downstream samples. This research suggests that selected chemicals are useful as tracers of human wastewater discharge.     

Evaluation of two commercial lateral-flow test kits for detection of animal proteins in animal feed

Performance characteristics were evaluated for two lateral-flow test kits, Reveal for Ruminant in Feed (Neogen Corporation) and FeedChek (Strategic Diagnostics Inc.), designed to detect ruminant or terrestrial animal proteins in feeds. The stringent acceptance criteria used were developed by the Center for Veterinary Medicine Office of Research to identify test kits with comparable selectivity and sensitivity to microscopy and PCR assay, the analytical methods used by the U.S. Food and Drug Administration (FDA). Guidelines were developed for evaluating the selectivity, sensitivity, ruggedness, and specificity of these kits. These guidelines further stated that ruggedness and specificity testing would be performed only after a test passed both the selectivity and sensitivity assessments. Acceptance criteria for determining success were developed using a statistical approach requiring 90% probability of achieving the correct response, within a 95% confidence interval. A minimum detection level of 0.1% bovine meat and bone meal, consistent with the sensitivity of the methods used by the FDA, was required. Selectivity was assessed by testing 60 dairy feed samples that contained no added animal proteins; sensitivity was determined by evaluating 60 samples (per level of fortification) of the same feed that contained 0.025, 0.05, 0.1, 0.25, 0.5, 1, or 2% bovine meat and bone meal. The Reveal test passed the selectivity assessment but failed the sensitivity assessment, detecting only samples fortified at the 2% level and then only 17 to 33% of those samples, when read according to the label directions. The FeedChek test passed the sensitivity assessment but failed the selectivity assessment, with rates for false-positive results ranging from 34 to 38%, depending on the user. The sensitivity of the Reveal test was affected by the concentration of trace minerals present in the feed; concentrations toward the high end of the normal range prevented the detection of true positive feed samples containing bovine meat and bone meal. Better sensitivity assessments were obtained when lamb meal was used either alone or in combination with bovine meat and bone meal. The FeedChek test was not affected by the concentration of trace minerals or by the type of animal meal used. These results indicate that neither of the two tests is adequate for routine regulatory use.     

Sire variation in fatty acid composition of crossbred Wagyu steers and heifers

Effects of sires on lipid composition of subcutaneous adipose tissue and longissimus dorsi muscle were studied using 113 F(1) heifer and steer calves sired by eight Wagyu bulls out of three different cow herds. Wagyu sires were used and grouped as Old (n=6) and New (n =2) sires, respectively, based on the chronological order in which they were imported into the US. Animals were fed a backgrounding diet for 112 days consisting of an 80:20 ratio of roughage:concentrate, then grazed on orchard grass and bluegrass for 84 days, and finished on a 10:90 ratio of roughage:concentrate diet for 231 days in a feedlot. For longissimus dorsi muscle, progeny from Old sires had higher (P<0.05) monounsaturated to saturated fatty acid ratios (MUFA:SFA) than progeny of New sires. There were also differences (P<0.05) among individual sires for polyunsaturated to saturated fatty acid ratio (PUFA:SFA) (0.05-0.08) and MUFA:SFA (1.03-1.21). Progeny of Angus cows at Washington State University (WSU) had lower (P<0.05) MUFA:SFA and lower SFA than progeny of WSU crossbred and commercial cows. Steers had lower (P<0.05) MUFA:SFA and higher (P<0.05) SFA than heifers. For subcutaneous fat, heifers had higher levels (P<0.05) of linoleic acid (C18:2) and PUFA:SFA than the steers. Means for ether extractable fat in longissimus dorsi muscle differed among sires (P<0.05) and ranged from 7.58 to 13.13%. Progeny from WSU Angus cows had higher (P<0.05) ether extractable fat than WSU crossbred and commercial cows. Cholesterol content of longissimus dorsi muscle was not influenced by sire, cow herd or sex (P>0.05).     

Molecular aspects of the transport and toxicity of ochratoxin a

Ochratoxins are a class of naturally occurring compounds produced by several fungi. The most toxic is ochratoxin A (OTA), and occurrence of some human nephropathies and tumors correlate with enhanced OTA exposure. In this Account, the following areas are examined: molecular details of the binding of OTA to human serum albumin (HSA), the influences of binding to HSA on the trans-port of OTA across epithelial cell membranes by organic anion transport proteins, the oxidative activation of OTA, and the formation of OTA adducts with biological molecules. These studies are beginning to provide a detailed chemical model for the trans-port, accumulation, and genotoxic and carcinogenic effects of OTA.     

皇后美术馆

皇后美术馆的改建工程对原有的1939年世博会建筑进行了重组，为公众参与艺术、实现多媒介展览和表演空间的多方运用提供了一个全新的视角。