The use of bovine serum protein as an oral support therapy following coronavirus challenge in calves

The objective of this experiment was to investigate the therapeutic efficacy of a supplemental bovine serum protein blend fed to calves challenged with virulent coronavirus. Twelve Holstein bull calves (approximately 3 wk of age) were allocated by initial body weight to Control (n = 5) and treated (n = 7) groups. On d 0, all calves were orally challenged with 1 x 10(7) plaque-forming units of virulent coronavirus isolate. Infection was allowed to progress for 24 h before treatment was started. On d 1, treated calves began receiving 160 g of dry bovine serum powder (16 g IgG) mixed into milk replacer powder (67 g) at both an a.m. and p.m. feeding. Control calves received only milk replacer powder (227 g) at both feedings. Response to coronavirus challenge and dietary treatment was monitored prior to a.m. and p.m. feeding by the collection of multiple clinical measures. Fecal consistency was decreased by coronavirus challenge but was not affected by dietary treatment. Mean daily rectal temperature and heart rate were not affected by dietary treatment. Average packed cell volume was higher in treated calves than in control (35.0 and 27.0%). Coronavirus challenge resulted in an immediate increase in respiration rate, decreasing by d 7. Control calves tended to have a greater average respiration rate compared with treated (28.7 vs. 26.8 breaths/min). Treated calves had a higher average feed intake than control (0.57 vs. 0.44 kg/d). These data suggest that bovine-serum supplemented milk replacer may decrease the severity of disease in young calves exposed to coronavirus.     

Effects of refrigeration and alcohol on the load of Aeromonas hydrophila in oysters

Members of the bacterial genus Aeromonas are widely distributed throughout the environment and are readily cultured from a variety of foods. One member of this genus, Aeromonas hydrophila, has been reputed to be a significant cause of gastrointestinal disease. In this study, we examined the effects of refrigeration and alcohol on the level of A. hydrophila in oysters. Specifically, vodka was examined because it is used by the food service industry in preparation of Oysters Romanoff. One set of oysters was shucked on receipt, whereas others were refrigerated intact for 7 days at 5 degrees C. The oysters were blended and the numbers of A. hydrophila present determined using starch ampicillin agar. Oysters were also shucked and placed on the half shell with 5 ml of vodka for 10 min. The oysters were then washed and presumptive A. hydrophila levels determined in both the washate and homogenate. On the day of purchase, the average number of presumptive A. hydrophila found was 7.6 x 10(4) CFU/g of oyster meat. After 7 days of refrigeration, the average number had increased to 3.2 x 10(5) CFU/g of oyster meat. In the oysters treated with vodka, the average number of A. hydrophila present internally was 9.9 x 10(4) with high numbers (10(3) to 10(4)) isolated from the oyster surface. From these data, it is clear that refrigeration and alcohol treatment are not sufficient to reduce loads of A. hydrophila in or on oysters.     

Reversibly erasable nanoporous anti-reflection coatings from polyelectrolyte multilayers

For nearly two centuries, researchers have sought novel methods to increase light transmission in optical systems, as well as to eliminate unwanted reflections and glare. Anti-reflection coatings and surfaces have enabled the increasing performance demands of optical components fabricated from glass-based optical materials. With the current trend of technology moving towards optically transparent polymeric media and coatings, the need for anti-reflection technology and environmentally benign processing methods for polymeric materials independent of shape or size has become quite apparent. We describe an economical, aqueous-based process controlled at the molecular level that simultaneously coats all surfaces of almost any material. Systematically designed nanoporous polymer films are used, which are suitable for optical applications operating at both visible and near-infrared wavelengths. These high-efficiency anti-reflection coatings are created from phase-separated polyelectrolyte multilayer films that undergo a reversible pH-induced swelling transition. Furthermore, such films, easily patterned by an inkjet printing technique, possess potential for pH-responsive biomaterial and membrane applications.     

Production of thin calcium phosphate coatings from glass source materials

Calcium phosphate (CaP) coatings, from 40 000 to 200 000 nm thick, on titanium and titanium alloy substrates, were produced using radio frequency (RF) sputtering. Such coatings on dental implants have the potential for improving initial bone ingrowth rates. The success of these coatings may allow the movement from two stage implant systems to single stage implant systems, significantly reducing the time required for healing and fixture placement. Glass source materials were developed for the RF sputtering facility and the resultant coatings were characterized and compared to coatings sputtered from a conventional plasma sprayed hydroxyapatite (HA) source material. The coatings were characterized according to their chemistry, crystalline orientation, and residual strain.     

Evaluating 3D bone tissue engineered constructs with different seeding densities using the alamarBlue™ assay and the effect on in vivo bone formation

Bone tissue engineering using patient derived cells seeded onto porous scaffolds has gained much attention in recent years. Evaluating the viability of these 3D constructs is an essential step in optimizing the process. The alamarBlue (aB) assay was evaluated for its potential to follow in vitro cell proliferation on architecturally standardized hydroxyapatite scaffolds. The impact of the aB assayed and seeding density on subsequent in vivo bone formation was investigated. Twelve scaffolds were seeded with various densities from 250 to 2.5×10⁶ cells/scaffold and assay by aB at 5 time points during the 7-day culture period. Twelve additional scaffolds were seeded with 2.5×10⁵ cells/scaffold. Two control and 2 aB treated scaffolds were subcutaneously implanted into each of 6 nude mice for 6 weeks. Four observers ranked bone formation using a pair wise comparison of histological sections form each mouse. The aB assay successfully followed cell proliferation, however, the diffusion kinetics of the 3D constructs must be considered. The influence of in vitro aB treatment on subsequent in vivo bone formation cannot be ruled out but was not shown to be significant in the current study. The aB assay appears to be quite promising for evaluating a maximum or end-point viability of 3D tissue engineered constructs. Finally, higher seeding densities resulted in more observed bone formation.     

A model of traffic crashes in New Zealand

The aim of this study was to examine the changes in the trend and seasonal patterns in fatal crashes in New Zealand in relation to changes in economic conditions between 1970 and 1994. The Harvey and Durbin (Journal of the Royal Statistical Society 149 (3) (1986) 187-227) structural time series model (STSM), an 'unobserved components' class of model, was used to estimate models for quarterly fatal traffic crashes. The dependent variable was modelled as the number of crashes and three variants of the crash rate (crashes per 10,000 km travelled, crashes per 1,000 vehicles, and crashes per 1000 population). Independent variables included in the models were unemployment rate (UER), real gross domestic product per capita, the proportion of motorcycles, the proportion of young males in the population, alcohol consumption per capita, the open road speed limit, and dummy variables for the 1973 and 1979 oil crises and seat belt wearing laws. UERs, real GDP per capita, and alcohol consumption were all significant and important factors in explaining the short-run dynamics of the models. In the long-run, real GDP per capita was directly related to the number of crashes but after controlling for distance travelled was not significant. This suggests increases in income are associated with a short-run reduction in risk but increases in exposure to a crash (i.e. distance travelled) in the long-run. A 1% increase in the open road speed limit was associated with a long-run 0.5% increase in fatal crashes. Substantial reductions in fatal crashes were associated with the 1979 oil crisis and seat belt wearing laws. The 1984 universal seat belt wearing law was associated with a sustained 15.6% reduction in fatal crashes. These road policy factors appeared to have a greater influence on crashes than the role of demographic and economic factors.     

Detection limit of isotope dilution mass spectrometry

The detection limit is an important figure of merit for evaluating instrumentation and analytical methods. While the detection limit for techniques using linear calibration functions has been studied extensively, this fundamental metric has rarely been discussed for mass spectrometry that bases the calibration on the principle of isotope dilution. We have developed a formulation for the detection limit for isotope dilution mass spectrometry (IDMS) after a thorough analysis of the uncertainty of IDMS measurements. The new formulation describes the IDMS detection limit as a function of the enrichment of the isotopic spike and the linear calibration detection limits measured at the masses for the isotope ratio measurement.     

Optimizing the multielement analysis capabilities of an ICP quadrupole mass spectrometer using electrothermal vaporization sample introduction

A mathematical solution and an experimental procedure are described for calculating the maximum number of transient signals, such as those obtained using ETV sample introduction into an ICPMS, that can be monitored by a scanning spectrometer, such as a quadrupole mass analyzer. The total number of masses that can be monitored per ETV firing is shown to be dependent on the values chosen for data collection (i.e., scan time and dwell time) and the necessary limits of detection required by the method. The theory shows the effect that statistical noise, peak shapes, and inconsistent peak appearance times have on the overall variance calculated for the sample concentration based on total counts or "peak area". Also included in the variance calculation is the contribution made by the autosampler as an example of one type of error that is not associated with the data collection parameters. The theory is validated by two experiments where 21 and 68 transient signals are monitored per ETV firing; and as predicted, a 10 ppb sample is accurately quantified with precision better than 9% in both cases.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.